CONSTRUCTION OF A NEW ROOM AND A STORAGE

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/Manual means over areas exceeding depth 30CM and width 1.5M

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing completed

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering and shuttering and finishing and reinforcement work 1:1.5:3

Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, bases of columns etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, Thermo-Mechanically Treated of grade Fe-500D or more

Half Brick work 7 cm thick with common burnt clay F.P.S. (non modular) prop. 1:4

Structural steel work in single section, fixed with or without connecting plat, including hoisting, fixing inposition with a coat of primer

62 mm thick cement concrete flooring with concrete hardener topping,

Brick flat soling

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer and size shall be 600X600 MM

Providing and fixing plain multipurpose cement board(Hight pressure with suitable screws for cement particle board in ceiling 6mm thick cement fibre board

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugations as approved by Engineer-in-charge

12 mm cement plaster of mix :1:4

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content not less than 50Gms/ litre, of approved manufacturer specifications , Two coats on new work

Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface

Finishing walls with two coats Acrylic Smooth exterior paint of required shade : over and including priming coat of exterior primer @ 2020kg/10sqm.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in charge . With float glass thickness 5mm

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coatings of grade AC-15 fixed to existing window frame with CP brass/ stainless steel screws @200mmc/c cutting the grill to proper opening sizes .

Prelaminated particle board with one side decorative and other side balancing laminations, flat pressed 3 layers & graded medium density grade-I, type-II conforming to IS: 12823 25mm thick

Providing wood work in frames of false ceiling, partitions etc. sawn andfixed in position with necessary stainless steel screws . Kiln seasoned and chemically treated Hollock wood

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Powder coated Aluminium thickness of powder coating is 50 micron

Making plinth protection 50MM thick cement concrete 1:3:6 over 75MM thick bed brick ballast well rammed and consolidated and grouted with fine sand including necessary excavation, levelling, dressing and finishing the top surface

Anodized aluminium sliding door bolt 250MMx16MM

Anodized aluminium Tower bolt 150MMx10MM barrel type

Construction of granular sub-base by providing close graded Material conformung to specifications, mixing in a mechanical mix plant at OMC carriage of mixed materials by tippers to work site, for all leads &lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacted with vibratory power roller to achieve the desired density complete as per specification and direction of Engineer-in-charge.

Providing, laying, spreading and compacting graded stone aggregate (size range 53mm to .075 mm ) to wet specification

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hook, with bitumen and GI limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete excluding the cost of purlin, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with Zinc coating not less than 275gm/ sqm.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required to complete as per the direction of Engineer-in-Charge, made of GI wire 4 mm thick

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia

Providing and fixing ISI marked flush door shutters conforming to IS :2202(Part-I) decorative type, core of block frame of 1st class hard wood and well with vertical grains or cross bands and face shutter. 35mm thick including stainless steel butt hinges with necessary screws

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete. 250MM x 16MM

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. Proportion 1:2:4

Supply, installation, fixing, testing and commissioning of 63A, 240V, DP MCCB, with breaking capacity 25 KA, along with Enclosure for the MCCB to be wall mounted. Conforms to IS/IEC 60947-2 and IEC 60947-2, and wiring for power supply in both incoming and outgoing with earthing. Make: L&T, Schneider, ABB, Havells, Legrand . All materials are in the scope of the contactor

Supply and laying of following size Armoured Power PVC LT Aluminium conductor cable 1100V grade as per IS 7098 (Part 1) 1988 or as latest amendment. (Havells/ KEI/ RPG/ CCI/ Polycab/ Finolex make) 2 Core x 6 sqmm

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to 1S-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Make: Finolex /Havells/Polycab/RR Kabel /including surface wiring with Flat ISI Marked PVC Casing n Caping (Make: Berlia/ AKG / Precision/ Presto Plast/Polycab including earth continuity. All materials are under the scope of the cotractor

With 2 x 4 sq. mm. + earth continuity with [Mtr. 1x2.5 sq. mm. cable in Flat 32mm ISI Marked PVC 'Casing' n 'Capping'

Wiring for Indoor lighting/ wall mounted fan/ceiling fan with 3x1.5 sg mm P.V.C.insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS- 694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Make: Finolex\ /Havells/RR Kabel /Polycab) with flat 25 mm ISI marked casing 'n' capping (Make: AKG / Precision/ Presto Plast/Polycab) in surface wiring system, including 6 Amp flush type switch/ bell push,(Make: Anchor/Kolor kany.Kom/ Havells/MK ) and PVC/Backelite Switch Board (Make: Presto Plast/Havells/Linx/Anchor/) as approved and directed by the Deptt.). All materials are under the scope of the contractor.

Medium point upto 6.00 metre length

Long point upto 10.00 metre length

Wiring for 5 pin 16 Amps plug point with 2x4 sq. Mm P.V.C. Insulated single core unsheathedindustrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed elctrolytic copper conductorfor voltage grade up to 1100 volts (Make : Finolex /Havells /RR Kabel /Polycab /Anchor) with flat 25 mm ISI marked cashing 'n' capping (Make : AKG /Precision /Presto Plast /Polycab) in surface system, including 5 pin 16 Amps flush type plug socket and 16 Amps F/T switch (Make : Anchor penta /Gold medal /Kolor kany.com /Havells) and PVC/Backelite Switch Board (Make : Presto Plast /Havells /Linx /Anchor) including earth continuity with 2.5 sq. mm cable to third pin of the plug socket etc. as required complete, when placed elsewhere. All materials are under the scope of the contactor. Medium point up to 6.00 metre length

Wiring for 5 pin 5/6 Amps plug point with 2X4 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to 1S-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Make: Finolex /Havells/RR Kabel/Polycab / Anchor) with flat 25 mm ISI marked casing 'n' capping (Make: AKG / Precision/ Presto Plast/Polycab/) in surface system, including 5 pin 16 Amps flush type plug socket and 16 Amps F/T switch (Make:Anchor penta /Gold medal /Kolor kany.Kom/Havells) and PVC/Backelite Switch Board (Make: Presto Plast/Havells/Linx/Anchor/) including earth continuity with 2.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. All materials are under the scope of the contractor. Medium point upto 6.00 metre length

Supply, Installation, fixing, testing and Commissioning of 1X20 Watt, 6000K LED tube light with ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient ready to use pack as per the relevent is with latest amendment, with all accessories for lighting with necessary wiring, earthing, providing celling rose etc as required to be mounted in the wall and as directed by the department. Make: Havells make (Cat No. LHEXBLP7PN1W020) or equivalent make of Bajaj /Philips / Crompton Greaves . All materials is in the scope of the contactor

(Supplying including fitting of A.C. Ceiling fan No. of 1200mm sweep complete with all accessories like regulator, down rod, canopy etc. with making necessary wiring connection of cable, as approved by the Deptt as required complete and as directed by the Department. (ORIENT PSPO / Usha /CROMPTON / Havells/ Bajaj/ V GAURD/Luminous). All materials are in the scope of the contractor.

Supply, installation & fixing of 10Module, SPN,MCB DB, with single door made up of CRCA sheet steel powder coated enclosure, with all accessories for connections such as DIN Rail, Neutral Link, Earthing connection nob, glanding etc. Conforms to IS with latest amendment of make Legrand/L&T/Havells/Schneider/ABB/Siemens. All materials are in the scope of the contractor.

(Supply, fixing, testing and commissioning No.with necessary wiring for power supply in both incomming and outgoing for 240 V, 50Hz, SP, 32A MCB, breaking capacity not less than 10KA, C-curve type with necessary wiring and earthing. Make:Legrand/L&T/Havells/ Schneider/ ABB. All materials are in the scope of the contractor.

Supplying with installation, testing and commissioning of 1.5 Ton Hi-- wall 5 STAR rating non ducted split type inverter air conditioner for the rooms of Advisor, APL and Project conference room with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.upto 5m between the room unit and out door unit as directed by the department. Make:LG(Model No:KS-Q12YNZA) or equivalent make of Voltas/ Samsung / Bluestar/ Godrej/ Carrier. The Air-conditioner should have a minimum 1 Year warranty on product and 5 Years on compressor. All materials are in the scope of the contactor.

Supply, installation, testing and commissioning of Earth Electrode with perforated 3 Mtr. Long, 50 Mtr. Dia, Gl Pipe as per IS: 3043 including all accessories like GI nut bolts, reducer, nipple , wire messed funnel, Gl strip of 25mm X 3mm etc. and providing messonary with 2 ft under ground and 1 feet over ground enclosure with cover plate. All materials are in the scope of the contractor.

Supply, laying, clamping and fixing (1 coreX10 Sg. mm) armoured alluminium conductor for connecting the earth electrode through (25mmX5mm) G.I. earth strip including connection, soldering etc. complete as per IS with latest amendment and as requird and directed by the department. All materials are in the scope of the contractor.

SHRI NITU SONOWAL

B.G. Enterprises