Repairs to various wooden and steel furniture at Varanasi Cantt.

Amount

A) Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully with out disturbing the adjoining parts and Supply & Fixing new components in lieu of dismantled components including tightening the joints, screwing, welding, glueing, providing hinges, denting, placing every part in-tact, as applicable as per drgs. B) Work will be executed where the furniture exist in different User's Units of GE (East) Allahabad including BSO's Furniture Yard as directed by Engineer-in-Charge.

Table Office Officer Steel [FD-84/1003]

(a) Legs made with 1.00 mm thick MS sheet as per drg

(b) Godrej pattern 6 lever lock fixed in drawer stainless steel as per sample of Make : Hettich / Link / EBCO/ Godrej/ RINOX as per drg

(c) Repair to drawer/shutter by replacing of old u/s parts with new parts including denting, welding etc all as shown on drawing and as directed by Engineer-in-Charge.

(d) Stiffeners made with MS tube of existing size and exisitng length as per drg as directed by EIC

(e) PVC hard rubber shoe standard quality fixed with screws on each legs as per drg

(f) Welding wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

(g) Top made with 18 mm thick MDF board exterior grade (Grade 1 Type-II) ISI marked of Make: Action Tesa / Century Ply / Green Panelmax from Greenply) duly post-formed with 0.6 mm thick laminate in colour or shade as approved by GE with 2 mm thick PVC edging of Make : Rehau / Pegasus / Kynex shall be fixed on two sides fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Table Office Clerk Steel [FD-84 / 381 FD-1004]

(a) Legs made with 1.00 mm thick MS sheet as per drg

(b) Godrej pattern 6 lever lock fixed in drawer stainless steel as per sample of Make : Hettich / Link / EBCO/ Godrej/ RINOX as per drg

(c) Repair to drawer/shutter by replacing of old u/s parts with new parts including denting, welding etc all as shown on drawing and as directed by Engineer-in-Charge.

(d) Stiffeners made with MS tube of existing size and exisitng length as per drg as directed by EIC

(e) PVC hard rubber shoe standard quality fixed with screws on each legs as per drg

(f) Welding wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

(g) Top made with 18 mm thick MDF board exterior grade (Grade 1 Type-II) ISI marked of Make: Action Tesa / Century Ply / Green Panelmax from Greenply) duly post-formed with 0.6 mm thick laminate in colour or shade as approved by GE with 2 mm thick PVC edging of Make : Rehau / Pegasus / Kynex shall be fixed on two sides fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Almirah Large Steel : FD-1031

(a) Godrej pattern 6 lever lock stainless steel as per sample of Make : Hettich / Link / EBCO/ Godrej/ RINOX as per drg

(b) CP Handle as per drg

(c) Legs made with 1.00 mm thick MS sheet as per drg

(d) Repairs / adjustment to door by denting as required & as specified including replacement of hinges

(e) Repair / adjustment to existing shelf including welding or fixed with MS clamp as per drg

(f) New Door shutter of Almirah made with 1 mm thick MS sheets as per drg.

(g) New shelf of Almirah made with 1 mm thick MS sheets as per drg.

Almirah Medium / Small Steel : FD-1032

(a) Godrej pattern 6 lever lock stainless steel as per sample of Make : Hettich / Link / EBCO/ Godrej/ RINOX as per drg

(b) CP Handle as per drg

(c) Legs made with 1.00 mm thick MS sheet as per drg

(d) Repairs / adjustment to door by denting as required & as specified including replacement of hinges

(e) Repair / adjustment to existing shelf including welding or fixed with MS clamp as per drg

(f) New Door shutter of Almirah made with 1 mm thick MS sheets as per drg.

(g) New shelf of Almirah made with 1 mm thick MS sheets as per drg.

Teapoy Verandah FD : 383 / 255

(a) PVC hard rubber shoe standard quality fixed with screws on each legs as per drg

(b) Table top made with 18 mm thick MDF board exterior grade (Grade 1 Type-II) ISI marked of Make: Action Tesa / Century Ply / Green Panelmax from Greenply) duly post-formed with 0.6 mm thick laminate in colour or shade as approved by GE with 2 mm thick PVC edging of Make : Rehau / Pegasus / Kynex shall be fixed on two sides fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

(c) MS Flat iron / conduit member of required section fixed with screws as per drg.

Table Steel 900 mm x 600 mm with and with out drawer & Table 900 mm x900 mm FD-1007/1008/1009

(a) Welding wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

(b) Table top of size 900 mm x 600 mm made with 18 mm thick MDF board exterior grade (Grade 1 Type-II) ISI marked of Make: Action Tesa / Century Ply / Green Panelmax from Greenply) duly post-formed with 0.6 mm thick laminate in colour or shade as approved by GE with 2 mm thick PVC edging of Make : Rehau / Pegasus / Kynex shall be fixed on two sides fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

(c) Table top of size 900 mm x 900 mm made with 18 mm thick MDF board exterior grade (Grade 1 Type-II) ISI marked of Make: Action Tesa / Century Ply / Green Panelmax from Greenply) duly post-formed with 0.6 mm thick laminate in colour or shade as approved by GE with 2 mm thick PVC edging of Make : Rehau / Pegasus / Kynex shall be fixed on two sides fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

(d) Repair to drawer by replacing of old u/s parts with new parts including denting, welding etc all as shown on drawing and as directed by Engineer-in-Charg.

(e) PVC hard rubber shoe standard quality fixed with screws on each legs as per drg

(f) Godrej patteren 6 lever lock fixed in drawer stainless steel as per sample of Make : Hettich / Link / EBCO or Godrej as per drg

Chair Steel Tubular with arms [FD-75(m)]

a) Second class Hard wood seat frame including cane work and including two coats enameled painting over a coat primer and putty fitting in position all as per drg

b) Second class Hard wood back frame including cane work and including two coats enameled painting over a coat primer and putty fitting in position all as per drg

(c) PVC Arm rest as directed by EIC

(d) PVC hard rubber shoe standard quality fixed with screws on each legs as per drg

(e ) Rubber cap for conduit pipe as per dwg

(f) Welding wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

Chair Steel Tubular without arms [FD-75(m)]

a) Second class Hard wood seat frame including cane work and including two coats enameled painting over a coat primer and putty fitting in position all as per drg

b) Second class Hard wood back frame including cane work and including two coats enameled painting over a coat primer and putty fitting in position all as per drg

(c) PVC hard rubber shoe standard quality fixed with screws on each legs as per drg

(d ) Rubber cap for conduit pipe as per dwg

(e) Welding wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

Chair Verandah : FD-19, FD-256, FD-359/MAP/11/MAP-II/15

(a) MS Conduit 16 gauge 20 mm dia length as required & welded on required places.

(b) Welding wherever required as directed by Engineer-in-Charge. Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

(c) PVC hard rubber shoe standard quality fixed with screws on each legs as per drg

(d) Removing of old unserviceable cane from chair verandah & recaning the chairs verandh with approved new white colour or as approved colour plastic cane 4 mm wide half round as per Matt Pattern complete all as specified & directed.

Locker Steel : FD-1029/257/SKD-562

(a) CP Handle as per drg

(b) Stainless steel hasp staple of as per exisitng size fixed with screws rest as per drg

(c) Repairs / adjustment to door by denting as required & including replacement of hinges

(d) New Door shutter of locker steel made with 1 mm thick MS sheets including hinges as per size as per drg.

(e) Legs made with 1.00 mm thick MS sheet as per drg

(f) MS chromium plated 19 mm dia conduit with ends bracket fixed with screws as per drg

(g) New shelf of locker steel made with 1 mm thick MS sheets as per drg.

(h) Godrej pattern 6 lever lock stainless steel as per sample of Make : Hettich / Link / EBCO or Godrej as per drg

(i) New mild steel drawer made with 1.0 mm thick sheet of required size & shape complete as per drg.

Charpoy IP Ply Top FD/MAP-II/01

(a) 12 mm thick plywood top BWP grade of Make: Bond 710 from Century Ply / Green Gold ply from Greenply / Platinum Prime from Archid ply as per existing shape and size with 8 Nos shunken nut & bolts of appropriate size hole shall be made with drill machine complete rest all as drg and as directed

(b) Welding of joints wherever required as directed by Engineer-in-Charge. Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

(c) PVC hard rubber shoe standard quality fixed with screws on each legs as per drg

Chair Computer / Revolving TP [FD/E6/MAP/01 &TP]

(a) Taking out old damaged seat & supply & fixing new seat made of 12mm thick hot pressed plywood with fabric poly proplene / acrylic (range of cloths or fabrics not less than Rs. 300.00 per Sqm) and mouled polyurethane foam 40 density of Make sleepwell (Product : primo cool)/ Godrej with PVC lipping all around seat, fixed with clips complete all as shown on drawing.

(b) Ditto ---- all as above but back of chair complete.

(c) PU arms fixed with screws as per drg

(d) Complete pedestal assembly standard quality complete all as per drg & directed.

(e) Supply & fixing new twin wheel castors of required dia fixed with screw in chairs complete as directed.

(f) Supply & fixing new chrome free cylinder tube shall be fixed complete all as per drg and as directed.

(g) Supply & fixing new Locking lever assembely as shown in drawing complete all as directed.

Charpoy GI pipe ply top FD-220

(a) 12 mm thick plywood top BWP grade of Make: Bond 710 from Century Ply / Green Gold ply from Green ply / Platinum Prime from Archid ply as per existing shape and size with 10/12 Nos. sunken nut & bolts of appropriate size hole shall be made with drill machine and painting of charpoy 2 frame complete rest all as drg and as directed

(b) Supply & Fixing mild steel 25mm hollow square tube 200 mm long having 16 gauge thick each welded to GI Charpoy pipe in four corner to support of ply Duly painted complete all as specified and directed.

(c) Supply & Fixing stiffner in replacement of mild steel 25 mm square hollow tube 800mm long having 16 gauge in thickness each welded to GI Charpoy pipe complete all as specified and directed.

(d) Fixed in repairs of long rail made of 32 mm dia medium grade GI pipes threaded at both ends of required numbers of threads, ISI Marked all as specified and shown on drg Make of pipe Jindal / Prakash / TATA complete all as specified and directed.

(e) Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required numbers of threads complete all as specified and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No. 14.04 here-in-before.

f) Replacement of unserviceable Leg from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required numbers of threads and plugged bottom of GI tubing with SAL wood and 25x3 mm flat iron clamp two numbers duly painted with black japan paint welded on legs complete all as specified and directed. Note : Pipe shall be used from unserviceable Long rail /Short rail obtained from item No. 14.04 & 14.05 here-in-before.

g) Material & Labour in replacement of damaged 32 mm dia GI Elbows three ways heavy duty for GI charpoy complete all as specified & directed. Make : Universal make or equivalent make as approved by GE.

h) Material & Labour in replacement of damaged 32 mm dia GI cheknuts heavy duty for charpoy complete all as specified & directed.

(i) Welding of joints wherever required as directed by Engineer-in-Charge. Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

(j) Replacement of old us Nylon newar from charpoy GI pipe, tightening of loose components of complete charpoy and S&F new plywood top 12mm thick BWP grade of Make: Bond 710 from Century Ply / Green Gold ply from Green ply / Platinum Prime from Archid ply duly ISI marked of required size fixed with mild steel galvanished iron nuts and bolts of required size and suitable length, 12mm x 6mm thick 1st class teak wood beading half round along with the edges of the plywood and round at corner fixed with fevicol and headless nails, S&F three stiffeners 900mm long made out of MS flat iron, 40x5mm duly painted with two coat of black colour synthetic enamel paint over a one coat of red oxide primer to be fixed over the long rails by drilling holes in flat iron and long rail by two number of semi circular top of 6mm dia 65mm long nut and bolts. Ten No. nut and bolts with semi circular top of 6mm dia and 65mm long with steel washers to be used (03 Nos at each long rail, 02 Nos at each short rails) and 06 Nos. nuts and bolts with semi circular of 4mm dia and 35mm long with steel washers to be used (02 Nos at each flat iron in between long rail) for fixing of plywood complete all as specified & directed.

Charpoy IP Folding FD : 388(R)

(a) 12 mm thick plywood top BWP grade of Make: Bond 710 from Century Ply / Green Gold ply from Green ply / Platinum Prime from Archid ply as per existing shape and size with 10 Nos shunken nut & bolts of appropriate size hole shall be made with drill machine complete rest all as drg and as directed

(b) Circular pipe/ flat iron as required

(c) PVC hard rubber shoe standard quality fixed with screws on each legs as per drg

(d) Welding of joints wherever required as directed by Engineer-in-Charge. Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

Table Dinning OR A/top

a)Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly fixed with 1mm stainless steel to be fixed as table top all as specified and directed by EIC/GE.

b) Leg/Stiffner/short rail of MS 25mm square tube of 1.6mm thick complete all as specified and directed.

c) Long Rail/middle support complete all as specified and shown on drg and as directed.

Chair Writing FD/E6/MAP/12 & TP

(a) Taking out old damaged seat & supply & fixing new seat made of 12mm thick hot pressed plywood with fabric poly proplene / acrylic (range of cloths or fabrics not less than Rs. 300.00 per Sqm) and mouled polyurethane foam 50 mm thick 50 density of make sleepwell (Product: Prime Cool / Godrej or dunlop) with PVC lipping all around seat complete all as shown on drawing.

(b) Ditto ---- all as above but back of chair complete.

(c) Taking out old damaged arm rest of chair writing & supply & fixing new PU arm rest as per drg.

(d) Preperation of old painted surface by scrapping & rubbing and paintinng of frame two coat synthetic enamel paint complete before fitting of above parts as per drawing or as directed.

(e) Taking out unserviceable / broken frame and Supply & Fixing new cantilever type MS tublar frame powder coated made out of 25 x 10mm secion as per drg.

(f) Welding of joints wherever required as directed by Engineer-in-Charge Note: The quoted rate shell deemed to include for cleaning and preparing the surface to be welded together, holding the member in true position while welding and bevelling of edges as required.

Material & Labour for hammertone paint with shade as approved by GE over a coat of primer through spray machine , both internally & externally for item sl no. 19, 20, 21 & 25 and for rest of item shall be painted two coat of synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts, dents etc and removing of existing paint both internally & externally, applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. Note : Work will be executed in the furniture yard or in different User Units / Md Accns of GE (East) Allahabad including BSO's Furniture Yard as required or directed by Engineer-in-Charge

Almirah Steel Medium [FD-1032 }

Almirah Steel Large [FD-67/351/1031]

Book Case Steel [FD-1028]

Charpoy IP Hard Top [FD/MAP-II/01]

Chair Steel Tubular with and without arms [FD-75(m)]

Chair Verandah [FD-19/256]

Locker Steel [FD-1029/257/127]

Table Office Officer Steel [FD-84/1003]

Table Office Clerk Steel [FD-84 / 381 FD-1004]

Teapoy Verandah FD : 383 / 255

Table 3x2 with and w/o drawer & Table 3'x3' [FD-1007/1008]

Charpoy IP folding [FD-388 (R)]

Rack steel any type / Book Shelf open large [FD-1038 & 1023/69]

Table dinning OR A/top [FD-165(m)]

Rack Shoe Steel [FD- FD/E6/MAP/02]

Trestle Store room Iron [FD- 1043]

(a) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP furniture items carefully without disturbing the adjoining parts and provision of new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing everypart in-tact the including making good the disturbed portion to match with the existing applicable, all as per drgs and as directed. (b) Work shall be executed where the furniture exists in different User Units/Md accns of GE (East) Allahabad including BSO's Furniture Yard. (c) Timber shall be of 1st class teak wood seasoned

FD-55/284/283 or simillar for Table 3'X2' with / without Drawer

Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete, and rest shell be all as per drg.

Legs as per drg

Top long rail as per drg

Top Short rail as per drg

Center Stiffener as directed

Short stiffener as per drg

Drawer made of 18 mm thick pre laminated MDF board Exterior grade of shade as approved by GE with 2 mm thick teakwood beading in front, sides/back shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood (Make: Green Gold from Greenply/ Platinum Prime from Archidply/ Bond 710 from Century ply) complete and rest shell be as per drg.

Fancy Knob CP as per sample held in yard.

Wooden corners

PVC shoe as per sample.

FD-273, 30 or similar type/MAP Drg for Table Dining 4/6/8 Persons

Provision of top for 4 person table 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive on both side all as directed by GE and as per drg with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on all edges with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Provision of Top for 06 pers table 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.8 mm thick laminate in colour/shade as approved by GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine, complete all as specified and as per drg.

All as above but size for 08 Pers.

Wooden corners .

Top long rail as per drg

Top short rail as per drg

Legs as per drg

Stiffener between long rails

PVC shoe as per sample.

FD-33,275, DB-3982 or similar type for Table writing

Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post formed with 0.6 mm thick laminate in colour/shade as approved by GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine, complete all as specified and as per drg.

Legs as per drg

Foot rest as per drg

Stiffener side as per drg

Cabinet box with partition with 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.8 mm thick (Make: Greenply/ Archidply/ Century ply) of shade approved by GE with suitable adhesive on one side and Deco paint to be applied two coats on other side all as directed and as per drg. Back ply shall be 12 mm BWP grade as per drg.

Cabinet door made out of 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.8 mm thick (Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive for both sides all as directed and specified in drg., with and including provn of Lock (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) in Cabinet.

Back ply 12 mm BWP grade as per drg.

Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by GE with suitable adhesive as approved in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete, that runs on and including provn of Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) in Drawers all as directed and specified in drg. Deco paint shall applied in two coats on all surfaces except front of drawers.

PVC shoe as per sample.

Drg No. FD-32,251, DB-3180 for Table Dressing Ladies

Frame assembly along with Mirror 5mm thick (Make-Modiguard/Atul/Saintgobain) & 6 mm thick Back ply BWP grade (Make: Century Ply/ Greenply/ Archidply) as per drg.

Cabinet box with partition with 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.8 mm (Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed and as per drg. Back ply shall be 12 mm BWP grade as per drg.

Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by GE with suitable adhesive as approved in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete, that runs on and including provn of Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) in Drawers all as directed and specified in drg. Deco paint shall applied in two coats on all surfaces except front of drawers.

Plain glass with roller and slider as per drg.

12 mm thick back ply BWP grade of table dressing box as per drg.

Base frame of teak wood as per drg.

Drg No. FD/MAP-II/07 for Stool Dressing with Cushion

Cushion complete with 40 density dunlop , removable type (Make:Sleepwell, Product-Primo Cool/ Godrej) with upholstery of tapestry cloth of range not less than Rs. 450/metre (as per sample kept in BSO ) colour and shade & quality approved by GE.

Legs as per drg.

Top rail as per drg.

Top short rail as per drg

Wooden corners

Drg No. FD-277/ 384, DB-3973 for Peg Table

Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete and rest shall be all as per drg.

Legs as per drg.

Top rail/Bottom Rail rail as per drg.

20x40 mm top short rail

20x40 mm stiffener between bottom rail

PVC shoe as per sample.

Drg No. FD-276/248 for Table Bed Side

6 mm thick back ply BWP grade of table bed side as per drg.

Top/bottom/Shelf made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.8 mm (Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive for both sides all as directed and as per drg.

Sides made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.8 mm (Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive for both sides all as directed by and as per drg.

PVC shoe as per sample.

Drg No. FD-274 / 235 for Table Centre

Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.8 mm thick laminate in colour/shade as approved by GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete and rest all as per drg.

Legs as per drg.

Top rail/stiffener as per drg.

Bottom rail as per drg.

20x50 mm top short rail

20x50 mm stiffener between bottom rail

Wooden corners

PVC shoe as per sample.

Drg No. FD-26/241 for Side Board

Cabinet box complete with vertical and horizental partitions made of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/ Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.8mm (Make: Greenply/ Archidply/ Century ply) of shade approved by GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed and all as per drg. Back ply shall be 12 mm BWP grade as per drg.

Cabinet door made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) over which pasting of sunmica 0.8mm ( Make: Greenply/Archidply/Century ply) of shade approved by GE with suitable adhesive for both sides all as directed and as per drg. SS Piano hinges shall be used for fixing. Lock (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) shell be provided in Cabinet complete all as directed and as per drg.

Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by GE with suitable adhesive as approved by GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Slider on with and including provision of Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 3" (Make: Hettich/Ebco/Quba) shall be provided in Drawers complete all as directed and as per drg. Deco paint shall be applied in two coats on all surfaces except front of drawers.

Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg.

Drg No. FD-278, 34, 382 for Teapoy

Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete and rest all as per drg.

Legs as per drg.

Top rail/stiffener as per drg.

Bottom rail as per drg.

20x50 mm top short rail

20x50 mm stiffener between bottom rail t

Wooden corners

PVC shoe as per sample.

Drg No. FD-246/247 for Bed Ply top

Teak face ply 3.5/4 mm thick on head rest/foot rest (Make- Greenply/Century Ply/Archid Ply), with half round teak wood beading complete as per drg

Long rail as per drg

Ply top 12 mm thick BWP Grade ( Make: Green Gold from Greenply/Platinum Prime from Archidply/ Bond 710 from Century ply) rest complete all as per drg.

Head rest complete as per drg

Foot rest complete as per drg

Stiffner as per drg

Wooden corners

Drg No. FD-281/373/MAP drg for Sofa set 4/5 seater

Legs/side rails as drg

Arms as per drg

Front rails/back rail for Three Seater as per drg

Front rails/back rail for One Seater as per drg

Bearer/Batten as drg

Back frame top/bottom for Three Seater as per drg

Back frame top/bottom/sides for One Seater as per drg

Cushion complete with 40 dennsity PU foam of size 560 X 530 X 110mm (Make:Sleepwell, Product-Primo Cool/ Godrej) with upholstery of tapestry cloth of range not less than Rs. 450/metre (Sample kept in BSO Office) colour and shade & quality and providing a chain of best quality (on either of 21" side) of make YKK with two runners at both ends as approved by GE.

Cushion cover of tapestry cloth of range not less than Rs. 450/mtr quality and providing a chain best quality (at either of 21" side) of make YKK with two runners at both ends as approved by GE.

Drg No. FD-279/16/250 for Chairs Dinning

Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Back strip as per drg

Re-canning of Chair Dining in Godrej pattern with 2 mm wide new white plastic cane and 3mm wide at the edge of make as approved by GE including taking out old canning complete all as specified and directed.

Drg No. FD-285 for Chairs Wooden Bottom

Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Back strip as per drg

Ply wood BWP grade as per drg.

Drg No. FD/MAP-II/04 or similar for Chairs Dining Officers

Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Back strip as per drg

Replacement of unserviceable plywood for seat with new one 12mm thick including provision of PU foam cushion, 40 Density (Make: Sleepwell (Primo Cool)/ Godrej) with Tapestry cloth as approved by GE of rate not less than Rs 450/Metre complete as per Drg and as directed.

Drg No. FD-20,202,250,280 for Chair Writing

Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Arm rest as per drg

Back strip as per drg

Re-canning of Chair writing in Godrej pattern with 2 mm wide new white plastic cane and 3mm wide at the edge of make as approved by GE including taking out old canning complete all as specified and directed.

Drg No. FD-229/ 201/17 for Chair Easy

Rear legs as per drg

Front Leg as per drg.

Seating/back Frame members front, back,side rail as per drg.

Arm rest as per drg.

Re-canning seat of Chair easy in Godrej pattern with 2 mm wide new white plastic cane and 3mm wide at the edge of make as approved by GE including taking out old canning complete all as specified and directed.

Re-canning back of Chair easy in Godrej pattern with 2 mm wide new white plastic cane and 3mm wide at the edge of make as approved by GE including taking out old canning complete all as specified and directed.

TP for Sofa Set 5 Seater

Taking down old cushion and tapestry/rexene and re-upholstery of Sofa complete by tightening of frame with removal of unserviceable wooden parts/legs and S&F new springs best quality/Cushion 50 density (Make:Sleepwell (Cool Gel-S)/ Godrej) and with rexene superior quality as approved by EIC/GE (sample kept in BSO yard) of rate not less than Rs 600/RM all as specified and directed by EIC. Sofa will be fully covered and leg base shall be provided of round steel as approved.

A) M&L for melamine polishing with spray machine after removing of existing polish and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (East) Allahabad including BSO's Furniture Yard as directed by Engineer-in-Charge.

Almirah Medium/large All Types Drg No. DB-3951/4042/ 4047

Bed Plywood Top Drg No. FD-246/247

Chair Dining Drg No. FD-279/16/250

Chair WB Drg No. FD-285

Chair Dining Officers Drg No. FD/MAP-II/04/FD/MAP-II/10

Chair Writing Drg No. FFD-20,202,250,280

Chair easy Drg No. FD-229/ 201/17

Peg table Drg No. FD-284/277/230 DB-3972

Side board Drg No. FD-226/241

Sofa Set 5 seater Drg No. FD-281 /373/258

Table dining 4/6/8 pers Drg No. FD-30/239 /273/139/289

Table 900x600mm with & without Drawer/ Table 900x900 Drg No. FD-42/ 55/ 41/ 223/ 224/ 231/ 284/ 283/ 291/ 293

Table centre Drg No. FD-235/274 DB-3973

Table dressing ladies Drg No. FD-251

Table wrtiting Drg No. FD-275/DB-3982

Teapoy Drg No. FD-232/278/34 DB-4069

Table Bed Side Drg No. FD-276/248

M/s Rajeev Kumar

Supreme Builders