MAINT/REPAIRS TO WOODEN/STEEL FURNITURES ,SOFA,RECANNING OF CHAIRS,VARNISHING,PAINTING AND ALLED WORKS AT AFAC UNDER AGE (I)(AF) COIMBATORE

Amount

The following works for : Chair tubular steel With arm/ with out arms (Refer drawing No.FD-75 (M)

Removing the existing unserviceable broken back & seat frame of tubuler steel chair and supply and fixing new back as pother details areing one made out of Ist class hard wood teak (Tectona Grandis) 1st quality duly painted in Jet black colour and canned as per drawing (Godrej pattern) with 2 mm wide cane for weaving and 4 mm wide for bordering. Canning hole shall be bored at 12.5 mm centre to centre. Back & Seat shall be fixed to frame with bolts and nuts making required holes to frame and steel tubuler (4 nos each).other details all as per drawings and as directed by Engineer -in -charge.

Removing the existing old unserviceable cane of back & seat and reweaving with 2 mm wide white cane for weaving and 4 mm wide for bordering of approved quality plastic cane. Weaving shall be done as per Godrej pattern . other details are all as per drawing and directed by Engineer -in -charge.

Removing the unserviceable portion of MS condiute pipe and supply and fixing through welding new MS pipe 20 mm dia 1.6 mm thick of 10 inch long as existing wherever required other details are all as per drawing and approved by Engineer -in -charge.

Taking out unserviceable hand other details are from Chair tubular steel with arm and S&F new hand other details are of size 45x25mm, 440mm long duly polished matching with the existing hand other details are. other details are all as per drawing and directed by Engineer -in -charge.

The following works for : Chair revolving lab cum computer with or without arm (Refer drawing No.TP)

Taking out unserviceable caster wheel from any type of chair revolving and S&F new caster wheel of different type as per trade pattern matching with the existing shape & size all as approved and directed by Engr-in-Charge

Taking out unserviceable tapestry cloth from seat & back of chair revolving and S&F new tapestry cloth of approved quality & shade including replacement of foam cushion and plywood etc. all as approved and as shown on drawing directed by Engr-in-charge

Taking out unserviceable prang MS/PVC from chair revolving and S&F new prang MS/PVC with wheel matching with the existing shape and size all as approved and directed by Engr-in-charge

Taking out of Hydrualic Assembly from Chair revolving High back/Low back/Med back/Computer and S&F new Hydrualic assembly different type as per trade pattern with the existing shape and size as all as approved and shown on drawing & directed by Engr-in-charge

Taking out unserviceable hand other details are from chair revolving and S&F new hand other details are of different type as per trade pattern matching with the existing hand other details are.all as approved and directed by Engr-in-charge

Taking out unserviceable base form Chair revolving High back/Low back/Med back/Computer and S&F new base different type as per trade pattern (Godrej patten ) with the existing shape and size all as approved and directed by Engr-in-charge

The following works for : Almirah large steel /Med Steel (Refer drawing No.FD-67M/1031/FD-1032)

Removing the unserviceable handle and S&F new MS handle Chromium plated superior quality as approved by Engr -in Charge . Fixing note shall be done as per drg and directed by engineer in charge

Replace the unserviceable locking device complete set and S&F new locking device as per drg with two duplictae keys and directed by engineer in charge

Removing the unserviceable shelves and supply and fix new shelves made out of 1 mm thick MS Sheet as existing. other details are all as per drg and directed by engineer in charge

Repair the door single side wherever unserviceable from Almirah large steel and supply and fix new door made out of 1 mm thick MS sheel as existing . other details are all as per drg and directed by engineer in charge

Repair the door single side wherever unserviceable from Almirah Med Steel and supply and fix new door made out of 1mm thick MS sheel as existing . other details are all as per drg and directed by engineer in charge.

Replace the unserviceable leg and S & F new leg made out 1 mm thick MS sheet as existing. other details are all as per drg and directed by engineer in charge

The following works for : Charpoy GI with plywood top (Refer drawing No.FD-220)

Removing the existing broken long rail and supply and fixing 32mm dia GI Pipe med grade of 1980mm long duly threaded at both ends as shown on drawing make: Jindal /TATA. other details are all as per drg and directed by engineer in charge

Removing the existing broken short rail, cutting and threading for short rails of 900mm long from broken long rails retreved from old charpoy and fixing as shown on drg and directed by engineer in charge.

Removing the existing broken legs, cutting and threading for legs of 440mm long from broken short rails retriieved from old charpoy and fixing as shown of drg and directed by engineer in charge

Supply and fixing check nut suitable for 32mm bore GI pipe, 6mm thick conforming to IS and directed by engineer in charge

Supply and fixing elbow 3 way suitable for 32mm bore GI pipe ISI marked and directed by engineer in charge

The following works for : Bed Hard with Ply Top (Refer drawing No.FD-246)

Taking out unserviceable long rail from Bed Hard with Ply Top and S&F of new long rail made out of seasoned Hard wood of size 1980mmx90mmx35mm complete all as specified and shown in drg and directed by engineer in charge

Taking out unserviceable head side board from Bed Hard with plywood top and S&F of new Head side board made out of 4mm thick one side teak face plywood of Make : Kit Ply/Green Ply duly covered with 6 mm thick teak wood beedings all around complete all as specified and shown in drg and directed by engineer in charge

Taking out unserviceable foot side board from Bed Hard with plywood top and S&F of new foot side board made out of 4mm thick one side teak face plywood of Make : Kit Ply/Green Ply duly covered with 6 mm thick teak wood beedings all around complete all as specified and shown in drg and directed by engineer in charge.

Taking out unserviceable Stiffners from Bed Hard with ply top and S&F of new stiffners made out of seasoned 1st class hard wood of size complete all as specifided and shown in drg and directed by engineer in charge

Taking out unserviceable Supporting clamps from Bed Hard with ply Top and S&F of new MS clamps made out of 65x65x6mmx15mm thick MS flat iron complete including painting two coat over primer all as specified and shown in drg and directed by engineer in charge

Removing the unserviceable lock for the following items and supply and fixing new 6 lever MS lock Make Harrison/Link with duplicate keys. other details are all as per drg and directed by engineer in charge.

Almirah Large Steel (Refer drawing No.FD-67M/FD-1031)

Almirah med Steel (Refer drawing No.FD-1032)

Table office clerk steel (Refer drawing No.FD-64/1003)

Table Office Officer Steel (Refer drawing No.FD-1004)

Taking out unserviceable stiffner and supply & fixing of new stiffner including painting the stiffner with 2 coats of synthentic enamel black paint over a coat of red oxide. Stiffner should be welded and size for the following items all as directed by Engineer in charge.

Charpoy GI with plywood top(MS Tee angle iron of size 25mm x 6mm x 25mm and 90cm long) (Refer drawing No.FD-220)

Charpoy IP Hard top (stiffner of size of size 75 x 75 mmx90cm long 16 gauge MS Tube) (Refer drawing No.FD/MAP-II/01)

Removing the unserviceable plywood and supply and fixing new commercial plywod of size 12mm thick ISI Marked of Make Kitply/greenply century and size for the following items directed by engineer in charge

Charpoy GI with plywood top (Refer drawing No.FD-220)

Bed Hard with plywood top (Refer drawing No.FD-246)

Charpoy IP Hard top (Refer drawing No.FD-MAP-II/01)

Preparing the old painted steel surfaces by sand papering , removing dents and bents ,filling with steel putty and spray painting with 2 coats of synthetic enamel Olive Green/black/white Paint to give glossy finish over a coat of primer.other details are all as per drawing for the following items and directed by Engineer -in -charge.

Chair tubular steel without arms (Refer drawing No.FD-75(M) )

Table office clerk steel/Table office officers steel (Refer drawing No.FD-1004)

Almirah large steel (Refer drawing No.FD-67M/1031)

Almirah medium steel (Refer drawing No.FD-1032)

Charpoy IP Hard Top (Refer drawing No.FD/MAP-II/01)

Chair Verandah (Refer drawing No.FD-19/256)

Taking out unserviceable foam cushion seat and back from sofa set and supply new foam cushion seat and back 32 density size 530 x 500 x 100 mm thick Make : Sleepwell /Cool foam duly covered with tapestry cloth with zip lock as approved by Engineer in charge. (01 set is 02 nos.) All as specified and shown in drg FD-281/373

Taking out unserviceable foam cushion seat and back from chair dining long back size complete all as specified and shown in drg and directed by engineer in charge All as specified and shown in drg FD-FD-357

Taking out unserviceable top/bottom/Front/back/side/shelves and S&F New top/bottom/front/back/ side/shelves made of pre laminated particale board one side teak face exterior grade duly provided with 6mm thick teak wood beading all around the top complete all as specified and shown in drg for the following items and directed by engineer in charge.

Tabele 900 x 600 mm with drawer (Refer drawing No.FD-41M,224)

Table Center (Refer drawing No.FD-29,235,274)

Teapoy (Refer drawing No.FD-232,34 (M)

Table Peg (Refer drawing No.FD-236,277 &25)

Table dining 6 Persons (Refer drawing No.FD-273 & 30M)

Table Dining 8 pers (Refer drawing No. FD-30M)

Table bed side (Refer drawing No. FD-276,248 & 58)

Table dressing gents (Refer drawing No. FD-230,31M)

Table dressing ladies (Refer drawing No. FD-378,31M)

Taking Out unserviceable looking mirror from Table dressing and S&F new looking mirror Make : Saint gobin/Modiguard /goldenfinish free from distortion and other defect duly framed with backing plywood teak wood beading & vertical support etc. all as shown in drg and directed by engineer in charge for the following items

Table dressing ladies (looking mirror of size 5.5mm thick 366x1220mm) (Refer drawing No.FD-378,31M)

Table dressing Gents (looking mirror of size 5.5mm thick .size complete all as specified and shown in drg and directed by Engineer in charge (Refer drawing No.FD -230,379)

Table dressing gents (looking mirror 5.5mm thick of size 380 x 760 mm) (Refer drawing No.FD -230,379)

Taking out unserviceable drawer from table dressing and S&F new drawers made of 12mm thick teak wood except bottom of drawer which shall be of 6mm thick ply wood commercial exterior grade make National /kit ply/century & front of drawer shall be made of 12 mm thick pre-laminated particle board one side teak face exterior grade including knob etc. all as shown in drg and directed by Enigneer in charge for the following items

Table dressing ladies (Refer drawing No.FD-378,31M)

Table dressing gents (Refer drawing No.FD-230,31M)

Table 900 x 600mm with drawer (Refer drawing No.FD-41M,224)

Taking out unserviceable Front/rear leg/ Front/back/side rail/hand/back other details are and stiffner from chair and S&F new Front/rear leg/ Front/back/side rail hand/back other details are and stiffne made of seasoned teak wood 1st class matching with the existing shape & size complete all as specified and shown in drg and directed by engineer in charge.for the following items

Chair dining (Refer drawing No.FD-278&228)

Chair Easy (Refer drawing No.FD-229)

Chair Writing (Refer drawing No.FD-20,202, 280)

Chair dining long back (Refer drawing No.FD-357)

M&L for scratching existing polish filling the cracks with wax making the surface smooth and M&L for polishing with spirit poliosh complete 3 coats as directed by the Engr-in-charge..

Table Center (Refer drawing No.FD-29,235, 274)

Bed Hard with Ply Top (Refer drawing No.FD-246)

Table 900x600x760mm with drawer (Refer drawing No.FD-41M,224)

Teapoy (Refer drawing No.FD-232,278, 34)

Table peg (Refer drawing No.FD-236,277 &25)

Table Dining 6 pers (Refer drawing No.FD-273 & 30M)

Table Dining 8 pers (Refer drawing No.FD-30M)

Table dressing gents with mirror (Refer drawing No.FD-230,31M)

Table dressing ladies with Mirror (Refer drawing No.FD-378,31M)

Chair dining (Refer drawing No.FD-278&228)

Chair writing (Refer drawing No.FD-229)

Chair Easy (Refer drawing No.FD-280,250)

Chair dining with long back cushion (Refer drawing No.FD-357)

Sofa Set five seater (Refer drawing No.FD-281/373)

Sofa set Single seater (Refer drawing No.FD-281)

Taking out unserviceable cane from chairs and then cleaning the holes for re canning and supply & re-canning with new half round cane 2 mm for weaving as 4mm forn boarering wide superior quality ISI Marked color as approved by Engr-in-charge. Viewing shall be as per godrej pattern complete all as specifieid shown in drg and directed by Engr-in-charge for the following items

Chair dining (Refer drawing No.FD-278&228)

Chair writing (Refer drawing No.FD-229)

Chair Easy (Refer drawing No.FD-280,250)

Chair Verandah (Refer drawing No.FD-19/256)

Taking out unserviceable plastic seat of chair dining Map (wide) superior quality ISI Marked color as approved by Engr-in-charge. pattern complete all as specifieid in drg and directed by Engr-in-charge(Refer drawing No FD-MAP-11/05)

Fixing /Replacing of 'L' brackets iron 75mmx75mmx3mm in wooden furniture Chair dining /chair writing /Chair dining long back /peg table/Teapoy/center table

Removing unsv bush/shoes/knobs/toes completely and supply and fixing of new bush/shoe/toes/knobs of hard PVC. all as specified in drg and directed by the Engr-in-charge.for thr following items

Chair dining

Chair Easy

Chair Verandah

Chair Writing

Chair tubular steel With arms

Charpoy GI With plywood top

Table office Officer steel

Chair dining with long back cushion

Table office clerk steel

SHANMUGA TRADERS

eurekaenterprises

KASTURILAL HARICHAND OHRI AND SONS

p.chinnasamy

M/s Shana Constructions