PROVIDING AND INSTALLING NEW MACHINERY PROVIDING FIXING LAYING JOINTING FIXING PVC PIPE ETC AT PANGOLI BLOCK SUJANPUR DISTT PATHANKOT UNDER KANDI AREA DEVELOPMENT SCHEME PM 21

Amount

PUMPING MACHINERY Providing & Installing Testing & Commissioning of one No. Electrically driven Submersible Pumping set of reputed make capable of delivering 1150 LPM against a head of 75 mtr along-with electric panel board consisting of electric appliance such as automatic Starter, Main Switch. Volt Meter, Ampere Meter, ELCB, Shunt Capacitor, Single Phase Preventer, Indicating Lamps, MVB/MCCBs etc. including G.I Column Pipe of suitable size 72 m (in 3 m Lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (of reputed make) complete in all respects. As per ISI 1239-2004

Rate of Motor with Pump

Panel Board

Submersible cable Size 10.00mm2

Column Pipe (G.I) 100 mm i/d

Sluice Valve Providing & fixing C.I D/F Sluice Valves ISI marked 14846-2000, including cost of tail piece, rubber joint, gland dori, Nuts, bolts & accessories, complete in all respects

Construction of brick masonry sluice valve chamber size 0.90m x 0.90m complete in all respect.

Providing, Fixing, laying, jointing, cutting & testing of uPVC Pipes & Specials (6 kg./cm2) including cost of excavation complete in all respects. Excavation with JCB

uPVC Pipe 90 mm o/d

uPVC Pipe 63 mm o/d

Making Connection with existing pipe line including cutting cost of D-Joint, labour for fixing specials excavation including bailing out etc

Dismantling and restoration of Cement Concrete complete in all respect

Dismantling and restoration of Interlock Tile complete in all respect

House Water Connection Providing Proposed water connection to house hold up to wall with providing laying, jointing, testing G.I. pipe lines 15mm i/d =2.5 mtr B class as per CSR 28.36(A) (Above G.L.) Providing and fixing MDPE pipe 15mm i/d with specials 2.00 mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc cutting, threading and testing trenchs in the ground and ISI 15mm i/d GM ferrule s per IS 2692 and 3" i/d clamp with C.I. bib cock 15 mm i/d as per IS 210 with stainless steel spindle of approved make as per CSR 30.65(b)

New Connection

Shifting Connection

Repair of Pump Chamber

Hollock shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. panelled, glazed or glazed and panelled.

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them) (a) 30mm thick Cup Board

Kiln seasonal Hollock wood cup board chowkats including iron hold fasts, iron hinges corner straps, wooden knobs or handles fixed in position (Size 45 x 60mm). (a) 30mm thick Cup Board

Applying Pink Primer or-aluminium priming coat including preparation of surface noting & stoping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with methal primer on new steel or iron work including preparation of surface.

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Cement Concrete 1:2:4 gola 10cm×10cm concave quardrant along junction of roof with parapet wall finished smooth where specially specified

White washing 3 coats inside of pump chamber

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point without fan box

Wiring light point

Wiring 6 Amp. Plug control comprising wall socket point.

Wiring 16/20 amp. power plug control point.

GALVANIZED IRON PIPES AND G.I. EARTHING: Supply & erection of G.I. pipe (A-Class) as per IS:1239 (Part-I) 2004 including sockets, bends, inspection boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-

Earthing with 8 S.W.G. (4/mm dia.) G.I. wire in 15mm dia pipe with G.I. reducing socket 50mm x 15mm (upto 14 Metre in length)

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Construction of gravel pit inside the Pump Chamber complete

Finishing wall with cement based water soluble exterior paint such even shade.

Providing and fixing of Glass strips 4mm thick in floors

50mm wide

40mm wide

Preparation of Ball putty plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade

PLINTH PROTECTION OF OHSR 100000 LTR CAP

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation

Cement concrete 1:8:16 with stone aggregate 40mm guage mixing by mechanical means using concrete mixture volumetric type

First class Burnt Brick work laid in cement sand mortar 1:5 in foundation and plinth

12.5mm Thick cement plaster 1:4

Earth Filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cum layers including ramming, watering and consolidating upto 30 meters.

Cement concrete 1:8:16 with stone aggregate 40mm guage mixing by mechanical means using concrete mixture volumetric type

Conglomerate floor 40mm cement concrete topping 1:2:4

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. Two or more coats to give even shade.

Construction of Foot Path with masonry toe wall & earth filling and Cement Concrete 1:8:16 with 40 mm gauge stone aggregate, 40 mm thick cement concrete topping 1:2:4, inside water works complete in all respect