SPECIAL REPAIRS OF COOK HOUSE, KITCHEN BLDG NO T10A 10B NEAR OFFRS MESS AND BLDG NO T15 JCO MESS IN RA AT CAD PULGAON

Amount

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm but n. exc 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside the premises complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and as directed.

Dismantling of ceiling board(Fibre,pulp,,insulation etc) or insulation board / slabs/any thickness including cover fillets complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in Unframed work complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar complete all as specified and as directed.

S&F Aluminium anodized barrel tower bolts, 150mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type anodised size of handle 150mm complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F of flat iron bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gate, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fast, bolt, wall ties, hooks for hanging fans and other similar small steel article conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.

S & F of pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.

S&F pressed steel frames 125x60mm for doors with one or more rebated incl, necessary fixing lugs hinges lock strike plate etc complete all as specified and as directed.

M&L for Cement concrete type C-0 (1:3:6) using 12.50 mm graded stone aggregate as in filling in pressed steel chowkhat,fixing of hold fast etc complete all as specified and as directed.

S&F decorative aluminium grill,weight not less than 3.13 kg/sqm (with frame of size 20 x 20mm aluminium cleat screwed to main frame) and fixed to wall/window/ventilator with screws complete all as specified and as directed.

S&F factory made 2nd class hardwood 35mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9mm B.W.P commercial ply of 12 mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS : 1003 (part 1) klin seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made 2nd class hard wood 35mm thick glazed & skeleton shutters open rebated & prepared to received glass, gauze etc (without sash bars) edges of & mitred beads for securing glass etc complete all as specified and as directed.

Supply & Fixing Powder coated (minimum thickness of powder coating 50 micron), anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangements complete all as specified and directed.

Supply & Fixing 5.5 mm thick Sheet glass ordinary quality and fixed inside aluminium frame exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F of Stainless steel wire cloth, 0.36mm normal dia of wire and avg. width of aperture 1.40 mm and fixed with stinless steel wire staples complete all as specified and directed.

S & F in repair of Stainless steel wire cloth, 0.36mm normal dia of wire and avg. width of aperture 1.40 mm and fixed with stinless steel wire staples complete all as specified and directed.

M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M & L for preparation of Old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of Old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F of 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 450 mm X 350 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 10 mm thick CM 1:4 all as specified. complete all as specified and directed

M & L for providing 25 mm thick cement concrete 1:2:4 (using 12.5 mm thick graded stone aggregate) as in sub base floor surface finished even without suing extra cement complete all as specified and directed.

M & L for Non skid ceramic coloured tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exc. 0.36sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 15 mm thick screed bed (1:6) CM complete all as specified and directed.

M&L 9mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified & directed.

S & F in repair 18/19 mm thick Veneered particle board exterior grade , solid core general purpose type, with face veneers of type 'BB' fixed with steel screw to timber frame work or wall complete all as specified and as directd.

S&F 40mm dia cupboad knobs fixed with nuts, screw and washer of mild steel bright finish complete all as specified and directed.

S&F 50mm Butt hinges medium weight cold rolled mild steel complete.

Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of incl end curve portion an colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating (AZ-150) GI based steel corrugated profile ridge sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F structural steel work conforming to Fe-410W Gde E-250, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified.

Dismantaling of stone slab and tiles description or thickness or thickness in floor laid bedded and pointed in any mortar etc. complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:6 complete all as specified and directed.

S & F 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed

S&F in repair Bib tap long body cast copper alloy with chromium plated fancy type screwed suitable for 15 mm bore for iron pipe, complete all as specified.

S&F in repair angle valve cast copper fancy type chromium plated screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified.

S & F of in repair 15 mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Dismantling of water tank exc. 250 Litres but not not exc. 500 Litres capacity complete all as specified and directed.

S & F rotational moulded polythylene water storage tank with 20mm PTMT float valve, plastic lid cover, tripple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs incl making connections complete all as specified and as directed.

Taking down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed.

Taking down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed.

S&F 15 mm dia galvanized pipes medium grade with all fittings concealed in wall and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.

S&F 20 mm dia galvanized pipes medium grade with all fittings concealed type fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Fixing only 15 mm dia tubes, any grade, to walls concealed fitting and ceilings or laying in floors complete all as specified and as directed.

Fixing only 20 mm dia tubes, any grade, to walls concealed fitting and ceilings or laying in floors complete all as specified and as directed.

S & F in repair stain less steel kitchen sink made out of 1mm thick sheet including stainless steel waste fittings and pvc waste pipe of 40mm dia . The over all size of sink 915x460mm and bowl size 410x330x160mm fixed with brackets or ms angle or GI pipe 15mm dia with proper arrangments to hold and fitting of sink complete all as specified and directed at site.

S&F in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and as directed.

S&F in repair PVC SWR pipes 75 mm bore single socketed including bend, tee etc. in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on other than fair face of stone wall surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on fair face of stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces) complete all as specified and as directed.

M&L for preparation of new or old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty on new plastered surfaces of wall complete all as specified and as directed.

M&L for preparation of new or old plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick wall surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

S&F in 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S & F in repairs brass chromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection/path laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

100mm thick PCC (1:4:8) type D-2 (using 40mm gradded crushed stone aggregate) as in sub base complete all as specified and directed.

M & L for providing 40 mm thick cement concrete 1:2:4 (using 20 mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement complete all as specified and directed.

M& L for IInd Class Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

Taking down carefully concealed/ casing caping point wiring copper / aluminium (light / fan / scoket) complete (with fittings such as switches ceiling rose, pendents, regulators sockets etc) and making good disturbed surface with exisitng specification complete all as specified and as directed.

Material and Labour for point wiring complete with 1.5sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC Concealed Conduit of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting modular switches / sockets and fan regulators etc for One light point controlled by one switch one way.complete all as specified and directed for the following:-

All as per item No 74…. but for One ceiling fan / exhaust fan / wall mounting fan point controlled by one switch one way

All as per item No 74... One socket outlet three pin 5/6 Amps controlled by one switch on the same board.

All as per item No 74.. One switch socket outlet three pin 5 /6 Amps controlled by one switch on independent board.

Material and Labour for point wiring with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLSH , PVC insulated and unsheathed cabel 1100 volts grade, ISI marked drawn in and incl PVC Concealed Conduit of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting modular switch socket complete all as specified and directed.

Supply and fixing in replacement Modular switch 1 way 6A, 1 module complete all as specified and as directed..Make : Havells/SSK/Cona

Supply and fixing in replacement Socket, 6A - 2/3 pin combined 2 module (for same bd) compete all as specified and as directed..Make : Havells/SSK/Cona

Supply and fixing in replacement modular Switch socket outlet 3 pin 6 amp' flush type complete (for independent bd) all as specified and directed including taking down old U/S one. .Make : Havells/SSK/Cona.

Supply and fixing modular Switch socket outlet 3 pin, 16 amp, flush type complete all as specified and directed..Make : Havells/SSK/Cona .

Supply and fixing ceiling rose surface type with 3 terminals complete including taking down old U/S one .Make : Havells/SSK/Cona

Supply and fixing Fan step regulator, 120W - 2 module complete including taking down old U/S one . Make : Anchor/Cona/Havells

Supply and fixing lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed Make : PLAZA/SSK/Cona

Supply and fixing modular metal box flush type 3 module including taking down old unserviceable complete all as specified and as directed. Make: Standard/Havells/ Anchor

Supply and fixing modular metal box flush type 4 module including taking down old unserviceable complete all as specified and as directed. Make: Standard/Havells/ Anchor

Supply and fixing modular metal box flush type 8 module including taking down old unserviceable complete all as specified and as directed. Make: Standard/Havells/ Anchor

Supply and fixing modular cover plate with frame 3 module including taking down old unserviceable complete all as specified and as directed. Make: Standard/Havells/ Anchor

Supply and fixing modular cover plate with frame 4 module including taking down old unserviceable complete all as specified and as directed. Make: Standard/Havells/ Anchor

Supply and fixing modular cover plate with frame 8 module including taking down old unserviceable complete all as specified and as directed. Make: Standard/Havells/ Anchor

S&F LED tube light lamp 1 x 18/20 watt retrofit including suitable size of batten complete (01 set) (single / double side connection) all as specified and directed including taking down U/S old any type of TL fitting. Make Havells /Philips/Bajaj .

Supply and Fix to wall / pole of any height LED bldg security light 25 watt IP 65/66 including GI pipe suitable size bracket not less than 1 metre bend to shape with 2 clamps, nuts, bolts, washers and PVC 3 core ISI mark flexible wire from ceiling rose to fitting complete including taking down u/s lights all as specified and as directed. Make: Crompton/Bajaj/Havells

Supply and fix with replace of LED recessed mounted 2'X2' 36 Watt light along with fixture complete all as specified and as directed. Make : Havells/ Philips / Wipro

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN,8 way with 200 amps rated bus bar 240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces. Make : Havells/legrand/Schneider

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 4 way with 200 amps rated bus bar 240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces. Make : Havells/legrand/Schneider

Supply and fixing in replacement 63 Amp , 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN in the MCB DB complete with connection testing and commissioning.Make:Havells/Legrand/Schneider

Supply and fixing in replacement 32 Amp , 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN in the MCB DB complete with connection testing and commissioning.Make:Havells/Legrand/Schneider

Supply and fixing in replacement 32 Amp , 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP in the MCB DB complete with connection testing and commissioning.Make:Havells/Legrand/Schneider

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core including taking down old one.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core including taking down old one.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 metre depth for foundation, laying of cables/pipes/poles etc., and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soils complete all as specified and directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Supply and lay, dry river sand filling in trenches to required width at bottom and top of cable as cable cushioning including spreading, leveling, watering and consolidation complete all as specified and directed.

Supply and laying of sub class "B" bricks having minimum compressive strength 75 kg/sqcm laid in trenches for cable protection etc complete all as specified and as directed.

Supply and lay galvanized pipe, “light grade ”, including fittings 40 mm dia (Cable Protection Pipe)

Supply and lay galvanized pipe, “light grade ”, including fittings 25 mm dia (Cable Protection Pipe)

Material and Labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 15mm bore, medium grade 7.5m long as applicable and as per plate No. 3 of SSR Part-I 2009 and as specified here in below (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B (d) 40 mm thick Pre-cast RCC 1:2:4 cover or reinforcement with 8mm TMT bars at 100mm c/c bothways with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 15mm nominal bore medium grade GI protection pipe with 4mm of earth lead upto 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

Supply and Fix in replacement of 9 Watt LED Bulb retrofit type complete all as specified and directed.Make : Havells/ Jaquar/Philips

Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size size 450 mm sweep heavy duty with, blades, and frame and louvers all as specified and as directed.Make- Bajaj, Crompton, Havells

Supply and fix in replacement of wall mounted fan of 400 mm sweep five star rated complete all as specified and as directed. Make- Bajaj, Crompton, Havells

M/s Chadha Brothers

RAJ ENTERPRISES

Chhabra Enterprises

M/S JAI BHAWANI CONSTRUCTIONS

M/s Prakash Agencies

C P Singh and Co

Bidder Name

Attar Singh and Sons

C P Singh and Co

RAJ ENTERPRISES

M/s Prakash Agencies

M/s Chadha Brothers

M/S JAI BHAWANI CONSTRUCTIONS

Chhabra Enterprises