REPAIR/REPLACEMENT/MAINTENANCE OF SECURITY LIGHTS, FLOOD LIGHTS, DG SETS, PANELS, STARTERS WITH OTHER CONNECTED ITEMS AND REPAIR/REWINDING OF VARIOUS CAPACITY OF FANS OF OTM and MD ACCN AT 213 TRANSIT CAMP UNDER GE NAGROTA.

Amount

Taking down security light fiting HPSV / HPMV /HPMH/Post top lantens/flood light/LED light fittings etc of any capacity from any height any situation and re-fixing/ re-hanging the same in existing location or other location (as directed) after carrying out repair works on light fittings including testing complete all as specified and directed by Engineer-in-Charge. Note :(i) The rate quoted for the above item shall be deemed to be included for neccessary charges for replacement of the all defective parts/fittings but cost of fittings viz: ballast of any type, ignitor, holder, lamp/tube/LED Lamp of any type, capacities required will be measured & paid separately under appropriate items of Sch 'A' here in after.

Supply only Heavy duty copper wound ballast(choke) for HPSV/MH street light/flood light fitting of 70 watts, complete all as specified and as directed.

Supply only Heavy duty copper wound ballast(choke) for HPSV/MH street light/flood light fitting of 150 watts, complete all as specified and as directed.

Supply only Heavy duty copper wound ballast(choke) for HPSV/MH street light/flood light fitting of 250 watts, complete all as specified and as directed.

Supply only Lamp electric srew type HPSV lamps suitable for 70 watts, complete all as specified and as directed.

Supply only Lamp electric srew type HPSV lamps suitable for 150 watts, complete all as specified and as directed.

Supply only Lamp HPSV lamps suitable for 250 watts, complete all as specified and as directed.

Supply only LED Lamp 30 Watt pin type suitable for fix in batton holder complete all specified and directed

Supply only Ignitor 220-240 volts AC suitable for 70/150/250 watts HPSV/SV street light luminaries striking distance 5 mtr, complete all as specified and as directed.

Supply only Porcelain holder suitable for 70/150/250 watts HPSVMH lamp complete all as specified and directed

Supply only Capacitor suitable for HPSV/MH light fitting upto 33 MFD complete all as specified and as directed.

S&F Lamp holder PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply & fixing LED street light fittings 90 watt aerodynamically designed with excellent thermal mangement, inbuilt tilt angle arrangement with IP66 protection complete with electrical connection arrangement as per Crompton Cat part No LSTP-90 CDL-M or equivalant

All as per ser Item No.3.00 here in above but 120 watt

Supply & Fix rectangular LED Flood light fittings 150 watt with innovative thermal mangement, and with multiple optics and equiped with IP66 protection complete with electrical connection arrangement as per Crompton Cat part No LFLN-150 CDL/60-M or equivalan

All as per ser Item No.5.00 here in above but 200 watt

Supply & Fix IP65 rated LED Post Top light fittings 40 watt with moonlight effect and efficient light distribution complete with electrical connection arrangement as per Crompton Cat part No LPTM-40-CDL or equivalent

Supply & fixing single piece moulded PVC box of size 170 x 170 x 105mm outer & 140 x 140 x 95 mm inner dimensions consisting of one MCB SPN 32 Amps & one 4 way bakelite connector all as per product code GSJB 1414 of Make Sintex or equivalant Make of National, complete with all necessary arrangement for fixing to wall/steel / RCC poles with clamp, bolts and nuts etc, including taking down old defective one, complete all as specified and directed..

Supply & fixing street light brackets fabricated out of medium grade GI pipe of 50 mm dia, 1.5mtr long bent to shape suitable for street light fittings with two sets of clamps made out of mild steel flat iron suitable for fixing on HT/LT poles with nuts, bolts and washers all as directed including dismantling the existing brackets etc complete all as directed.

Taking down service wire from street light poles & providing new 1100 V Grade PVC insulated,aluminium conductor & overall PVC sheathed in service connection with 2 single core cables of size 6 Sqmm & connecting to light fittings/tertminal boxes, complete all as specified and directed

All as per ser Item No. 10.00 here in above but 10 Sqmm

Servicing of DG Set 40 KVA to 63 KVA of any Make, checking entire system as per manufacturer's catalogue such as checking all parts for serviceeablility, taking down defective parts such as fuel filter assy, by pass filter assembly, lub oil filter assembly, air cleaner assy, flexible hose pipe, coolent etc and replacing the same with same size, make and capacity of parts, draining out the old used burnt engine oil from the sump cleaning all serviceable filters and oil sump with cleaning solution such as petrol/ diesel and refilling new engine oil upto required level and including testing to DG Set to entire satisfaction of Engr-in Charge. Note:- (i) Spare parts/ Engine oil/ check kit/ filter shall be measured and paid for saperately under respective items of BOQ (ii) Minimum 6 months gap/ 200 hrs of run whichever is earlier shall be considered for next service (iii) Repair Guarantee for replaced parts/servicing of DG Set shall be for six month/200 hrs from the date of service.

Supply only engine oil 20W/ 40, during servicing of DG set. Complete all as specified and directed

Supply only engine oil filter for DG set upto 63 KVA, Complete all as specified and directed

Supply only Diesel filter for DG set upto 63 KVA, Complete all as specified and directed

Supply only air filter for DG set upto 63 KVA, Complete all as specified and directed

Supply only fuel pipe for DG set upto 63 KVA capacity.

Supply only asbestos rope any dia wrapped over the exhaust pipe complete

Repair and overhauling of self starter 12 V/ 24 V of DG set, 40 to 63 KVA Capacity, after opening nuts and bolts complete carrying out repair/ maint work for smooth functioning, testing complete and refixed same place as directed at site. Note :- (i) (Spare parts will be measured and paid separately)

Supply only Field Coil to self starter 12V/24V of DG set40 to 63 KVA complete.

Supply only Armature winding to self starter 12V/24V of DG set 40 to 63 KVA complete.

Supply only Clutch assembly to self starter 12V/24V of DG set 40 to 63 KVA complete

Supply only Carbon Brushes to self starter 12V/24V of DG set 40 to 63 KVA complete

Supply only Pinion Assembly to self starter 12V/24V of DG set 40 to 63 KVA complete

Repair and overhauling of dynamo of any DG set, 40 to 63 KVA capacity after opening nuts and bolts complete carrying out repair/ maint work for smooth functioning, testing complete and refixed same place as directed at site. Note :- (i) (Spare parts/copper winding will be measured and paid separately).

Supply only Carbon Brushes to Dynmo of DG set 40 to 63 KVA complete

Supply only copper winding for Armature of Dynmo of DG set 40 to 63 KVA complete

Supply only Field Coil to Dynmo of DG set 40 to 63 KVA complete

Repair/maintenance of DG set Manual/AMF LT Panel by cleaning of all carbonized / corroded parts, checking of wiring and battery charging system if any in the panel replacement of lugs, single core copper cable 2.5 /4 Sqmm etc as required and making the panel serviceable of any size / any make including replacement of voltmeter, ammeter, power factor meter, indicator frequency meter etc all as directed by Engineer-in-Charge Note :- (i) (Spare parts like Voltmeter, Ammeter,Power Factor meter, Indicator lamp, Frequency Meter and MCB/MCCB will be measured and paid separately). (ii) Cost of Lugs, tightening of nuts, bolts replacement of wiring and other minor work etc are included in the unit rate quoted by the contractor.

Supply only Voltmeter, range 0 to 500 V into LT Panel of DG set 40 to 63 KVA complete

Supply only Ammeter, as per existing type or model into LT Panel of DG set 40 to 63 KVA complete

Supply only Frequency meter, as per existing type or model into LT Panel of DG set 40 to 63 KVA complete

Supply only Power Factor meter, as per existing type or model into LT Panel of DG set 40 to 63 KVA complete

Supply only Indicator Lamp RYB, as per existing type or model into LT Panel of DG set 40 to 63 KVA complete

Supply only MCB SPN 6-32 Amps 10 KA 230 volts "C" series complete.

Supply only MCCB TP 63 Amps ,16 KA, 415 volts complete in LT Panel of DG set upto 63 KVA complete

Supply only MCCB TP 100 Amps ,16 KA, 415 volts complete in LT Panel of DG set upto 63 KVA complete

Supply and fixing of battery terminal bolt type suitable for 180 AH battery as directed by Engineer-in-Charge.

Supply and fixing battery lead of copper conductor 25 Sqmm single core fitted with lead terminal on one side and other side with brass or lead terminal ( length of wire not less than1.5 Mtrs) as per site required and connection as directed by Engineer-in-Charge

Supply and fix in replcement of battery 12 Volts.150 AH including filling of required capacity electrolyte and transportation complete all as directed by Engineer-in-Charge.

Supply and fix in replcement of battery 12 Volts.180 AH including filling of required capacity electrolyte and transportation complete all as directed by Engineer-in-Charge.

Supply and fill electrolyte distiled water to battery complete all as directed by Engineer-in-Charge.

Taking out injection nozzle from DG set transportation to authorised service centre for repairing and replacement of necessary parts calibration and re-fixing to DG set and testing complete all as directed by Engineer-in-Charge.

Material and Labour for servicing and overhauling and repairing complete alternator greasing cleaning of all stator and rotor, re-varnishing the stator and rotor winding with superior quality of varnish including heating and baking the same. Re-assembling the complete alternator, fixing in position and testing on load for the DG Set upto 63 KVA capacity Note :-(i) Cost of greasing, varnish, tightening of nuts, bolts replacement of wiring and other minor work etc are included in the unit rate quoted by the contractor.

Supply and fix in replacement of MCCB 4 pole 160 Amps 50 Hz , 415 volts adjustable type with reputing cap 25 KA, complete all as specified and directed

Supply and fix in replacement of MCCB 4 pole 250 Amps 50 Hz , 415 volts adjustable type with reputing cap 36 KA, complete all as specified and directed

S&F change over switch modular construction on load 415 Volts TPN in sheet metal enclosure 4 pole of capacity 200 amps complete all as specified and directed

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, surrounded from all sides alternate packed layer of char coal dust and common salt and elctrode connected with galvanised iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I including necessary earth work in type strata, foundation of pit and wall using PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate 40 mm thick pit cover slab using RCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate with 6 mm dia MS bar @ 100 mm C/C both ways GI medium grade 20 mm dia pipe for watering including funnel wih wire mesh and 15 mm bore GI light grade pipe for earth lead wire protection upto 7.5 mtr , complete all as specified and directed.

All as per ser Item No 27 here in above but using 32 x6m GI earth strip as a earth lead & 40 mm dia light grade GI protection pipe complete all as specified and directed Note: (i) GI wire/strip or protection pipe 15mm/40mm dia upto 7.5RM included the quoted rate. (ii) The qty above the 7.5 RM shalll be measured & paid separetly.

Disconnecting & Taking down unserviceable ceiling fan 1400/1200 mm sweep 230 v, AC supply, single phase from position for winding and refixing for the same after winding, necessary connection comple all as specified and directed . Note winding and including repairs measured separately.

All as per Item No 29.00 here-in-before but exhaust fan of size 450/380/300 /255mm sweep

All as per item No 29.00 here-in-before but wall mounted fan size 450/400 mm sweep

M&L for collecting unserviceable ceiling fans 1200mm sweep 230 v, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the ceiling fan and taking out complete burnt winding from fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling , greesing & painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface of the fan with and including replacement of rusted /unserviceable nuts, bolts split pin rubber reel , machine screws, shaft etc including replacement of defective / unserviceable parts / spares as required reassembling the fan and testing complete deposinging the complete repaired fan to E/M store yard of GE Nagrota including transportation complete all as specified and derected.

All as per item No 32.00 here-in-before but ceiling fan of size 1400 mm sweep

M&L for collecting unserviceable exhaust fan 450 mm sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the exhaust fan and taking out complete burnt winding from exhaust fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface replacement of rubber pads and depositing the exhaust fan to E/M store yard GE Nagrota including transportation and testing etc complete all as specified and derected.

All as per item No 34.00 here-in-before but exhaust fan of size 300 mm sweep

M&L for collecting unserviceable wall mounted fan 450/400mm, sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the wall mounted fan and taking out complete burnt winding from wall mounted fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface replacement of rubber pads and depositing the wall mounted fan to E/M store yard GE Nagrota including transportation and testing etc complete all as specified and derected.

Taking down carefully from position , ceiling fan 230 volts single phase 50 Hz 1400 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. Note ; necessary accessaries paid seperately here in after.

All as per item No 37.00 here-in-before but ceiling fan of size 1200 mm sweep

Taking down carefully exhaust fan 230 volts single phase 50 Hz 450 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. Note ; necessary accessaries paid seperately here in after

All as per item No 39.00 here-in-before but exhaust fan of size 300/380 mm sweep

Taking down carefully wall mounted fan 230 volts single phase 50 Hz 450 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. Note ; necessary accessaries paid seperately here in after.

Supply and replacement of gun metal bush of required size suitable for ceiling fans and exhaut fans complete all as specified and directed

Supply and replacement of hanger for ceiling fan 1200mm/ 1400 mm sweep with nuts, bolts, washers complete all as specified and directed.

Supply and replacement of aluminium blades for ceiling fan 1200 mm sweep complete all as specified and directed

Supply and replacement of aluminium blades for ceiling fan 1400 mm sweep complete all as specified and directed

Supply and replacement of bearing suitable for ceiling fan of any size complete all as specified and directed

Supply in replacement of bearing suitable for Exhaust fan/Air circulator/wall mounted fan of any size complete all as specified and directed

M&L scrbbing and preparing the old painted surfaces of ceiling fan of size 1200/1400mm sweep (Make :- Kessels /Usha / Orient / Crompton / Cool home / Bajaj/ Polar ) Complete including blade painting the same with white duco paint and writing the MES Nos of the fans, 25mm with black synthetic enamel paint and including oiling greasing of any make complete all as specefied and directed.

M&L scrubbing and preparing the old painted surfaces of exhaust fan/ wall mounted fan of size 300/450mm sweep (Make :- Kessels /Usha / Orient / Crompton / Cool home / Bajaj/ Polar ) Complete including blade painting the same with white duco paint and writing the MES Nos of the fans, 25mm with black synthetic enamel paint and including oiling greasing of any make complete all as specefied and directed.

Supply & Fix canopy top and bottom for ceiling fans complete all a spcified and directed.

S & F in repairs flexible twin core 23/0.0076 with copper conductor including connecting fan of any make complete all as specified and directed.

S&F GI pipe medium grade 15 mm dia for fabrication of ceiling fan down rod with fixing arrangement of fan and clamp heavy duty as required in replacemnt complete all as specified and directed. Note : length of down rod measured as per sited requirement upto 3 mtr down.

S&F exhaust fan frame made out of MS sheet of any make and size of exhaust fan with suitable size of nut bolt and washers complete all as specified and directed

Material and labour for replacement of Louvers with new louvers of exhaust fan 450mm sweep complete all as specified and directed.

Material and labour for replacement of Louvers with new louvers of exhaust fan 300/380 mm sweep complete all as specified and directed.

S&F in repairs condenser of 2.5 MFD capacity after removing existing unserviceable condenser from any situation complete all as specified and directed,

All as per item No 56.00 here-in-before but condenser 4 MFD capacity

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.

Supply & fix blade suitable for wall mounted fan 400/450 mm sweep fan complete all as specified and directed

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs.84513.00 during AOC Note:- Tenderers shall not quote for this Schedule

Kalsi Engineers and contractors

Balbir Enterprises

R K BUILDERS

Allied Technologies