Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹16.9 L+₹15,477.50 (0.92%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹17.0 L+₹24,866 (1.49%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹17.1 L+₹34,903.28 (2.09%)Rejected-Finance VILLAGE SEKHA PO MAGAR MUDIAN TEH DISTT GURDASPUR PB | GURDASPUR | GURDASPUR | PUNJAB | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹17.7 L+₹91,657 (5.48%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹16.9 L
EMD Value
₹33,760
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri)
Provn of certain revenue and minor works at Tibri Mil Stn.
2022_MES_572424_1
GE GSR-66/2022-2023
Open Tender
Civil Works
Item Rate
120 days
GE Gurdaspur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹33,760
Yes
3 Mar 2023
31 Dec 2022
28 Jan 2023
31 Dec 2022
21 Jan 2023
16 Jan 2023
Amount
Excavating in trenches, n exc 1.5m wide and n. exc. 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n. exc. 10 sqm on plan and n. exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil
Returning filling in the soil including spreading, levelling, watering and well ramming in layer n.exc 25cm thick each layer complete all as specified and directed.
Removing excavated soil to a distance not exc 50m away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Removing excavated soil to a distance exc. 250 m but n. exc. 250m and depositing where directed at a level not exc 1.5m above the starting point
M&L for Plain cement concrete 1:3:6 type C-2 (using 40 mm graded brocken stone aggregate) as in foundation etc complete all as specified and as directed.
M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L 40mm thick Damp proof course in Cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork
M&L for brick work with sub class "B" old size bricks straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed
M&L for brick work with sub class 'B' old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement morter 1:4 complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and fair complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed
M&L for rendering 5 mm thick on fair faces of reinforced concrete surfaces on walls in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed
M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed.
Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc
Cutting openings, through brick walls built in CM for door, window and other openings or enlarging existing opening , converting window into door openings, etc or cutting out defective brick work for under -pinning, including providing, fixing and removing shoring, removing rubbish to exc 50m complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed
S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers, and binders cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or scouring with clips.
M&L for cement concrete in foundation filling and mass concrete 1:5:10 type E-2 (using 40 mm stoneaggregate) complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor finishing fair and even complete all as spd.
M&L for 75mm thick coment concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection/ path complete all as specified and directed.
S&F vitrified ceramic coloured tiles 10mm thick size 600mm x 600mm in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Make: Kajaria vulcano beige premium or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F vitrified ceramic coloured tiles 10mm thick size 600mm x 600mm in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Make: Kajaria Oslo Marfil Matt premium or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F vitrified ceramic coloured tiles 10mm thick size 200 x 1200mm in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Make: Kajaria Manhattan teak premium or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F glazed ceramic coloured tiles 10mm thick, size 800mm x1600mm on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including 10mm thick rendering in CM 1:4 on brick surface complete all as specified and directed. Make: Asian Granito India Ltd Velsa Natural premium or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F glazed ceramic coloured tiles 10mm thick, size 800mmx 1600mm on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering in CM 1:4 on brick surface complete all as specified and directed. Make: Asian Granito India Ltd Bresscia Beige premium or equivalent of makes as pert Appx. 'B' as approved by GE.
Material and labour for providing and fixing Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
S & F PVC insulation panel 10mm thick with EPS stuck to 1mm printed pvc sheet suitably placed in false ceiling grid
M&L for providing and fixing gypsum board 12mm thick in ceiling fixed with screws as per manufacturer instructions.
Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqm but not exceeding 4 Sqm with shutters ( without taking off shutters from the frames) complete all as specified and directed
S&F Ist class hardwood (sal) plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed.
S&F 2nd class hard wood 40mm thick panelled shutter (any number of panels), with panels of timber flat on both sides (feather edged) and moulded framing on both sides complete all as specified as directed.
S&F 35mm thick Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides, both faces covered with decorative face veneer with lipping/ frame to match complete all as specified and directed.
S&F Sheet glass, 5.5mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed with nails complete all as specified and directed
M&L for moulding of 1st class soft wood sectional area n. exc 6 sqcm including fixing with screws to wall/ pillar in brick or concrete surfaces complete all as specified and directed.
S&F 2 lever mortice lock , vertical type size 100mm made of stainless steel complete all as specified and directed.
S&F 100mm long butt hinges medium weight , cold rolled mild steel.
S&F 100mm long butt hinges stainless steel.
S&F 200mm aluminium, anodised, barrel tower bolts of extruded section.
S&F 200mm stainless steel tower bolts fancy type
S&F 150mm aluminium, anodised, barrel tower bolts of extruded section.
S&F 200 mm stainless steel handle fancy type complete all as specified and directed.
M&L for applying 2mm thick wall care putty on wall complete all as specified and directed.
M&L for applying 2mm thick wall care putty on ceiling complete all as specified and directed.
M&L for preparation of new surface and applying two coats of oil bound distemper on walls including one coat of primer complete all as specified and directed
M&L for preparation of new surface and applying two coats of oil bound distemper on ceiling including one coat of primer complete all as specified and directed
M&L for preparation of surface and applying a coat of texture paint over a coat of base coat over a coat of primer on wall of desin pattern complete all as specified and as directed.
M&L two coats of synthetic enamel deco paint on wooden surfaces of any description over 10 cm in width or girth not otherwise described over a coat of pink primer with spray machine including prepration of surfaces.
M&L for 20mm thick commercial plywood board water proof prelaminated cup board shutter as per directed by Engr-in-Charge.
S&F stainless steel auto close/ hydraulic hinge suitable for cup board shutter of not exc 0.50 sqm area complete all as specified and as directed.
S&F stainless steel handle 125mm complete all as specified and directed.
M & L for reinforced cement concrete 1: ½ :3 type A-1, (using 20 mm graded stone aggregate) nominal mix, as in beams, cantilevers, bressummers, lintels over 1.5m span.
M &L for reinforced cement concrete 1: ½ :3 type A-1 (using 20mm gradded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the like.
M &L for reinforced cement concrete 1: ½ :3 type A-1 (using 20mm gradded stone aggregate) as in chhajjas complete all as specified and directed.
M&L for form work, rough finished flat surfaces, to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams etc complete all as specified.
M&L for form work, rough finished flat surfaces, to soffits of suspended slab such as roof slab, floor slab, landings and chajjas etc. not exc. 200mm thick (Horizontal or sloping) complete.
M&L for formwork, rough finished surfaces of concrete, to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide
Spreading and levelling earth, in layers n exc 25cm thick well ramming including watering as required.
M&L Hardcore of broken bricks, gauge n exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface.
M&L Granite (of any type) work (table rubbed and polished) 16 to 20mm thick in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4.
Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 ltre / 10sqm over new surface after prepairing surface.
M&L for Preparation of newly plastered surface and applying three coat of white wash as on ceiling.
S&F 25mm dia GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.
S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball, minimum weight 210gms complete all as specified and directed
S&F 15mm bore stop cock cast copper alloy fancy type CP screwed down high pressure with crutch or butterfly handle complete.
S&F 20mm bore stop cock cast copper alloy fancy type CP screwed down high pressure with crutch or butterfly handle complete.
S&F 300mm long aluminium alloy anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed
S&F rimless blind wall hung vitreous china WC (white matt) size 375x520x400mm with UF soft close slim seat cover, hinges, accessories complete all as specified. Make: Jaquar cat part No. SLS-WHM-6953 BIUFSM or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F rimless blind wall hung vitreous china WC (black matt) size 375x520x400mm with UF soft close slim seat cover, hinges, accessories complete all as specified. Make: Jaquar cat part No. SLS-BLM -6953 BIUFSM or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F vitreous china thin rim table top basin square, white size 420x420x150mm including waste pipe complete all as specified. Make: Jaquar cat part no JDS-WHM-25911 or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F vitreous china thin rim table top basin square, black size 420x420x150mm including waste pipe complete all as specified. Make: Jaquar cat part No. JDS-BLM-25911 or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass concealed body for single lever high flow diverter with button assemblycomplete all as specified. Make: Jaquar cat part No. ALD-CHR-079N or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass CP single lever exposed parts kit of hi flow diverter consisting of operating lever, cartridge sleeve, wall flange (with seals), button assembly sleeve & button complete all as specified. Make: Jaquar cat part No. OPP-CHR-15079NKPM or equivalent of make as pert Appx. 'B' as approved by GE.
S&F brass black matt single lever exposed part kit of hi flow diverter consisting of operating lever, cartridge sleeve, wall flange (with seals), button assembly sleeve & button complete all as specified. Make: Jaquar cat part No OPP-BLM-15079NKPM or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass CP opal prime bathtub spout with flange complete all as specified. Make: Jaquar cat part No SPJ - BCH - 15429PM or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass black opal prime bathtub spout with flange complete all as specified. Make: Jaquar cat part No. SPJ - BLM - 15429PM or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F maze overhead shower 300mm dia round shape single flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System including shower arm 20mm bore & 300mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Stainless Steel Flange. Make: Jaquar: Shower cat part no OHS -SSF-1633, Arm cat part no SHA - BCH - 479L450 or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F black maze overhead shower 300mm dia round shape single flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System including shower arm 20mm bore & 300mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Stainless Steel Flange. Make: Jaquar: Shower cat part no OHS -GRF-1633, Arm cat part no SHA - BLM - 479L450 or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass Concealed Stop Cock regular Body suitable for 20 mm pipe with protection Cap (without Exposed Parts) complete all as specified. Make: Jaquar cat part No. ALD-CHR-089 or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass CP exposed part kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal complete all as specified. Make: Jaquar cat part No. OPP-CHR-15083KPM or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass CP angle valve with wall flange complete all as specified. Make: Jaquar cat part No OPP-CHR-15053PM or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass black angle valve with wall flange complete all as specified. Make: Jaquar cat part No. OPP-BLM-15053PM or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass CP click clack waste coupling 32mm size complete all as specified. Make: Jaquar cat part No. ALD -WHM -727 or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass black click clack waste coupling 32mm size complete all as specified. Make: Jaquar cat part No. ALD -GRF -727 or equivalent of makes as per Appx. 'B' as approved by GE.
S&F brass CP single lever high neck basin mixer with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses complete all as specified. Make: Jaquar cat part No. OPP- CHR-15005BPM or equivalent of makes as per Appx. 'B' as approved by GE.
S&F brass black single lever high neck basin mixer with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses complete all as specified. Make: Jaguar cat part No. OPP- BLM-15005BPM or equivalent of makes as per Appx. 'B' as approved by GE.
S&F brass CP health faucet hand shower (health faucet) with 8mm dia, 1.2 m long flexible tube & wall hook complete all as specified. Make: Jaquar cat part no- ALD-BCH-573, or equivalent of makes as pert Appx. 'B' as approved by GE.
S&F brass black health faucet hand shower (health faucet) with 8mm dia, 1.2 m long flexible tube & wall hook complete all as specified. Make: Jaguar cat part No. ALD-BLM-573 or equivalent of makes as pert Appx. 'B' as approved by GE.
M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described over pink primer including prepration of surfaces.
S&F 110mm bore PVC (SWR) pipes single socketed in any length fixed to walls or laid in floors including all fittings complete all as specified and directed by Engineer-in-charge
S&F 110mm bore PVC (SWR) bends any radius with access door
S&F 110 mm bore( SWR) vent cowl
M&L 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S&F 12mm thick frosted glass including fancy type handles, hinges with all accessories as approved by GE.
A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
Gurjit const co
P S BUILDERS
GORAYA AND CO
J S MAAN ENTERPRISES
multani construction co
talwinder singh and co
kaushal builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .