GE(S)/M-28/2022-23

Amount

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, bed of manholes etc complete all as specified and directed.

M&L for cement concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in mass concrete as in sunken floor, complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in coping, of brick masonry wall including weathering slightly rounded or chamfered angle & throating complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

M&L for brick work (EXCEPT BRICKS), straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

S&F pre-laminated lead free factory made 18mm (± 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cum and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness including dismantling existing board complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with particle board and plywood face panel, commercial ply on both sides with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening at site, complete all as per specifications & drawing.

S&F anodized aluminium window and ventilator shutters, side hung or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges 100mm long (2 Nos) and suitable handles as required, complete all as specified and directed.

S&F as in repair 100mm long butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F as in repair 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F as in repair 150mm long extruded aluminium handle, fabricated ype, anodised complete all as specified and directed.

S&F "as in repair" continuous (piano) hinges, mild steel, bright finish or electro galvanised 30mm width of flaps (when open), complete all as specified and directed.

S&F as in repair 100mm size hasp and staple, safety type, aluminium with aluminium hinges pin including bolts to hinge plate and fixed with screws including hinge plate and fixed with screws complete all as specified and directed.

S&F GI wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or beads, MS plate, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F doctor fixit pidifin 2k performance 2 component flexible acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume complete all as specified and directed.

M&L forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as per specified and directed.

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note:- (i) Rate includes providing and making necessary arrangements for scaffolding for G+3 bldgs. (ii) Contractor shall be visit site before quoting the rates.

M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.

M&L for 40mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors laid in panels n. exc. 2.5 Sqm with top finished the surface even and smooth using extra cement including glass dividing strips as per site requirement complete all as specified and directed

M&L for Fly Ash glossy finished coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 200mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for marble work (Green / Black marble Bhaislana Zebra) 18-20mm thick (table rubbed and polished) as in cooking plateform, window cills, jambs, steps and like over and including 15mm thick screed in CM 1:4 including pointing with white cement (1:2) using marble dust with admixture of pigment to match the marble shade including rounding the exposed edges full round, and making hole for gas pipe including demolition of existing marble work, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges if required including demolition of existing stone slabs and tiles any description or thickness complete all as specified and directed.

M&L for machine cut kota stone tiles as in riser of steps / pillars / skirting / dados 16mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding the edges of kota stone laid over and including 10mm thick rendering in CM 1:4 to recieve stone slab, including demolition of existing stone slabs and tiles any description or thickness complete all as specified and directed.

M&L for rounding edges of granite stone slab edge, in steps, cooking plateform and other similar situations complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of oil bound distamper white or tinted complete all as specified and directed.

M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of cement based paint white or tinted complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, including hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips,complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type in square not exc 0.50 Sqm each pane, fixed with oil putty, including hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips,complete all as specified and directed.

S&F "as in repair 4mm thick sheet glass, ordinary quality and glazing with oil putty or rubber beading in aluminium frame in square n. exc 0.50 Sqm in each pane, including hacking out old one complete all as specified and directed.

S&F "as in repair 4mm thick sheet glass, ordinary quality and glazing with oil putty or rubber beading in aluminium frame in square exc 0.50 Sqm in each pane, including hacking out old one complete all as specified and directed.

M&L for preparation of newly steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly wood & wooden based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Cutting 15/20mm existing steel tubing for alterations or additions (Each cut measured) in position without taking down complete all as specified and directed.

S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 15mm bore brass CP mixer for mixing HOT & COLD water screwed down for iron pipe complete all as specified and directed.

S&F "as in repair" 15mm bore brass CP wall mixer for mixing HOT & COLD water screwed down for iron pipe complete all as specified and directed.

S&F "as in repair" syphonic action kit for PVC flushing cistern of 10 Ltrs capacity, complete all as specified and directed.

S&F "as in repair" CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.

S&F "as in repair" chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F "as in repair" PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F "as in repair" stack clamps made out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts securing ends of stay to walls or roof for 75mm bore pipe complete all as specified and directed.

S&F "as in repair" stack clamps made out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts securing ends of stay to walls or roof for 110mm bore pipe complete all as specified and directed.

S&F "as in repair" 75mm bore PVC (SWR) rain water pipes, single socketed, in any length with rubber ring joints, laid or fixed to walls, including stack clamps made out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.

S&F "as in repair" 75mm bore PVC (SWR) rain water pipes, single socketed, in any length with rubber ring joints, laid in floor or trenches complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) rain water pipes, single socketed, in any length with rubber ring joints, laid or fixed to walls, including stack clamps made out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) rain water pipes, single socketed, in any length with rubber ring joints, laid in floor or trenches complete all as specified and directed.

S&F "as in repair" 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F "as in repair" stainless steel kitchen plate rack of size 750mmx900mm, made of stainless steel 1mm thick, fixed with plastic plugs and mild steel screws, complete all as specified and directed.

S&F "as in repair" sink without drainage board, made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1200mmx460mm bowl size 410mm x 330mm x 160mm including CP waste coupling and 32mm dia waste pipe including making disturbed surface to match with existing surfaces, complete all as specified and directed.

S&F "as in repair" Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

S&F "as in repair" Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover for pedestal pan and connecting etc, complete all as specified and directed.

S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from water tank and from mouths of circulating pipes without disconnecting tank of capacity exc 250 Ltrs but not exc 500 Ltrs, complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position complete all as specified and directed. (Note:- Reinforced cut as required to facilitate demolition).

Demolition of unreinforced cement concrete and pavimg n. exc. 15cm thick in floor, and similar works complete all as specified and directed.

Demolition of stone slabs and tiles any description or thickness in floors/walls jointed and pointed in any mortar complete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer at any height complete all as specified and directed.

S&F as in repair brass ball valve high pressure with polythene float & fly nut complete screwed for iron pipe and fixed to 20mm bore pipe complete all as specified and directed.

S&F 30mm thick UV flush door shutters with MS tube frame of 19mm gauge thickness and of size 19mmx19mm from stile, top and bottom rail. MS frame have a coating of primer, the frame shall cover with 5mm thick UV printed sheet on both sides and PVC profile filled in between two sheets complete all as per manufacturer's instructions and directed by Engineer-in-charge.

M C ENTERPRISES

RD Engineers

Alishan Builders

Bidder Name

dadwal engineers

RD Engineers

Alishan Builders

M C ENTERPRISES