SPECIAL REPAIRS TO BLDG NO P 10 AT PAO QTRS, UNDER GE DEVLALI SCHOOL OF ARTY, UNDER THE AOR OF GE DEOLALI

Amount

Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6), on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified.

M&L for 3mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified.

M&L for 3mm thick wall care putty on ceiling complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika

Supply only chicken wire mesh 22 gauge of size not less than 20X20mm all as specified & as directed by Engineer-in-Charge. Make : Swastik or equivalent as approved

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for Glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

M&L for Vitrified ceramic tiles dark shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per Sl item No 15 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

All as per Sl item No 15 above but Size of Tile exc 0.06 Sqm but n exc 0.11 Sqm complete all as specified and directed.

M&L for 30mm thick PCC 1:2:4 Type B1 using 20mm graded stone aggregate as in levelling course in floor complete all as specified and directed.

M&L for machine cut cudappa stone slab 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.

M&L for Machine cut kota stone slab on steps in single piece of any size 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick Rubber moulded with grey cement and pigment, over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sqm each complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

M&L for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.

M&L for Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.

S&F powder coated anodised aluminium three track frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete as specified and as directed. Note:- Window shall be fixed as per three track frame TD drawings.

S&F powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings such as suitable handle 01 No., locking arangement 01 No. and roller bearings 02 Nos in each shutter etc complete all as specified. Note: Window shall be fixed as per three track frame TD drawings.

S&F powder coated aluminium ventilator shutters with frame not less than 0.60Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

M&L for 4mm thick sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.

S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:), with 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F Mild steel in hold fasts Fe.290.Gde-E-165 complete all as specified.

S&F hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size.

S&F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S&F for aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.

S&F for 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size aluminium anodized handle complete all as specified and as directed.

S&F 100 mm size aluminium anodized handle complete all as specified and as directed.

S&F 250mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

S&F magnet catches with striking plate for closing of cupboard shutters complete all as specified.

Dismantling boarding of any description fixed in any position with nails complete all as specified and directed

M&L for Prelaminated particle board of 18/19mm thick, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination with teak wood leaping fixed with screws as in cupboard shutters of bed room, kitchen and internal shelves complete all as specified.

S&F width of flaps (When open) in 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised.

M&L for preparation of New or old previously untreated wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F in repairs 25mm dia fancy stainless steel curtain rod with fancy fixing brackets, fancy stops/supports, rollers etc. complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe with and including flush pipe and plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified.

S&F in repairs PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed.

S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and as directed.

S&F in repairs 15mm bore two way mixing pillar/sink taps for mixing of hot/fresh water and cold water for WHB/Sink, chromium plated, fancy type with long screwed shanks complete all as specified and as directed.

S&F in repairs 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..

S&F in repairs CP fancy type stop valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and as directed.

S&F in repairs 15mm bore stop valves ,cast copper alloy, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S&F in repairs Health faucet MS chromium plated hanging device fixed complete all as specified and as directed.

S&F in repairs Jet water spary including MS chromium plated hanging device all as directed.

Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc. complete for capacity of tanks 1000 ltrs

S&F new rotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing brass ball valve high pressure with polythene float and fly nut, 20mm bore complete for capacity of tanks 1000 ltrs

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F 15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 25mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in repairs 20mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repairs 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size complete all as specified and as directed.

S&F in repairs CP mixer for mixing (HOT/COLD) water , with wall cap of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed.

S&F in repairs brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs stainless steel soap dish, approximate size 130x120x30mm complete all as specified and as directed.

S&F in repairs fancy type Toilet paper holder, steel chromium plated complete all as specified and as directed.

S&F in repairs 8mm thick glass shelf corner with brackets wall mounted qtr circle type, approximate size 300x220x50mm with SS wire railing complete all as specified and as directed.

S&F in repairs 8mm thick glass shelf corner with brackets wall mounted ractangular type, approximate size 300x150mm with SS wire railing complete all as specified and as directed.

Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

S&F MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

S&F SS tubular framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor upto 1.2Sqm complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5Sqm complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, complete all as specified and as directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.

M & L for RCC (nominal mix) Type B1 1:2:4 (using 20 mm graded stone aggregate) in chajjas.

Use & waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per sr. item No. 102 above but 6mm to 8mm dia.

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling of timber scantlings framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section

M&L for second class hard wood clean swan, timber fixed in scantling of unframed roof work all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to 150mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe including demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement concrete mortar complete all as specified and as directed.

M&L for Reinforced concrete pipes 150mm bore class NP-2, laid and jointed complete with collars, complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil.

Returning, filling in soil including spreading, levelling, watering & well ramming in layers n.exc 25cm.

M&L for Providing, cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and as directed .

M&L for preparation of New or old previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

M&L for Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-

One light point controlled by one switch

One fan point controlled by one switch

One 5 pin socket outlet. 5 Amps on the same board.

One 5 pin socket outlet. 5 Amps on the independent. board

One bell/ buzzer point controlled by one push button

One light point controlled by two two way switches.

All as per item No- 4 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

Supply and fix switch piano modular single pole one way 6 Amps one module complete all as specied .

Supply and fix switch piano modular single pole one way 16 Amps one module complete all as specied .

Supply and fix Modular switch 2 way 6A, 1 modulee complete all as specied .

Supply and fix Modular Bell push 6A 1 module complete all as specified .

Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed.

Supply and fix modular socket outlet 6A - 2/3 pin combined 2 module (multi purpose ) complete all as specified and as directed.

Supply and fix modular socket outlet 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F in replacement of lamp angle/batten holder Bakelite complete all as specified and as directed.

S & F Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.. Make Havels, model- LHDL06160099 (CITY 3)

S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for double side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model- Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj

S &F New E-Lite LED Pride Plus Neo. Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack With 10watt LED tube

Supply and fix fan step regulator, 120W - 2 module for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc complete all as specified and as directed.

Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed of 12Ways

Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed of 4 Ways

Supply and fix MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed.

Supply and fix MCB SP 40 Amps, 240 volts complete all as specified and as directed.

Supply and fix MCB SPN 40 Amps, 240 volts complete all as specified and as directed.

M & L for sub main wiring with 2 single core, 10 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade incl 6.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire and connecting to common earth terminals complete all as specified and directed in PVC conduits Note :-(i) Two run of copper cable and one run of earth wire and PVC conduit shall be measured as one length.

Ditto all as per item No - 138 above but with 2 runs of 4 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed.

M & L for power line sheet metal enclosure double door surface mounting distribution board suitable for MCCB TP/TPN as incomerl for 415 Volts 4 way with 200 Amps bus bar ( without MCCB & MCB) with metal door. Make: L&T, Model- DBVTL004SD

M&L for MCCB TPN 100 Amps, 30 KA, 440V 50Hz, . Make L&T

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Note: Amount of sch of credit of Rs.44,459.58/-will be deducted from total amount of BOQ.

M/S R.K.S. CONSTRUCTION

Alpha Construction

J Sams Contructions