CONSTRUCTION OF GIRLS HOSTEL AND ALLIED INFRASTRUCTURE FOR GIRL CADETS IN SAINIK SCHOOL AT AMARAVATHI NAGAR

Amount

Lumpsum price worked out by the tenderer for BUILDINGS / STRUCTURES as listed in Schedule ‘A’ Part-I

Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for PATH AND HARDSTANDIG as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VIII

SCHEDULE 'A' PART IX (D G SET ) Note: This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only.

Supply, install, testing and commissioning of 40 KVA/ 32KW, silent Diesel engine Generating Set, 415 volts, 3 phase, 0.8 Power factor, 50 Hz, 4 wire system as per IS 10001/10002 comprising of 4 K 1080TA G2, developing 156 BHP @ 1500 RPM,@ not less than 56 BHP industrial type Liquid Cooled, electric start coupled to alternator as per IS 13364 mounted on a common base frame with standard control panel for automatic starting on main control panel having meters, sound proof canopy, integral fuel tank with battery and leads and accessories complete in all respect with CPCB approved acoustic enclosure suitable for ambient condition at coimbatore including required PCC foundation height of the foundation should not be less than 45 cm from Ground level etc. capacity 52 KW/40KWA mounted as base frame complete as per manufacturers instruction and confrrming to conditions under IS 10004722/1460 BS 5514/2613/ 5000 ISO 8526/3046 with following provisions:-all as per Srl Item No.1 of Sch 'A' Part- IX (D G SET )

Supply, Install, testing and commissioning of AMF Panel, factory made outdoor type, floor mounted totally enclosed fabricated out of CRCA steel 3 mm thick, over an angle iron base frame of suitable size, hinged front panel door for easy accessibility duly powder coated, 3 phase and neutral aluminium bus bar of suitable capacity with heat shrinkable PVC sleeve insulated coating with colour code and insulated support with aluminium earth bus of size 25x3mm with terminal switch, inter connecting bus bar connection/linkage with suitable size copper bus/conductor, cable lugs, ferrules and cable glands for external connection, suitable for 40 KVA capacity DG set with bypass arrangement, microprocessor based AMF relay suitable for monitor/control volt, amps, frequency, energy & all engine parameters with protection fuses for panel instruments, battery charging system with indicator and cut off relays low and high oil pressure, high

10. Contd.... speed, over load and earth ault protection, reverse current protection duly wired with flexible copper conductor cable and cable connection with lugs/thimble complete with necessary control cabling from acoustic enclosure (DG Set) and to the AMF panel for all the operation of safety parameters of the DG set as recommended by manufacturer complete and comprising of following switch gears including mounting panel board on ground with PCC (1:3:6) bedding upto a height of 30 cm above gorund level, connecting LT Cables with panel complete all as directed.

10. Contd.... A. Incoming: (i) Contactors 100 A, 4 Pole, Coil voltage 440 Volt, with add on block and Mechanical interlock - 2 Nos (ii) MCCB, 3 Pole, 415 Volt, 25 KA, 100 Amps with auxiliary contacts, to indicate tripping of respective MCB, with adjustable thermal magnetic release- 2 Nos Make : Legrand/ABB/Schnider (iii) LED type indicating lamps 220 volts (iv) Suitable No.of ON/OFF/Reset push buttons with element (v) Control MCBs SP 6 amps C curve 10KA (vi) Battery charger with trickle/boost and rectifier - 01 No (vii) Control timers & relays12 volt DC of make ABB/L&T/Idec

B. Out Going : (i) MCCB 4 Pole, 415 Volts, 25 KA, with adjustable thermal magnetic release, 100 Amps - 2 Nos (ii) MCB, SPN, 32 Amps, 10 KA - 2 Nos.

SCHEDULE 'A' PART X (MISCELLANEOUS ITEMS) Note: This schedule is not pre-priced by MES.

INTERNAL ELECTRIC SUPPLY

S&F 20W (1X4') LED Stout plus surface and wall mounted LED batten with extruded aluminium housing and robust construction with electronic driver complete all as per Cat No.STOUTPLUS600BS20WLLED840 SPCWH of Havells or techno-commercially equivalent of other specified makes with all fixing arrangement suitable for operating voltage 100 to 270 Volts complete all as specified and as directed.

S&F 10W(1X2') LED bright surface and wall mounted LED batten, a reliable and affordable system that delivers up to 40% energy savings complete all as per Cat No LUMINEBS10WLED865SPCWH of Havells or techno commercially equivallent of other specified makes arrangement with all attachment & fixing arrangement. etc., complete all as specified and as directed.

Supply and Fix Telephone socket modular type RJ11 all as perCat No.573426 of Legrand or techno commercially equivallent of other specified with shutter etc., complete all as specified and as directed.

Supply and Fix TV CO-Axial socket outlet modular type all as per Cat No.573425 of Legrand or techno commercially equivallent of other specified etc., complete all as specified and as directed.

Supply and fix MCB DB TPN 4 way, having degree of protection as per IP 43 with metal door (double door), 415 volts, complete with 200 Amps rated copper bus bar and neutral link with provision for MCB SPN as incomer and 4P MCBs as outgoing and total number of modules equal to 4+12with blanking plates all as per or techno commercially equivallent of other specified Cat No.811840 of Indo Asian etc, complete all as speicified and as directed.

Supply and fix MCB DB SPN 8 way, having degree of protection as per IP 43 with metal door (double door), 240 volts, complete with 200 Amps rated copper bus bar and neutral link with provision for MCB SPN as incomer and SP MCBs as outgoing and total number of DB modules equal to 6 with blanking plates of L&T Cat No.BH108DDB or techno commercially equivallent of other specified etc, complete all as speicified and as directed.

Supply and fix VTPN MCCB incomer 8 way, 415 volts, powder coated double door complete with 200 Amps rated copper bus bar and neutral link with provision for MCCB as incomer and MCB TP SP MCBs as outgoing and total number of modules equal to 6 with blanking plates all as per Cat No.811882 of Indo Asian or techno commercially equivallent of other specified etc, complete all as speicified and as directed.

Supply and fix MCCB, 4 pole, 125 Amp with ultimate breaking capacity 1cu - 16KA at 415 Volts and adjustable over load setting Ics=100% Icu as per IEC 60947 Part-II,class II front face,suitable for isolation with adjustable short circuit setting all as per Cat No.830015 of Indo Asian or techno commercially equivallent of other specified etc, complete all as specified and as directed.

Supply and Fix MCB TPN 63 Amps ,415 Volts ,16KA ,''C'' series all as per Cat No.811220 of Indo Asian or techno commercially equivallent of other specified etc, complete all as specified all as directed.

Supply and FixMCB Single pole 6Amps to 32Amps ,230 Volts ,10KA,'B' all as perCat No.011008,811010,811012,811013,811014 and 811015 of Indo Asian or techno commercially equivallent of other specified etc, complete all as specified and as directed.

Supply and Fix MCB SPN 32 Amps ,10 KA 'C' seriesall as per Cat No .811034of Indo Asian or techno commercially equivallent of other specifiedetc, complete all as specified and as directed.

Supply and fix LED 3watts, Lamp Bed side reading,with controll switch adjustable lamp 230 Volts duly fixed on wall complete all as per Cat No.11498088031 of Philips Model or techno-commercially equivalent of other specified makes with all fixing arrangement complete all as specified and as directed.

EXTERNAL WATER SUPPLY

Construction of valve chamber with inner clear dimension 600 x 600 x 600mm suitable for 50mm Gate Valves with PCC 1:4:8 150mm thick type D2 for foundation,brick masonary 230mm wall in CM 1:4 PCC 1:2:4 75mm type B1 for coping, rendering in CM 1:4 including provision of3 mm thick MS sheet cover 25 x 25 x 3 mm angle frame embeded in coping with two coats of synthetic enamel paint over a coat of red oxide primer with locking arrangements, including necessary earth work complete all as specified and as directed.

Material and labour for Cutting the existing GI pipe line of 100mm dia and making GI, Union,GI Nipple with inserting Tee of size 100x100x50mm including packing with binding agents after fixing of pipe complete all as specified and as directed.

Supply, Install, Commissioning and testing of Reverse Osmosis (RO) based water purifier of out put capacity not less than 25 Litres per hour with inbuilt storage tank of capacity 50 Ltrs, electricaly operated, single phase, with built-in SMPS to operate from 120~280 V, AC 230 Volt ± 10%, 50 Hz, suitable for Input TDS upto 2000 ppm, Input Hardness 600 ppm (max), Out Put water TDS Less than 50 ppm, Booster Pump of capacity not less than 100 GPD/2 LPM, RO Membrane 80 GPD-02 Nos, with Inbuilt micron(Sediment) Filter Cartridge, UV lamp filter, activated Carbon filter, additional filter 6” PP Candle- 01 No complete including fixing on wall using necessary fixing arrangement and with all necessary connections (plumbing/electrical wiring) complete all as specified and direcetd.

EXTERNAL ELECTRIC SUPPLY

Supply and fix cable route indicator made of 15x15x6mm thick mild steel plate welded with 10mmx30cm long mild steel rod grouted in PCC block of size 0.20x0.20x0.3m and writing LT cable complete all as specified and directed.

M&L for cutting the existing bituminous road /concrete floor and including returing filling in making good to distributed surfaces to cables and making good to distributed surfaces to match with existing, complete all as specified and as directed.

Supply and fix pole mounted SMC box weather proof type with hinged type door of white colour of size 250x200x100 with 4 way PVC connector including 1 No MCB SP 6 amps and with suitable clamping arrangements for street light fittings sintex techno commercially equivallent of other specified etc, complete all as specified and as directed.

Supply and Fix Potable fire exinguisher wall mounted, Dry Powder Sodium Bi-Carbonate base and fixed with Co2 gas cartridge in each extinguisher, DCP Type, of capacity 4 Kg. Ceasefire techno commercially equivallent of other specified etc, complete all as specified and as directed

Supply and Fix Potablefire exinguisher wall mounted, with combination of mono ammonium phosphate (MAP) and ammonium sulphate, ABC Dry Powder type, of capacity 1 Kg Ceasefire techno commercially equivallent of other specified etc, complete all as specified and as directed

Krishna Engineering

Kurian And Varghese

K S MUTHU CONSTRUCTTIONS