Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bid | |
| 2 | L2₹39.7 L+₹1.9 L (4.98%)Rejected-AOC | L2 | Rejected-AOC Being higher than L1 Bid | |
| 3 | L3₹39.9 L+₹2.1 L (5.65%)Rejected-AOC | L3 | Rejected-AOC Being higher than L1 Bid | |
| 4 | L4₹40.3 L+₹2.5 L (6.73%)Rejected-AOC KALIBARI BAZAR TUPKHANA PART I PO ARUNACHAL P S SILCHAR DISTT CACHAR ASSAM 788 025 | SILCHAR | CACHAR | ASSAM | 788025 | L4 | Rejected-AOC Being higher than L1 Bid | |
| 5 | L5₹40.6 L+₹2.8 L (7.33%)Rejected-AOC | L5 | Rejected-AOC Being higher than L1 Bid |
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
3 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SILCHAR
GE SILCHAR, PO-ARUNACHAL, DIST-CACHAR, ASSAM-788025
REPAIR AND CLEANING OF SEWAGE LINES SEPTIC TANK ETC AND PATH INCL COMPREHENSIVE MAINTENANCETO CERTAIN BUILDINGS AT AIZAWL UNDER GE SILCHAR
2022_MES_555691_1
8741/E8
Open Tender
Civil Works - Others
Item Rate
270 days
AIZAWL
Class D Category a i and a ii
7 documents required · 7 mandatory
₹500
GE SILCHAR
₹79,000
Yes
9 Nov 2022
3 Oct 2022
4 Nov 2022
3 Oct 2022
3 Nov 2022
17 Oct 2022
Amount
PART-I (B/R WORKS) Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and directed.
Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for(reinforcement cut as required to facilitate demolition complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Taking down cement plaster on brick/concrete surfaces incl raking out joints, hacking for key scrubbing down with water complete all as specified and directed.
Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.
Taking down Chowkhats or frames, size not exc 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specifed and directed
Taking down Chowkhats or frames, size exc 1.5 sqm but n exc 4.0 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Demolition and breaking up drain pipes 100 to 150 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specifed and directed
Dismantling timber scantlings 40 sq. cm and over in section, in any position, unframed work, etc complete all as specifed and directed
Dismantling posts or struts (wood, steel or R.C.C.) embedded in Cement concrete any section, including taking out embedded portion and making good disturbed ground embedded in Cement concrete incl demolition of PCC complete all as specified.
Dismantling fencing wire mesh, any type complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections complete all as specifed and directed
Taking up or down 20 mm bore steel tubing and connections complete all as specifed and directed
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.
Dismantling of timber fillets rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position in unframed work etc complete all as directed.
M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete etc complete all as specified and directed.
M&L PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete etc complete all as specified and directed.
M&L PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete etc complete all as specified and directed.
M & L for stone masonry walling of squared rubble, regular coursed coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
M & L for Brickwork built in CM 1:6 with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius complete all as specified and directed.
M & L for Brickwork built in CM 1:4 with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.
M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade made out of grey cement & no pigment over & incl 50 mm thick dry fine sand cushioning complete all as specified and directed.
M&L Plain cement concrete 1:3:6 type C-1, (using 20 mm graded stone aggregate) as in bed blocks, holdfast blocks, coping, lintels upto 1.5m clear span, cills, lin steps, kneelers, bed plates, apex stones kerbs benching and similar work including necessary form work complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in alternate panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed.
M&L for 50mm thick PCC 1:2:4, type C-1, (using 20 mm graded stone aggregate) finished the surface even and smooth without using extra cement, as in floor finished even & smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C 2 (using 40 mm graded stone aggregate) finished the surface even and fair, as in sub- base to floors/ paths and pavements complete all as specified and directed.
M&L for sand cushioing under paver blockincl water and well ramming complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying one coat of cement based paint complete all as specified and directed.
M&L for 75mm thick PCC 1:2:4 type C -1 (using 20 mm graded stone aggregate)as in floor finished the surface even smooth without using extra cement complete all as specified and directed.
M&L for 100 mm thick PCC 1:4:8 type D- (using 40 mm graded stone aggregate) finished the surface even and fair, as in sub- base to floors/ paths and pavements complete all as specified and directed.
M&L for PCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) finished the surface even and fair, as in hardstanding and pavements complete all as specified and directed.
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and directed.
S & F Second class hardwood in scantling, wrought, in unframed work fixed as in repairs to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions complete all as specified and directed.
S & F Second class hardwood in scantling, clean sawn, in framed work fixed as in repairs to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions complete all as specified and directed.
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed
S & F 0.63 mm thick corrugated galvanised steel sheetings with two corrugation side lap fixed with ‘L’ type or ‘J’ type cranked hook bolts, nuts and washers as in roof , wall etc with grade of zinc coating 275 gm/sqm complete all as specifed and directed
S & F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gm/sqm complete all as specified and directed.
M&L for Providing precast cement concrete in PCC 1:1.5:3 type B-1 using 20 mm graded aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces incl formwork, complete all as specified and directed.
M&L for Reinforced cement concrete in PCC 1:1.5:3 type B-1 using 20 mm graded aggregate as in as in Slab s upported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surface complete all as specified and directed.
Material and labour for TMT bars10mm dia and over , cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
Material and labour for plain cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregates as in surface channel and drain complete all as specified.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends complete all as specified.
Taking down aluminium door shutters of size exc 1 sqm but not exc 2 sqm each from frame, deassembling all parts (e.g. styles, rails etc), replacement of unserviceable parts (e.g. glass, gasket, screws etc) and reassembling all parts, tightening of internal and external screws, resecuring and refixing in position complete all as specified and directed. Note : Glass (if required to be changed) to be measured separately
Taking down aluminium door shutters of size exc 2 sqm each from frame, deassembling all parts (e.g. styles, rails etc), replacement of unserviceable parts (e.g. glass, gasket, screws etc) and reassembling all parts, tightening of internal and external screws, resecuring and refixing in position complete all as specified and directed. Note : Glass (if required to be changed) to be measured separately
Supply and fix 3 ways sliding Anodised aluminium glazed window shutter with frame with the following specification (a) Window frame 3 track of size 95mm x 25mm x 1.5mm Thick (b) Stiles and rails of size 35mm x25mm x1.5mm (c) PVC gasket with 4mm thick tinted glass, incl aluminium handles with necessary locking arrangement for 02 Nos glazed shutter (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples including aluminium handles with necessary lockinng arrangement for 01 No gauzed shutter. Note :- Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive.
M&L for 2nd class hard wood, 35 mm thick, plain framed panelled shutter (any numbers of panel) with panels of timber flat on both sides (feather edged) or 12 mm thick veneered particle board medium densitywood particle board with commercial face veneers supplied & fitted to chowkats or frames etc complete all as specifed and directed
S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a), fitted to chowkat etc complete all as specifed and directed
S&F 2nd class hard wood, 30 mm thick, glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided in to squares, with plain chamfered or rounded, mitered and rebated sash bars sizes of members of shutters as specified in SSR part I, Section 8, Clause No 8.20 (b) and fitted to chowkat etc complete all as specifed and directed
S&F 2nd class hard wood, 30 mm thick,Flush shutters, solid core construction, with block board core , both faces is covered with deco rative face veneer with lipping/frame to match fitted to chowkat etc complete all as specifed and directed
S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, etc complete all as specifed and directed
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, etc complete all as specifed and directed
S & F Butt hinges, medium weight, cold rolled mild steel, and fixed, size of hinges 100 mm, complete all as specifed and directed
S & F for Butt hinges, medium weight, cold rolled mild steel, and fixed, size of hinges 75 mm complete all as specifed and directed
S&F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt 200 mm, complete all as specifed and directed
S&F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt 150 mm, complete all as specifed and directed
S & F Aluminium handles, cast type, anodised, Size of handle 150 mm, complete all as specifed and directed
S & F Aluminium handles, cast type, anodised, Size of handle 100 mm, complete all as specified and directed.
S & F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 300 mm, complete all as specified and directed.
S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.
M&L for 3 mm thick,Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.
M&L for 4.8 mm thick, plain Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed in repairs, complete all as specified and directed.
M&L for 5.5 mm thick, plain Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed in repairs, complete all as specified and directed.
M & L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc 6 & n exc 13 sqcm, complete all as specified and directed.
M & L for 2nd class hardwood plain fillets ,square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc 6 & n exc 13 sqcm, complete all as specified and directed.
M & L for 4 mm thick, Asbestos cement plain building boards, fixed to timber framework with screws, etc and applying two coats of white wash complete all as specified and directed.
M & L for vitrified ceramic tiles, coloured (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 incl brushing the surface with neat cement slurry 3 kg / sqm, complete all as specified and directed.
Material and labour for reflective type rubber moulded chequered cement concrete tiles 300x300x25mm etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the tile over & incl 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed.
Material and labour for chequered cement concrete tiles 200x200x25mm etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the tile over & incl 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed.
M & L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover & incl 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 incl brushing the surface with neat cement slurry 3 kg / sqm, complete all as specified and directed.
M & L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover & incl 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 incl brushing the surface with neat cement slurry 3 kg / sqm, complete all as specified and directed.
M & L for coloured , glazed ceramic tiles in vertical surface 300x450x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match & incl 10 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 incl brushing the surface with neat cement slurry 3 kg / sqm, complete all as specified and directed.
M & L for coloured , glazed ceramic tiles in vertical surface 200x300x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match & incl 10 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 incl brushing the surface with neat cement slurry 3 kg / sqm, complete all as specified and directed.
M&L for Rendering 15mm thick in two layers [base layer 10mm IN CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] using water proofing compound in IInd layer only on brick work or concrete surfaces of wall, surfaces finished even and fair complete all as specified & directed. Note : WPC shall not be measured and paid separately
Material and labour for rendering 15 mm thick in cement mortar(1:6) to other side of lathing finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M & L for 15 mm bore GI Tubes, medium grade, with all fitting fixed to walls and ceilings or in floors complete all as specified and directed.
M & L for 20 mm bore GI Tubes, medium grade, with all fitting fixed to walls and ceilings or in floors complete all as specified and directed.
Fixing only 15 mm bore GI tube of any grade retrieved from taking down after cleaning with new fittings to walls and ceilings or laying in floors ,with new GI fittings complete all as specified and directed.
Fixing only 20 mm bore GI tube of any grade retrieved from taking down after cleaning with new fittings to walls and ceilings or laying in floors with new GI fittings complete all as specified and directed.
Supply and fix as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
Supply and fix as in repairs vitreous china squatting pan of Orrisa pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap and cement concrete bedding connection making good to floor all as specified.
Supply and fix, as in repair, vitreous china wash basin, wall hung basin with fixing accessories of size 560 x 430 x195 mm full padestal type white , excluding taps, waste chain, plug and porcelain stopper , cutting for and pinning in complete all as specified and directed. Make Jaquar Cat part No CNS-WHT-303 & CNS-WHT-811 or equivalent make as approved by GE
S&F as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets etc complete all as specified and directed.
M & L for 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, etc complete all as specified and directed.
S&F as in repair, 15 mm bore bib taps,chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.
S&F as in repair, stop valve, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions etc complete all as specified and directed.
S&F as in repair, 15 mm bore bib taps, PTMTof any colour, screwed down, screwed for iron pipe or brass ferrule (Min wt-90 gms) etc complete all as specified and directed.
Supply and fix 15 mm bore , Gun-metal, gate valves, with iron wheel head, screwed both ends on G1 pipes with GI union fixed in existing/ new location including removing old unserviceable complete all as specified and directed.
Supply and fix 20 mm bore Gun-metal, gate valves, with iron wheel head, screwed both ends on G1 pipes with GI union fixed in existing/ new location including removing old unserviceable complete all as specified and directed.
S & F for PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.
S & F in repairs Chromium plated health faucet with or without swivel joints of any colour for fixing with 15mm pipe. (Minimum weight 40gms) with connecting pipe 15 mm size, minimum 1000mm long with hanger of PTMT any colour and necessary fixtures complete all as specified and directed. Make : Hindware Cat Part No F160027 or equivalent product of Jaquar/Marc
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fix, Vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement,water water spreader, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
Supply & fix, as in repairs, Swivel shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40gms) with & incl Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour(Minimum weight 40 gms) including fixing to steel pipe or union etc complete all as specified and directed.
S&F in repairs for Aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
S&F for bitumen based water proofing tape reinforced with polyster film below aluminium film having 95mm width and minimum thickness of 1.5mm laid on roof surfaces by forced application including cleaning of surfaces complete all as specified and directed.
S&F for bitumen based water proofing film reinforced with PVC film having minimum thickness of 0.6mm laid on roof surfaces by forced application including cleaning of surfaces complete all as specified and directed.
S & F in repairs Aluminium 4 levers Mortice lock, vertical type, size 75 mm complete all as specified and directed.
S& F in repairs for 150 mm length of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S & F for PVC (SWR) pipes 110 mm mm bore single socketed, in any length with rubber ring joints, fixed to walls or laid in floor or as in trenches including jointing with solvent cement complete all as specified and directed.
S & F for PVC (SWR) pipes 75 mm mm bore single socketed, in any length with rubber ring joints, fixed to walls or laid in floor or as in trenches including jointing with solvent cement complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius with oval acces door including jointing with solvent cement complete all as specified and directed.
S & F for PVC (SWR) junction single, (Single T) equal or unequal, bore of pipe in 110 mm, including jointing with solvent cement complete all as specified and directed.
S & F for 75 mm, bore PVC (SWR) vent cowl, including jointing with solvent cement complete all as specified and directed.
S & F for 100 mm bore PVC (SWR) 'P' trap including jointing with solvent cement complete all as specified and directed.
S & F for 100 mm bore PVC (SWR) floor trap / nahani trap , plain with grating including jointing with solvent cement complete all as specified and directed.
M & L for 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe fixed in repairs complete all as specified and directed.
S & F Toilet paper holder, vitreous China, white, box type complete all as specified and directed
S&F in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repairs of CP Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.
S & F for 150mm dia, 1mm thick mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges, complete all as specified and directed.
Disconnecting existing tanks of capacity 250 litre to 500 litre from water supply conections, setting aside (or lowering if required) for repairs, cleaning, etc. and rehoisting if required reconnecting and re-fixing in position incl cleaning removing all scale & dirt from tank & mouth of circulating Pipe & finally cleaning with thick mixture of bleaching powder & water & testing for any leakage & writing date of cleaning with thick synthetixc enamel paint complete all as specified and directed.
Disconnecting existing tanks of capacity 500 litre to 1000 litre from water supply conections, setting aside (or lowering if required) for repairs, cleaning, etc. and rehoisting if required reconnecting and re-fixing in position incl cleaning removing all scale & dirt from tank & mouth of circulating Pipe & finally cleaning with thick mixture of bleaching powder & water & testing for any leakage & writing date of cleaning with thick synthetixc enamel paint complete all as specified and directed.
Disconnecting existing tanks of capacity 1000 litre to 2000 litre from water supply conections, setting aside (or lowering if required) for repairs, cleaning, etc. and rehoisting , reconnecting and re-fixing in position incl cleaning removing all scale & dirt from tank & mouth of circulating Pipe & finally cleaning with thick mixture of bleaching powder & water & testing for any leakage & writing date of cleaning with thick synthetixc enamel paint complete all as specified and directed.
Supply and fix 500 Ltr Rotaional moulded polyethylene water storage tank cylindrical vertical with closed top hoisted and fixed in position including dismantling water tank any type and any position from site of capacity 500 liters complete all as specified and directed.
Supply and fix 1000 Ltr Rotaional moulded polyethylene water storage tank cylindrical vertical with closed top hoisted and fixed in position including dismantling water tank any type and any position from site of capacity 1000 liters complete all as specified and directed.
Supply and fix 2000 Ltr Rotaional moulded polyethylene water storage tank cylindrical vertical with closed top hoisted and fixed in position including dismantling water tank any type and any position from site of capacity 500 liters complete all as specified and directed.
S & F rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240,etc complete all as specified and directed.
Material and labour for pre-painted designer false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mm x 600 mm with main runner 38mm x 24mm and wall angle 24mm x 24mm using 4mm thick High Pressure Non Asbestos Fibre Cement prepainted decorative board (E-Board Classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220mm maximum c/c the last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall, Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to fom 600mm x 600mm grid and painted with two coats of acrylic emulsion paint of approved shed/make over a coat of cement primer before installing it on the grid complete all as specified and directed. Make:- Everest Industries Ltd or equivalent as per IS-14862.
Materials and Labour for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe -290-Gde E-165 complete all as specified and directed.
Supply only Chain link fencing 4 mm dia galvanised steel wire complete all as specified and directed. Note:- Payment of line wire, bolts and nuts to be paid separately under item No. 16 and 17 above.
Fixing only of chain link fencing incl. line wires any mesh and type to any of standards rails, straining bolts etc including provision of binding wire complete all as specified and directed.
Restraining & rescuring only of galvanised barbed including or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed (each line wire to be measured).
Supply and Fix for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long & dia 11 to 15 mm. complete all as specified and directed
Cleaning/desludging completely of solid / liquid sludge by pumping mechanically from inside the soakage well and removal and disposal of sludge outside of low laying area in Defence Land by sludge remover tanker truck as directed by Engr- In- Charge including spreading bleaching powder inside and surrounding pit complete all as specified.
Cleaning of 110 to 200 mm dia PVC pipe , SGSW drain pipe , RCC Hume pipe , cast iron pipe of any dia by rodding with sectional sewer rod / flexible sewer rod / bucket etc. throughly from inspection chamber to manhole or from one manhole to another manhole of any depth and size and well flushing with water after cleaning and including removal of sludge and other materials obtained from cleaning the drain pipe and manhole garbage to a pit made for this purpose and filling up to the earth complete all as specified.
Cleaning of choked WC and inspection chamber by using rubber pump and rod including removal of sludge and other foreign materials complete all as specified.
Cleaning of following septic tank for liquid sewage and disposal of sludge by pumping and removing away by putting hose pipe complete all as specified.
For 10 Users
For 25 Users
For 50 Users
Opening of blockage at floor trap , urinal, wash basin etc. by rubber pump & rod and proper disposal of debris / sludge during cleaning complete all as specified.
M&L for preparation of old decorated surfaces of walls including cornices (plastered or unplastered) and applying one coat of white wash complete all as specifed and directed
M&L for preparation of old decorated surfaces of ceiling (plastered or unplastered) and applying one coat of white wash complete all as specified and directed.
M&L for preperation of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of wood base surfaces of any description over 10cm in width or girth and applying minimum two coats of varnish over one coat of oil based stainer to achieve high glow finish complete all as specifed and directed
M&L for writing letters or figures (BLOCK, Roman, Italic or Indian) 5cm high with thick paint complete all as specified and directed.
M & L for preparation of old treated plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.
M & L for preparation of old treated plastered ceiling surfaces and applying two coats of oil bound distemper complete all as specified and directed.
M & L for preparation of newly or previously untreated plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer over & incl 1 mm thick puty to make the surface even & smooth complete all as specified and directed.
M&L for two coats of synthetic enamel painting to wooden surfaces of any description exc 10cm width or girth over a coat ofpink primer incl preparation of new steel surface etc complete all as specified and directed.
M&L for two coats of synthetic enamel painting to iron and steel surfaces over 10 cm width and girth over a coat of red oxide primer incl preparation of new steel surface etc complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over one coat of alkali resistance primer as per manufacturer's instructions complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying one coat of cement based paint complete all as specified and directed.
PART-II (E/M WORKS) Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete (all serviceable fittings such as switches, ceiling roses, pendents sockets, light fittings DBs etc to be measured separately) removing materials from site and making good disturbed surfaces of floors, walls etc complete all as specified & directed
Dismantling of old unserviceable main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall complete all as specified and directed.
M&L for Point wiring for one fan point or one light point / bell point using FRLSH PVC insulated unsheathed multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.
All as per srl item No. 150 above but point wiring for one socket outet point 5 amps on the independent board.
All as per srl item No. 150 above but point wiring for one socket outet point 5 amps on the same board.
M&L for Point wiring for one 15 Amp socket outlet on independent board using FRLSH PVC insulated unsheathed multi stranded copper conductor cable 4 sqmm including 4 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wir e drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.
M & L for sub main wiring with two single core 6 Sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC coneealed conduit of suitable size with all fittings and fixing accessories on roof, walls, ceiling etc. including 1x 6 Sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH with proper colour coding connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including including taking down existing unserviceable one and removing from site complete all as specified and directed. Note:- Two run of single core cable and one run earth wire will be measured as one length.
S&F Modular blanking plate 1 module size complete all as specified and directed.
S&F Modular switch 6 Amp, 1 way, 1 module size complete complete all as specified and directed.
S&F in repairs Modular switch 16 Amp, 1 way, 1 module size complete all as specified and directed.
S&F in repairs Modular socket 6 Amp, 5/6 pin, 2 module size complete all as specified and directed.
S&F in repairs Modular socket 16 Amp 5/6 pin mulipurpose 2 module size complete all as specified and directed.
S&F modular Bell push flush type 5 Amp, complete all as specified and directed.
S & F modular stepped type electronic fan regulator flush type socket type complete all as specified and directed.
S&F switch piano flush type single Pole 5 Amp, 1 way, complete all as specified and directed.
S&F socket 2 in 1, 5/6 pin, 5 Amp complete all as specified and directed.
S&F Switch socket combination 2 in 1, 5/6 pin, 5 Amp complete all as specified and directed.
S&F switch socket combination 2 in 1, 5/6 pin, 5 Amp and 15 Amp, complete all as specified and directed.
S&F Bell push flush type 5 Amp, complete all as specified and directed.
Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.
S & F stepped type electronic fan regulator flush type socket type complete all as specified and directed.
S & F modular metal flush box alongwith white cover plate incl frame 1 module fixed in repairs complete all as specified and directed.
S & F modular metal flush box alongwith white cover plate incl frame 2 module fixed in repairs complete all as specified and directed.
S & F modular metal flush box alongwith white cover plate incl frame 3 module fixed in repairs complete all as specified and directed.
S & F modular metal flush box alongwith white cover plate incl frame 4 module fixed in repairs complete all as specified and directed.
S & F modular metal flush box alongwith white cover plate incl frame 6 module fixed in repairs complete all as specified and directed.
S & F modular metal flush box alongwith white cover plate incl frame 8 module vertical / horizontal fixed in repairs complete all as specified and directed.
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single / double pole MCB 10/ 20 amp complete all as specified and directed.
Supply and fix sheet metal enclosure powder coated DB for fixing of MCBs, TPN 4 ways double door with 200 Amp rated bus bar, 415 Volts complete all as specified and directed.
Supply and fix sheet metal enclosure powder coated DB for fixing of MCBs, SPN 8 ways double door with 200 Amp rated bus bar, 240 Volts complete all as specified and directed.
Supply and fix sheet metal enclosure powder coated DB for fixing of MCBs, SPN 4 ways double door with 200 Amp rated bus bar, 240 Volts complete all as specified and directed.
S&F MCB SP 6 to 32 Amp, C Curve type, 10kA, with over load and short circuit protection complete all as specified and directed.
S&F MCB SPN 32 Amp, C Curve type, 10kA, with over load and short circuit protection complete all as specified and directed.
MCB TPN 63 Amp, C Curve type, 10KA,415 volts with over load and short circuit protection complete all as specified and directed.
S&F LED bulb 7-10 watt suitable for batten holder and decotative bracket wall light fitting complete all as specified and directed. Make:- Bajaj/ / CROMPTON/ Philips/ Havells
M&L for decorative bracket light fittings holder type, insulated with polycarbonate body and back plate housed with porcelain base suitable for LED lamp. complete all as specified and directed.
Supply and fix LED panel light size 2 x 2 designed by using latest technology, 36 watt, IP20 rating 180-220 volt cast colour for edge-lit ilumination, recess/surface mounted aesthetically designed for soft light and glare including accessories internally prewired suitable for surface ceiling/recessed mounting type including making connections with the existing supply complete all as specfied and directed. Make : Havells Cat Part No. ENDURASLIMPROPLUS2X2PLR28/36WLED840MOD or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves
S&F LED Tube rod 20 watts 220 volt fixed in repairs complete all as specified and directed.
S&F mirror light LED linear fitting including Tube rod 10 watts and fixed on wall surface with PVC square box for self aligning and connected with 3 core flexible FRLS copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed.
Supply and fix in repair plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :- BAJAJ MAXIMA DX 5 BLADE (250 MM ) or equivalent.
S & F Bell ding dong AC 230 Volts, single pole complete all as specified and directed.
S & F lamp angular holder insulated body with back plate suitable for batten fittings complete all as specified and directed.
M&L for re-winding of ceiling fan of size 1200-1400 mm sweep after strip opening of motor with proper grade/guage of super enamelled copper wiring (approximate weight of winding wire 250 -300 gms /fan) so as to achieve original specifications i.e. current rating and RPM including all insulating materials, bushes etc re-assembling including testing for continious 2 hrs complete all as specified and directed. Note:- (a) RPM test of ceiling fan with suitable tachometer will be done in the presence of Engineer-in-Charge. (b) All T&P will be provided by the contractor with in the rates quoted for the item.
Supply and fix Havells Luminaire pluto 2x2, symmetrical illumination, aesthetically designed for soft light and glare including accessories internally pre-wired suitable for surface ceiling/Recessed mounting type including making connections with the existing supply, complete all as specified and directed. Make:- Havells Cat No. PLUTOSURFACE2X2PLS34WLED857S or equivalent to Bajaj/Philips/ Wipro/ Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves
S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make:- Crompton Greaves Cat No. CCS-100-20-65-HL2-DP-NWH or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/ Havells
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm bore GI light grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed.
M/S TAPAN KUMAR RAY
MS AFTAB LASKAR
M/S SANJIB DEB
m/s builders and suppliers
M/S M P Sharma
SURANA CORPORATION
Younus Khan
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .