REPAIR REPLACEMENT OF INTERNAL WIRING AND CONNECTED ELECTRICAL FITTING AND FIXTURE ALONG WITH MAINTENANCE OF ALLIED MISC EM WKS IN ZONE A AREA AND REPAIR REPLACEMENT AND MAINTANCE OF CEILING FAN EXHAUST FAN WALL MOUNTING FAN AND GEYSERS OF OTM

Amount

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sqmm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI marked in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc complete all as specified & directed.

For one light /fan point controlled by one, one way switch.

For one 3 pin socket outlet 5 Amps point on same board and controlled by one, one way switch.

For one 3 pin socket outlet 5 Amps on independent board and controlled by one, one way switch.

For one light point controlled by two, two way switches.

For one bell point controlled by one, one way bell switch.

Ditto all as per serial Item No. 2 described here-in-before but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sqmm (Nominal area) ISI Marked for power socket point on independent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete.

Ditto all as per serial Item No. 2 described here-in-before but using single runs of PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 4 Sq.mm (Nominal area) ISI Marked for high power wiring system with fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as continuous earth wire complete.

Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5/6 Amps complete all as specified and directed.

Supply and fix socket (ISI marked), two in one 3/5 pin and 5/6 Amps, flush type, 240 volts complete all as specified and as directed.

Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 15/16 Amps complete all as specified and directed.

Supply and fix socket (ISI marked), two in one 5/6 pin and 15/16 Amps, flush type, 240 volts complete all as specified and as directed.

Supply and fix Bell push, flush type, 5/6 Amps, single pole, 230 V (ISI mark) completed all as specified and directed.

S&F stepped type electronic fan regulator flush type with having hum free step alongwith speed control knob suitable for single phase complete all as specified and directed.

S&F Modular switch one way 6 Amps, one module complete all as specified and directed.

S&F modular socket 6 Amps-2/3 pin combined two modules complete all as specified and directed.

S&F Modular switch one way 16 Amps, one module complete all as specified and directed.

S&F Modular socket 6A & 16A 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular bell push 6A one module complete all as specified and directed.

S&F Buzzer, ding dong, AC, 230 V, Single pole (ISI marked) completed all as specified and directed.

S&F Modular fan regulator electronic rotary, 0-4 steps stepped type 100 watt 240 volts 50Hz hum free 2 module with modular plate and frame complete all as directed.

S&F ceiling rose, 3 terminals PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F in repair/ replacement angular/ batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb Including providing of rechargeable LED bulb of capacity 7/9 watt warm/ white colour type complete all as specified and directed.

S&F in repair/ replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair/ replacement recessed / ceiling concealed mounted flat slim panel square shape with LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/ 36Watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete used for roof ceiling and required fitting use in both warm/white type colour complete set providing of suitable type of flat flexible two/three core cable and making electric connection complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete all as specified and directed.

S&F in repair/ replacement recessed /ceiling concealed mounted flat type rectangular size decorative ceiling LED luminaire tube light panel fitting of rating capacity in 33W/ 36Watt of size/ type 1' x 4' (width x length) with electronic driver complete light fitting set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed.

S&F in repair/ replacement recessed / ceiling concealed mounted flat square slim panel integrated design LED luminaire light panel type light fitting of size/ type 1' x 1' of rating capacity in 18 W to 24W decorative type with high performance LEDs and electronic driver and mounting slot with long life energy saving complete use in both warm/ white type colour set complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flat flexible two/ three core cable and making electric connection complete all as specified and directed.

S&F in repair/ replacement recessed/ceiling concealed mounted down lighter light fitting of round/ Square flat shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 15Watt to 18Watt 220 volt AC complete light fitting set including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flat flexible two/three core cable and making electric connection all as specified and directed.

S&F in repair/ replacement recessed/ ceiling concealed mounted down lighter light fitting of round/ Square flat shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 9Watt to 12Watt 220 volt AC complete light fitting set including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting and also providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed.

S&F in repair/ replacement recessed/ceiling concealed mounted down lighter light fitting of round/ Square flat shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 5Watt to 7Watt 220 volt AC complete light fitting set including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flat flexible two/three core cable and making electric connection all as specified and directed.

S&F in repair/ replacement ceiling slim surface mounted down lighter light fitting of round/ Square shapes type decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 15Watt to 18Watt 220 volt AC complete light fitting set and including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed.

S&F in repair/ replacement ceiling slim surface mounted down lighter light fitting of round/ Square shapes type decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 9Watt to 12Watt 220 volt AC complete light fitting set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flat flexible two/ three core cable and making electric connection complete all as specified and directed.

S&F in repair/ replacement LED mirror light fitting with high out put diffuser 2' long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type complete light fitting set and including providing of suitable type flat flexible cable for electric connection from ceiling rose to fitting and making electric connection complete all as specified and directed.

S&F in repair/ replacement surface wall mounted decorative wall bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1 x 9W LED lamp complete light fitting set use in both warm/white type colour complete light fitting set and complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed.

S&F in repair/ replacement surface mounted LED decorative type angle adjustable sport light / bed side study lamp light fitting with lamp in matt finish for premium aesthetics with based of suitable rating capacity 7Watt LED complete light fitting set and required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed.

S&F in repair/ replacement LED street light fitting of rated capacity 20W/ 25Watt 230 volt AC with having LED driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attachment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS clamp alongwith nut bolt and including providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed.

S&F in repair/ replacement surface mounted LED bulk head luminaries light fitting of rated capacity 10W including LED lamp & driver suitable used for out door type with dust and water proof with energy efficient complete and including dully fixed on bldg wall surface including providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed.

S&F in repair/ replacement sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection complete all as specified and directed.

S&F in repair/ replacement sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base channels and blanking plates suitable for holding of main MCCB as incomer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP160 Amps with breaking rapturing capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter complete all as specified and directed.

S&F in repair/ replacement sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type of distribution board of rating SPN 16 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and outgoing system complete set and fixed on surface of wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter complete all as specified and directed.

Ditto all as per serial item No. 36.00 described here-in-before but distribution board type & size of rating capacity SPN 12 way system.

Ditto all as per serial item No. 36.00 described here-in-before but distribution board type & size of rating capacity SPN 8 way system.

Ditto all as per serial item No. 36.00 described here-in-before but distribution board type & size of rating capacity SPN 4/6 way system.

S&F in repair/ replacement MCCB TPN 125 Amps with breaking capacity 16 KA 3 phase 415 volt AC supply system and having adjustable setting type and also making suitable size / type of electric wiring connection complete all as specified and directed.

S&F in repair/ replacement MCCB TPN 160 Amps with breaking capacity 36 KA 3 phase 415 volt AC supply system and having adjustable setting type and also making suitable size / type of electric wiring connection complete all as specified and directed.

S&F in repair/ replacement MCB TPN 63 to 100 Amps with breaking capacity 10KA 'C' Curve series, 415 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete all as specified and directed.

S&F in repair/ replacement MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete all as specified and directed.

S&F in repair/ replacement MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete all as specified and directed.

S&F in repair / replacement MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete all as specified and directed.

S&F in repair / replacement sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire single core of size 2 runs of 10 Sqmm and 1 run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed in wall or surface on wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed. Note: 3 runs of cable and one run of conduit/ casing capping shall be measured and paid as one unit.

Ditto all as per serial item No. 46.00 described here-in-before but 6Sqmm cable.

Ditto all as per serial item No. 46.00 described here-in-before but 4Sqmm cable.

M&L for earthing work complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/ main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR Part -I and also making arrangement of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh and also including provision of concrete pit cover framing work in PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed.

S&F in repair rigid non metallic PVC conduit/ casing capping of size 15/ 20 mm bore heavy duty with all fitting laid in trenches/ wall including providing clamping arrangement for holding of pipe on wall in proper size of clamps, nut bolt and washer etc complete all as specified and directed.

S&F in replacement of flexible type round PVC bedded with PVC insulated and sheathed with multi stranded FRLS cable of 1100 volt grade with multistranded copper conductor wire of size 1.5 Sqmm 3 core type (Nominal area) ISI Marked complete all as specified and as directed.

S&F in replacement of LED electronic Driver suitable for 36 to 48 watts LED light fitting/ fixture of any type any make or as per existing make and sample complete for rate voltage upto 220 volts and making electric wiring connection including complete all as specified and directed.

S&F in replacement of LED electronic Driver suitable for 9 to 18 watts LED light fitting/ fixture of any type any make or as per existing make and sample complete for rate voltage upto 220 volts and making electric wiring connection including complete all as specified and directed.

S&F in replacement of geyser heating element of rating capacity 1.5KW to 2.0 KW alongwith 'o' ring washer made out of copper / brass alloy complete set all as per existing type of sample / shape like a round, triangular, square, porcelain type, round with threaded type etc and properly match to the each other as per the existing model & make of item and suitable using for geyser of storage capacity 25 Ltrs to 50 ltrs system complete all as specified & directed.

S&F in replacement of geyser inner cold/hot water circulating apparatus syphon unit assembly (Geysers assembly) all as per existing type of sample/size and properly match to the each other as per the existing type model & make of item complete set including duly fixed it inside of existing geyser system and suitable used for geyser capacity 25 Ltrs to 50 Ltrs including also replacement of defected rubber jain washer 'o' ring type with nuts and bolts & split gas pin system including removing all electric and water connection along with taking down of geyser from existing site position and refixing the same after repair/ replacement of worn out item complete all as specified and as directed.

S&F in replacement of Gum metal vertical type non return valve of size 15 mm dia bore type all as per existing type of sample & size/shape and suitable using for geyser of storage capacity 25 ltrs to 50 ltrs systems complete all as specified & directed.

S&F in replacement of geyser storage hot water inner tank suitable for geyser of capacity 25 litre and made out of heavy duty stainless steel sheet metal body system or all as per existing type of sample & shape /size and properly match to the each other as per the existing type model & make of item complete set including duly fixed it inside of existing geyser system and suitable used for geyser capacity 25 ltrs and including replacement of defected rubber jain washer 'o' ring type with nuts and bolts and removing all electric and water connection along with taking down of geyser from existing site position and refixing the same after repair/ replacement of worn out item complete all as specified and as directed.

Ditto all as per serial item No. 57.00 described here-in-before but storage hot water inner tank of suitable for geyser of capacity 50 litre complete.

S&F in replacement of geyser thermostat large type with having temp adjustable setting made out of copper / brass alloy metal all as per existing type of sample /size and properly match to the each other as per the existing type model & make of item complete and suitable uses for geysers of capacity 25 ltrs to 50 ltrs system complete all as specified & directed.

S&F in replacement of single or double square type of geyser auto cut thermostat unit assembly complete all as per existing type of sample / Shape /size and properly match to the each other as per the existing type model & make of item complete set and suitable uses for geysers of capacity 25 ltr to 50 ltrs system complete all as specified and as directed.

S&F in replacement of air release safety valve all as per existing type of sample /size and properly match to the each other as per the existing type model & make of item complete and suitable uses for geyser of capacity 25 ltr to 50 litres system complete all as specified and as directed.

S&F in replacement of the insulating material i.e. glass wool materials for filling inside area in between of geyser outer body and hot water tank system suitable for geyser capacity 25 ltr to 50 litre system including dismantling / taking out of geyser from existing site position and refixing the same after repair/ replacement of worn out item complete all as specified and as directed.

S&F in replacement of heavy duty PVC braided PVC connection pipe of size 15 mm dia and 450 mm long alongwith two Nos of brass nut and nylon washer complete all as specified and as directed.

S&F in replacement of heavy duty steel wire braided chromium plated stainless steel metal body connection pipe of size 15 mm dia and 450 mm long alongwith two Nos of brass nut and nylon washer complete all as specified and as directed.

S&F in replacement of flexible type round PVC bedded with PVC insulated and sheathed with multi stranded FRLS cable of 1100 volt grade with multistranded copper conductor wire of size 2.5 Sqmm 3 core type (Nominal area) ISI Marked complete all as specified and as directed.

S&F in replacement of geyser body outer cover top plate made of MS sheet all as per existing size model / sample suitable uses for 25 to 50 ltrs capacity geysers system complete including dismantling / taking out of geyser from existing site position and refixing the same after repair/ replacement of worn out item complete all as specified and as directed.

S&F in replacement of geyser body inspection bottom cover plate made of MS sheet all as per existing size model / sample suitable uses for 25 to 50 ltrs capacity geysers system complete including dismantling / taking out of geyser from existing site position and refixing the same after repair/ replacement of worn out item complete all as specified and as directed.

S&F in replacement of heavy duty large type size of MS wall fasteners (geyser bolt) of suitable of size 10 mm dia not exceeding up to 100 mm long along with nut, bolt etc including drilling, grouting it on wall for hanging of geyser and making to good the disturbed surfaces complete including dismantling / taking out of geyser from existing site position and refixing the same complete all as specified and as directed.

S&F in replacement of round & square shape indicating lamp Red /Green or as per existing sizes sample / type model suitable display for geyser on off indicating system complete all as specified and as directed.

S&F in replacement of geyser outer body cover frame complete set all as per existing shape size /type / sample and made out of or fabricated on MS sheet/PVC body and duly fixed outside of geyser system of geyser capacity 25 Litres system and including including dismantling / taking out of geyser from existing site position and refixing the same complete all as specified and as directed.

Ditto all as per serial item No. 70.00 described here-in-before but capacity 50 Litre complete

S&F in replacement for single core copper wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sqmm (Nominal area) complete all as specified as directed.

Ditto all as per serial item No. 72.00 described here-in-before but 2.5 Sqmm wire

Ditto all as per serial item No. 72.00 described here-in-before but 4 Sqmm wire

Ditto all as per serial item No. 72.00 described here-in-before but 6 Sqmm wire

S&F in repair / replacement MCB SP 16 to 20 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete all as specified and directed.

S&F in repair/ replacement MCB SPN 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete all as specified and directed.

S&F in replacement of PVC insulated body three pin plug top of rating capacity 15/16 Amp and making electrical connection complete all as directed.

S&F in replacement of outlet flush type multipurpose 5/6 pin type switch socket combination of rating capacity 5/6 Amp and duly fixed with upon the PVC gang box system complete all as specified and directed.

S&F in replacement of outlet flush type multipurpose 5/6 pin type switch socket combination of rating capacity 15/16 Amp and duly fixed with upon the PVC gang box system complete all as specified and directed.

S&F in replacement of multipurpose 5/6 pin type modular switch socket combination with base and face frame cover plate of rating capacity 6/10 Amp and duly fixed with upon the modular type PVC gang box system complete all as specified and directed.

S&F in replacement of multipurpose 5/6 pin type modular switch socket combination with base and face frame cover plate of rating capacity 15/20 Amp and duly fixed with upon the modular type PVC gang box system complete all as specified and directed.

S&F in repair rigid non metallic PVC conduit pipe of size 15/20 mm bore with all fitting including providing clamping arrangement attachment for holding of pipe on wall in proper size of clamps, nut bolt and washer etc complete all as specified and directed.

S&F in repair rigid non metallic PVC Casing capping strip of size 20/25 mm x16 mm with all fitting including providing clamping arrangement for holding on wall complete all as specified and directed.

S&F in replacement of MS metal clad top plug with having two to three pin adaptor for phase & earth system suitable for rating capacity 15 Amp to 20 Amp 220 volt AC complete all as specified and directed.

M&L for disconnection of electric wire and water PVC pipe connections and taking down/out of geyser from existing site position for repairing purposed and dismantling/ taking out of inner storage hot water tank, geyser assembly, heating element, glass wool etc from in side the geyser of capacity 25 to 50 litre and including remove and cleanig of blockage / depositing the scale, silt, sludge, dirty particals material from the in side of the storage heating tank or assembly area of system throught method of descaling with the help of chemical acid or manually mechanically system and after washing in side of the storage heating tank or geyser assembly, heating element, thermostat system including tighting, adjustment, servicing and also rectification the leakage problem of hot tank throught hot & cold welding / brazing (gas or electric welding) work system for steel tank / copper tank complete and after repair reassembly and proper filling the glass wool and replacement of defected items in side around the tank and fixing of geyser on same position and testing on load complete all as specified and as directed.

S&F in replacement of geyser heating element of rating capacity 3/4 KW alongwith 'o' ring washer made out of copper / brass alloy complete set all as per existing type of sample / shape like a round, triangular, square, porcelain type, round with threaded type etc and properly match to the each other as per the existing model & make of item complete all as specified and directed.

S&F in replacement of brass/copper thimble with connected wire lead complete set all as per existing size sample/ model suitable for geyser connection purposed complete all as specified and directed.

S&F in replacement of twin core flat/ circular cable of size 10 sqmm 1100 Volts grade, heavy duty cable PVC insulated multistranded aluminium conductor cable served with inner sheathed of PVC tap and overall PVC sheathed and making electric connection complete all as specified and directed.

Ditto all as per serial item No. 89.00 described here-in-before but 6 Sqmm cable

Ditto all as per serial item No. 89.00 described here-in-before but 4 Sqmm cable

S&F in repair stepped type electronic fan regulator flush type with having hum free step alongwith speed control knob suitable for single phase complete all as specified and directed.

M&L for taking down of old unserviceable air circulation ventilation fan fan of size 150/ 200 MM sweep single phase 220 Volt AC and replacement with by all new one of body and it all connected fixing accessories of system like outer body frame cover including back and face cover with holding support channel made out of high quality PVC body framing work alongwith louvers and shutter, fan motor assembly with shaft and blade and it all connected fixing accessories of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection complete all as specified and directed

M&L for taking down of old unserviceable electric water storage heating system of capacity 25 ltrs and replacement with by all new one of body parts and it all connected fixing accessories of system like out of PVC /mild steel outer body with back and top plate framing work alongwith hot water inner tank and glass wool insulation materials with geyser heating assembly with base support MS plate washer and nut bolt & heating elements up to 2KW lamp, controller setting knob, flexible cable with top etc of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection complete all as specified and directed

M&L for taking down of old unserviceable ceiling fan of size 1200 mm sweep single phase 220 Volt AC and replacement with by all new one of body frame parts and it all connected fixing accessories of system like fan motor with shaft & rotar assembly ball bearing, in side 'O' MS ring, outer body base and top cover frame, alongwith blade set, down road with clamp, canopy, capacitor etc and after replacement of new body parts refixing/ hanging the on same place of ceiling with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection complete all as specified and directed.

M&L for taking down of old unserviceable air circulation ventilation fan fan of size 250/300 MM sweep single phase 220 Volt AC and replacement with by all new one of body and it all connected fixing accessories of system like outer body frame cover including back and face cover with holding support channel made out of high quality PVC body framing work alongwith louvers, and shutter, fan motor assembly with shaft and blade and it all connected fixing accessories of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection complete all as specified and directed.

M&L for taking down of old unserviceable electric water storage heating system of capacity 50 ltrs and replacement with by all new one of body parts and it all connected fixing accessories of system like out of PVC /mild steel outer body with back and top plate framing work alongwith hot water inner tank and glass wool insulation materials with geyser heating assembly with base support MS plate washer and nut bolt & heating elements up to 2KW lamp, controller setting knob, flexible cable with top etc of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection complete all as specified and directed

S&F in replacement of electrical based call bell board indication display unit complete suitable used for 12 Nos way of rooms calling bell display indicating system with having 12 Nos of electric call bell with LED indication lamp and push release button alongwith electrical wiring cable connector system and it connecting fixing accessories complete for rating 220 volt AC operated ISI marked and to support system to urgent call help requirement at room/site complete and also making electric connection complete all as specified and directed.

S&F in replacement of modular type switch of 6/10 Amps 220 Volts AC, one module type complete all as specified and directed.

S&F in replacement of modular type socket of 6/10 Amps 220 Volts AC, 3/5 multi pin type with two modular type complete all as specified and directed.

S&F in replacement of modular type switch of 15/20 Amps 220 Volts AC one module type complete all as specified and directed.

S&F in replacement of modular type socket of 15/20 Amps 220 Volts AC 5/6 multi pin type with two modular type complete all as specified and directed.

S&F in replacement of modular type bell push button switch 5/6 Amps 220 Volts AC, one module type complete all as specified and directed.

S&F in replacement of bell Ding Dong Type, 220 volt AC, Single Pole complete all as specified and directed.

S&F in replacement for single core copper wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 10 Sqmm (Nominal area) complete all as specified as directed.

S&F in replacement modular fan regulator electronic rotary, 0-4 steps stepped type 100 watt 240 volts 50Hz hum free 2 module with modular plate and frame complete all as directed.

M&L for taking down of old unserviceable wall mounting fan of size 400 mm sweep single phase 220 Volt AC and replacement with by all new one of body parts like and it all connected fixing accessories of system like fan motor with rotation rotar assembly and cover, PVC stand bracket base frame, alongwith pull cord oscillating and speed knob system, single piece blade, outer mild steel guard frame system with wall bracket attachment with fixing arrangement accessories etc complete set etc and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc including providing of suitable type flat flexible cable and making electric connection complete all as specified and directed.

S&F in replacement of rechargeable LED bulb of rated capacity 7 to 9 watt of shape pin or threaded type required in colour white / worm type complete all as specified and directed.

S&F in replacement of LED bulb of rated capacity 7 to 9 watt of shape pin or threaded type required in colour white / worm type complete all as specified and directed.

M&L for dismantling and taking out old ceiling fan of size 1200/1400 mm sweep fan burnt out motor any type any sweep and including cutting, cleaning of slots winding of fan motor after re-winding the same fan motor assembly with replacing by new super enamelled copper winding wire as per existing wire turn ratio and all as per existing wire gauge/size and also providing of sleeve work, with E class insulation varnish, threading and also replacing of all PVC/MS defected minor parts of fan system complete and making electric wiring connection complete including taking down & refixing of old fan complete all as specified and directed.

Ditto all as per serial item No. 110.00 described here-in-before but exhaust fans motor of size100 mm to 200 mm sweep.

Ditto all as per serial item No. 110.00 described here-in-before but exhaust fans motor of size 250 mm to 300 mm sweep.

Ditto all as per serial item No. 110.00 described here-in-before but exhaust fans motor of size 400 mm to 600 mm sweep.

Ditto all as per serial item No. 110.00 described here-in-before but wall mounted fan motor of size 300 mm to 400 mm sweep.

S&F in replacement of ball bearing suitable for ceiling/ exhaust fans/ wall mounting fan of all as per existing type of sample & size/shape and properly match to the each other as per the existing type of bearing model & make of item complete and suitable using for any type fan systems complete all as specified & directed.

S&F in replacement of single phase capacitor AC 220 volts 50Hz of rated capacity 3.5 to 4 MFD ISI marked and making electric wiring connection complete all as specified and directed.

S&F in replacement of single phase capacitor AC 220 volts 50Hz of rated capacity 1.5 to 2.5 MFD ISI marked and making electric wiring connection complete all as specified and directed.

S&F in replacement of PVC insulated twin core twisted copper flexible cable of size 23/0.0076 and making connection complete all as specified & directed.

S&F in replacement of MS ‘U’ clamps with rubber reel, nuts bolts and washers complete with split pins suitable for ceiling fans complete all as specified and directed.

S&F in replacement of upper/lower canopy as per sample for 1200mm/1400mm sweep fans suitable for ceiling fans complete all as specified and directed.

S&F in replacement of metallic type fan blade including nut, bolt and screw complete suitable for ceiling fan 1200/1400 mm sweep all as specified and directed.

S&F in replacement of metallic type fan blade including nut, bolt and screw complete suitable for exhaust fan of size 300 to 600 mm sweep all as specified and directed.

S&F in replacement of PVC type fan blade including nut, bolt and screw complete suitable for exhaust fan of size 100 to 300 mm sweep all as specified and directed.

kailu construction co (BID ID -3104784)

M/S SK ATLANTIC ENTERPRISES (BID ID -3104162)