Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹8.0 L+₹2.2 L (37.4%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | M/S KOTWAL CONSTRUCTIONS L1 | m/s girdhari lal parihar L2 |
|---|---|---|---|---|---|
| 1.00 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-charge. | 5 | Cum | 5 ₹25 Lowest | 7 ₹35 |
| 2.00 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. | 5 | Cum | 2,000 ₹10,000 Lowest | 6,500 ₹32,500 |
| 3.00 | Taking down cement plaster any description on brick or stone wall/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-charge. | 40 | Sqm | 5 ₹200 | 4 ₹160 Lowest |
| 4.00 | M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. | 60 | Sqm | 140 ₹8,400 | 120 ₹7,200 Lowest |
| 5.00 | Material and Labour for preparation of old decorated plastered or un plastered surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots, removal of vegetation and applying Two coat of white wash/ colour wash on walls complete all as specified and directed by Engineer-in-charge. | 60 | Sqm | 20 ₹1,200 | 9 ₹540 Lowest |
| 6.00 | Material and Labour for preparation of old decorated plastered or un plastered surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots, removal of vegetation and applying one coat of white wash on ceilings complete all as specified and directed by Engineer-in-charge. | 20 | Sqm | 10 ₹200 Lowest | 12 ₹240 |
| 7.00 | Material and Labour for preparation of old distempered surface of walls including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, stopping of distempered surface and applying one coat of oil bound distemper on walls of approved shade complete all as specified and directed by Engineer-in-charge. | 60 | Sqm | 10 ₹600 Lowest | 45 ₹2,700 |
| 8.00 | Material and Labour for preparation of old decorated plastered or un plastered surfaces including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots, removal of vegetation and applying one coat of cement base paint of approved shade complete all as specified and directed by Engineer-in-charge. | 80 | Sqm | 20 ₹1,600 Lowest | 28 ₹2,240 |
| 9.00 | Material and Labour for preparation of old painted surfaces of steel of any description exceeding 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint of approved shade complete all as specified and directed by Engineer-in-charge. | 150 | Sqm | 20 ₹3,000 Lowest | 48 ₹7,200 |
| 10.00 | Material and Labour for preparation of old painted wood and wood based surfaces of any description not otherwise described over/exceeding 10cm width or girth and applying one coat of synthetic enamel paint on wooden surface of approved shade complete all as specified and directed by Engineer-in-charge. | 40 | Sqm | 20 ₹800 Lowest | 48 ₹1,920 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
4 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Bhalra
AGE (I) Bhalra CO 56 APO
REPAIRS TO BRICK WORK, PLASTERING, AND PERIODICAL SERVICES IN RR UNITS AT KISHTWAR AREA OF 5 SECT UNDER AGE (I) BHALRA (NIT No. 34 of 2025-26)
2025_MES_720254_1
AGE (I)/BHalra- /2025-26 (NIT No. 34 of 2025-26) )
Open Tender
Civil Works
Item Rate
180 days
AGE I Bhalra
Please refer tender documents
7 documents required · 7 mandatory
₹500
AGE (I) Bhalra
₹20,000
23 Sept 2025
14 Jul 2025
11 Aug 2025
14 Jul 2025
4 Aug 2025
28 Jul 2025
Amount
Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-charge.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster any description on brick or stone wall/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-charge.
M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of old decorated plastered or un plastered surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots, removal of vegetation and applying Two coat of white wash/ colour wash on walls complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of old decorated plastered or un plastered surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots, removal of vegetation and applying one coat of white wash on ceilings complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of old distempered surface of walls including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, stopping of distempered surface and applying one coat of oil bound distemper on walls of approved shade complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of old decorated plastered or un plastered surfaces including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots, removal of vegetation and applying one coat of cement base paint of approved shade complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of old painted surfaces of steel of any description exceeding 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint of approved shade complete all as specified and directed by Engineer-in-charge.
Material and Labour for preparation of old painted wood and wood based surfaces of any description not otherwise described over/exceeding 10cm width or girth and applying one coat of synthetic enamel paint on wooden surface of approved shade complete all as specified and directed by Engineer-in-charge.
Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete all as specified and directed by Engineer-in-charge.
S&F, Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed by Engineer-in-charge.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed by Engineer-in-charge.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed by Engineer-in-charge.
Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by Engineer-in-charge.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-charge.
S&F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed by Engineer-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge.
S&F 150 mm long Aluminium anodised,handle of extruded section cast type anodised and fixed complete all as specified and directed by Engineer-in-charge.
S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-charge.
S&F 250 mm long Aluminium alloy ,anodised sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixed bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engineer-in-charge.
S&F butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, complete all as specified and directed by Engineer-in-charge.
Supply & Fix 100 mm long Butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed by Engineer-in-charge.
S&F aluminium powder coated sliding windows with three sliding pane , two of glass and one of wiremesh , shutter glazing with and including 4 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips, frame, with duco pattern grill of size 75mm x75mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slides including making good of wall surfaces to match with existing surfaces complete all as specified and directed by Engineer-in-charge.
S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed by Engineer-in-charge. :- (a) Frame 65x38x1.60mm thick with rawl plug (b) Middle and lock rail : 150x44x1.6mm thick (c) Bottom rail : 150x44x1.6mm thick (d) Top rail/sype : 85x44x1.6mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer ( Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete.
Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for, complete all as specified and directed by Engineer-in-charge.
S&F mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc. with ends of barsshouldered and / or riveted or forged into spikes, and similar work confirming to Fe 290.Gde-E-165 complete all as specified and directed by Engineer-in-charge.
Dismantling water tanks of capacity 1000 Ltrs and removing to store complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for Rotational moulded polyethelene water storage tanks of capacity 1000 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.
Dismantling water tanks of capacity exc 250 & n exc 500 Ltrs and removing to store complete all as specified and directed by Engineer-in-Charge.
S&F for Rotational moulded polyethelene water storage tanks of capacity 500 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for vitrified coloured ceramic tiles, light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for glazed coloured ceramic tiles in vertical surface 350x250x7 mm/450x350x7mm thick, set & jointed in neat cement slurry & pointed in coloured cement to match the tile over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
m/s girdhari lal parihar (BID ID -3382164)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .