Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAdmitted-Finance | ₹40.5 L | L1 | Admitted-Finance |
| 2 | L2₹41.4 L+₹94,515.17 (2.33%)Admitted-Finance | ₹41.4 L+₹94,515.17 (2.33%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | UNIVERSAL ELECTRICALS L1 | Arun Electricals L2 |
|---|---|---|---|---|---|
| 1.00Electrification work | |||||
| 1.01 | Supply of IP 65 Protected Decorative Led Post Top suspended lantern range made up of spun aluminum canopy with die cast aluminum spigot. Fitted with glare free optically designed prismatic diffuser protected LED decorative Post Top lantern with Low glare optical design & Acrylic diffuser 90W 220-240V, 50Hz (Integrated driver) driver shall be high efficiency having efficiency > 85% and in compliance ti IEC standard (Integral with ligit fixture) system life of 25000 burning hours 70% of initial lumens maintained. system efficency should greather than or equal 75Lm/W Power Factorv > 0.95 and CRI 70 decorative LED Top 120Watt (ww/w) | 48 | nos | 14,420 ₹6,92,160 Lowest | 18,650 ₹8,95,200 |
| 1.02 | SITC of Decorative cast iron pole with single arm/double on existing cement concrete foundation, of 8 meter hight in three section with casting base should be of 1000 mm hight minimum with casting design approved by engineering incharge/procuring entity and total weight of casting (base & other casting part used) must be of minimum 50% of total weight of pole (other than inner pipe)(this should be ensured during fabrication of ordered pole by doing factory inspection of engineering incharge) and base plate of 450mmx450mmx16 mm(minimum) and thickness of MS pipe/MS gorveed pipe used must be minimum 3.25-4 mm and. The pole shall be made of Cast Iron as per IS 210:1993, precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied.Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole. The pole shall have a weatherproof flush door and locking arrangements, Provision for inside termination box with 4way connector & 1nos 6 AMPS MCB for local isolation with cover and including4 nos of foundation bolt M24x750 steel grade of E250 to IS 2062:2011 .(payment of pole will be based on pole weight so all pole must be weighted(without light and foundation bolt) (Here 55 pole of each 180 kg consider for estimation)(design of pole will be as per approved by engineering incharge) | 8,160 | kg | 302 ₹24,64,320 | 298 ₹24,31,680 Lowest |
Tender Value
₹49.9 L
EMD Value
₹99,840
Closing Date
12 May 2026, 10:00 amClosed
E.O
Municipal Board Sumerpur
Electrification work
2026_DLB_554578_1
775-777 DATE 27-04-2026
Open Tender
Electrical Works
Percentage
90 days
sumerpur
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,000
MD RISL
₹99,840
Yes
15 May 2026
28 Apr 2026
12 May 2026
28 Apr 2026
12 May 2026
28 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Electrification work | |||||
| 1.01 | Supply of IP 65 Protected Decorative Led Post Top suspended lantern range made up of spun aluminum canopy with die cast aluminum spigot. Fitted with glare free optically designed prismatic diffuser protected LED decorative Post Top lantern with Low glare optical design & Acrylic diffuser 90W 220-240V, 50Hz (Integrated driver) driver shall be high efficiency having efficiency > 85% and in compliance ti IEC standard (Integral with ligit fixture) system life of 25000 burning hours 70% of initial lumens maintained. system efficency should greather than or equal 75Lm/W Power Factorv > 0.95 and CRI 70 decorative LED Top 120Watt (ww/w) | - | nos | 24,000 | - |
| 1.02 | SITC of Decorative cast iron pole with single arm/double on existing cement concrete foundation, of 8 meter hight in three section with casting base should be of 1000 mm hight minimum with casting design approved by engineering incharge/procuring entity and total weight of casting (base & other casting part used) must be of minimum 50% of total weight of pole (other than inner pipe)(this should be ensured during fabrication of ordered pole by doing factory inspection of engineering incharge) and base plate of 450mmx450mmx16 mm(minimum) and thickness of MS pipe/MS gorveed pipe used must be minimum 3.25-4 mm and. The pole shall be made of Cast Iron as per IS 210:1993, precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied.Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole. The pole shall have a weatherproof flush door and locking arrangements, Provision for inside termination box with 4way connector & 1nos 6 AMPS MCB for local isolation with cover and including4 nos of foundation bolt M24x750 steel grade of E250 to IS 2062:2011 .(payment of pole will be based on pole weight so all pole must be weighted(without light and foundation bolt) (Here 55 pole of each 180 kg consider for estimation)(design of pole will be as per approved by engineering incharge) | - | kg | 350 | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
Tendernotice_2.pdf
PDF • 2.22 MB
BOQ_987771.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .