Loading
Loading…
Loading…
Tender Value
₹19.0 Cr
EMD Value
₹37.9 L
Closing Date
5 Jun 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
Yes
07/05/2026 11:00
Lowest to Highest
90 days
Expenditure
Capital (Works)
HQ TENDER
16 conditions · 5 needing a document upload
Financial Eligibility criteria as per para 2.5.3 of Tender Document.
Bid Capacity: Refer para 2.5.4 of Tender Document
Similar Nature of work as per para 2.5.1 of Tender Document.
Technical Eligibility as per para 2.5.2 of Tender Document.
Documents to be submitted along with tender as per para 14 of GCC.
3 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Format for self certification Regarding local content for Telecom products, services or works certificate (Form-1) as per DoT Notification No.18-10/2017-IP dated 29th August 2018 must be submitted by the tenderer and the concerned OEM for all Telecom products and for overall tender as Annexure-4
Tender specific authorization certificate (MAF) from the OEM (IP- MPLS routers) is required for the bidder to participate in the bid. Note: Bidder should submit this authorization certificate issued by the OEM (IP-MPLS) with the bid otherwise the offer/bid will be summarily rejected.
Provision of Telecom assets with IP-MPLS based technology at Balance stations of Southern Railway
HQ_MAS_IPMPLS_Balstn_01
HQ_MAS_IPMPLS_Balstn_01
Open
Works - General
9 Months
Chennai, Tamil Nadu
₹0
₹37.9 L
5 Jun 2026
27 Apr 2026
22 May 2026
7 May 2026
45 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 18,97,01,388.8 | ||
| — | 140.00 | — | — | ||
| Design, Fabricate, Supply, installation, configuration, testing and commissioning of Label Edge Router (LER)as per RDSO Technical Advisory Note (TAN) No. STT/TAN/IP-MPLS/2020 Ver 3.0, Amd-1 or latest with non-blocked switching throughput of 160 Gbps full duplex or higher. The router should have console interface, FAN Module, Redundant control card modules, Redundant 48V DC power supply modules etc., including connecting cables and fixing accessories. The IP-MPLS router should support minimum 8X10G, 32X1G and 32X E1. The Router should be equipped with following interfaces & cards, (i) 4 X 10G (Optical) ports distributed in minimum two cards, minimum 2X10G in each card with fully loaded. (ii) 8 X 1GbE ports distributed in minimum two cards, minimum 4X1GbE in each card with fully loaded. (iii) 4 X 1GbE ports with fully loaded. (iv) 16 X E1(G.703) two cards.(v) Option of WDM module internal or vide external box facility to be available. Note: - Supply of SFP for optical ports 10GSFP or 1GbE- SFP range (upto 40 KM) and number of Fiber (single or dual) to be decided as per site requirement. For 8 X 1 GbE and 4X 1 GbE card option of electrical or optical port as per site requirement decided by the officer in charge during the course of execution of the work. (supply got cleared Trusted Telecom portal before supply of equipment) (Inspection by RDSO). This also include "Installation of switches, with power distribution panel and all accessories in the Rack (19") , DDF, Aluminum runway ladder, patch cord etc and their testing and commissioning. This includes termination of all E1's on DDF, connection of pigtails, optical patch cords, CAT6 Cable and 48 V bus to the IPMPLS equipment including supply of wires and connectors. It also includes proper mounting of rack, provision of Aluminum runway ladder, casing and capping and conduit pipe as per requirement at each station, other materials from stores supplied by Railways for installation. (Conduit pipe/casing and capping with ISI standards, aluminum runway ladder and all other miscellaneous materials should be supplied by the contractor)." | — | — | — | 11,88,96,036 | |
| — | 20.00 | — | — | ||
| "Supply of 4 port x10G SFP module card suitable for the IP MPLS router (The card should be compatible and suitable with existing system available in section) ( Inspection by RDSO )" | — | — | — | 3,89,600 | |
| — | 20.00 | — | — | ||
| "Supply of 8 port x 1GbE (4 nos of optical ports and 4 nos of electrical ports) module card suitable for the IP-MPLS router (The card should be compatible and suitable with existing system available in section)( Inspection by RDSO )" | — | — | — | 4,67,520 | |
| — | 20.00 | — | — | ||
| "Supply of 16 port channelized E1 interface card suitable for the IP-MPLS router (The card should be compatible and suitable with existing system available in section) ( Inspection by RDSO )" | — | — | — | 9,89,580 | |
| — | 72.00 | — | — | ||
| "Supply of SFPs for 1Gbe (optical)/RJ 45ports as per the site requirement ( Inspection by RDSO )" | — | — | — | 4,32,216 | |
| — | 36.00 | — | — | ||
| "Supply of SFP + 10G (40 km) SMF, 1550 nm for 40 km transmission working on single or dual fibre as per site requirement ( Inspection by RDSO )" | — | — | — | 8,59,068 | |
| — | 6.00 | — | — | ||
| Design, Fabricate, Supply, installation, configuration, testing and commissioning of rack mountable modular intelligent service IPMPLS aggregator router (Label switching Router) with minimum switching speed of200 Gbps, unit tosupportL2VPN ,L3 VPN, MPLS-TE , unit to be capable to support 8x10G (optical) ports distributed in two cards and possible to upgrade 16x10G(optical), this should also support multiple routing functions such as OSPF,ISIS,BGP & MP-BGP and support LDP and RSVP - TE to dynamically establish MPLS tunnels & PW service. It should support dual main control card redundancy design supporting 1:1 hot backup. The router should have console and SNMP interface, FAN Module , Redundant control card modules and Redundant 48VDC power supply modules including connection cable and fixing accessories etc. The Router should have required interface slots to accommodate 2X50G interface and capable to upgrade to 2 x100G modules from day one for aggregation purpose (supply of these interface cards is not covered in this item). . The router should support all the software features, environmental standards and security features as mentioned in RDSO technical Document no. STT/TAN/IP-MPLS/2020Ver3.0 or latest for the LSR Router (supply got cleared Trusted Telecom portal before supply of equipment) ( Inspection by RDSO ). | — | — | — | 35,06,400 | |
| — | 100.00 | — | — | ||
| Supply and installation of fully covered 19'' Racks of size 2200 mm X 600 mm X 600mm complete with all fittings including DC Fans (48 V) -2Nos, with air filters at the sides. Separate or sheet/plate to keep testing equipment's - 1 No and AC Power distribution panel(horizontal fitting) with power sockets and fuse/MCB protection (minimum 6 Nos of230V- 15A/5A. combined) and other accessories. Rack should have compatibility with all equipment conforming to DIN41494 or equivalent EIA/ISO/EN standard, Manufacture must certify that products are complied withDIN41494 or equivalent EIA/IISO/EN/CEA/UL standards(Inspection by RITES) | — | — | — | 36,05,600 | |
| — | 100.00 | — | — | ||
| "Supply of VRLA fully charged battery 48 V DC /300 AH (stackable) as per IRS:S- 93/96(A)(amd-1) or latest.(Inspection by RDSO)." | — | — | — | 1,29,70,900 | |
| — | 100.00 | — | — | ||
| Supply of 25A, 48 V (2+1) FR/FC module RDSO /SPN/TC/23/1999 or latest with AC input range 90-300 Volts, (Inspection by RDSO) | — | — | — | 1,14,78,700 | |
| — | 100.00 | — | — | ||
| Supply installation of DC Power distribution panel to cater DC power requirements of IPMPLS/STM Multiplexers /PD Muxes / EOW /FANS to be fixed in 19"" rack with inbuilt line filter & Surge protection on 48V DC to be catered the demand of the load. (Minimum 8 Nos of DC distribution arrangement with MCB's of suitable rating for -ve. Connecting copper strip for +ve) (Inspection by Consignee) | — | — | — | 3,25,500 | |
| — | 140.00 | — | — | ||
| "Supply of DDF (120 Ohms) for terminating 16 E1s of wrapping type and mountable on 19"" rack, similar to puncom. (Maximum width 2U size) (Inspection by Consignee)." | — | — | — | 3,64,700 | |
| — | 100.00 | — | — | ||
| Installation, wiring and testing of battery sets and battery chargers for optic fibre circuits. This includes installation of AC and DC power supply distribution board with MCB's of suitable rating, wiring of external alarm contacts, Fixing arrangements for battery and charger in the equipment room with 25 sq.mm Multistrand single core Copper cable PVC insulated from Battery charger to Battery with suitable copper lugs crimped/soldered to it, 16 sq.mm Multistrand single core Copper cable PVC insulated from battery charger to power distribution panel in the rack with suitable copper lugs crimped/soldered to it. Connection from Battery charger body and battery +ve terminal to Earth terminal by 16 Sq.mm Multistrand single core Copper cable PVC insulated separately with suitable copper lugs crimped/soldered to it and Extension of AC 230V power supply wiring through PVC pipe with 6 sqmm cu. wire for phase & neutral and 1 sqmm cu .wire for earth to the 19" rack (Copper cables , 20A metal clad with MCB for AC supply to fix in the wall, conduits and other miscellaneous materials required for the work should be supplied by the contractor).(Inspection by Consignee). This work also includes transportation of materials from stores/ supplied by Railways for installation. | — | — | — | 15,61,700 | |
| — | 250.00 | — | — | ||
| Transportation of light materials/men with tools, documents from central location to the work spot and back. | — | — | — | 4,96,465 | |
| — | 18.00 | — | — | ||
| Supply of Tool Kit consisting of Optical power meter, Digital Multimeter, Ethernet Crimping Tool, LAN tester, Krone tool, Rapping Tool, Universal Spanner Set, Screw Driver Set (7 Pieces set), Cutting plier, Wire Stripper. as per Spec in the Tender document with OEM test report and warranty certificate (inspection by CONSIGNEE ) | — | — | — | 3,32,802 | |
| — | 12.00 | — | — | ||
| Supply of optical time Domain Reflectometer with VFI (OTDR) as per Spec in the Tender document with OEM test report and warranty certificate of reputed make like EXFO 735D or latest of better make (inspection by RITES ) | — | — | — | 35,52,000 | |
| — | 640.00 | — | — | ||
| Supply of optical patch cords with FCPC/SCPC to SCPC/LCPC connecters (10 mtrs long), so as to suit OFC terminations and the IPMPLS equipment supplied. (Inspection by CONSIGNEE) | — | — | — | 64,268.8 | |
| — | 15.00 | Man-Week | — | ||
| Training of Railway staff at the factory premises of manufacturer of IP-MPLS equipment (or) at a reputed training institution as approved by railway executive InCharge. This includes boarding and lodging charges. (Travel expenses will be borne by the railways). | — | — | — | 2,58,597 | |
| — | 100.00 | — | — | ||
| Supply of 10G SFP+ Module with 80 Km range for above Routers as per technical specification (Inspection by RDSO) | — | — | — | 32,62,396 | |
| — | 54.00 | — | — | ||
| Supply, Installation, testing, configuration and commissioning of 2 x 50GE interface module cards suitable for existing IPMPLS Devices (LSR & LER) for strengthening of the IPMPLS network with inter division connectivity as per technical specification (Inspection by RDSO) | — | — | — | 1,02,38,940 | |
| — | 96.00 | — | — | ||
| Supply and installation of 50Gbps QSFP28 Package - Optical Transceiver module dual fibre suitable and supporting 80Kms - long range for item no.20 as per technical specification (Inspection by RDSO) | — | — | — | 1,42,84,800 | |
| — | 1.00 | — | — | ||
| Supply and installation of NMS as per RDSO spec STT/TAN/IP-MPLS/2020 Ver 3.0 with Amd 1 or latest with features and functional requirements as specified in Clause G of the RDSO TAN ver 3.0 for HQ NoC with active, standby system hardware and 5KVA online UPS with one hour backup (Min 42AH battery) (Inspection by RDSO) | — | — | — | 13,63,600 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
RDSO TAN 3 with Amd No 1 for IPMPLS
ATTACHMENT
PoC guidelines
ATTACHMENT
3.2025-12-04-POCFormat.pdf
ATTACHMENT
GCC2022withACS1to11.pdf
ATTACHMENT
5.NetworkMapforIPMPLSBalanceStationoverSR.pdf IPMPLS Network Map
ATTACHMENT
6.StationNameofBalanceIP-MPLS.pdf
ATTACHMENT
7.TelecomTrustedPortalRBletter.pdf
ATTACHMENT
8.localcontentwithgezettee.pdf
ATTACHMENT
Topology.pdf
ATTACHMENT
Tender Document
ATTACHMENT
1.2025-08-07-TANforIPMPLSVer3_0withAmdtNo_1_1.pdf
ATTACHMENT
2.2024-07-26-SignPoC_guidelines_final_to_ZRs.pdfSECURED.pdf
ATTACHMENT
5.NetworkMapforIPMPLSBalanceStationoverSR.pdf
ATTACHMENT
IP-MPLSBalanceTenderDocument27.04.2026_1.pdf
ATTACHMENT
RevisedTenderDocument1.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .