GE/U(N)-79/2020-21 PROVN OF GEYSER IN BLDG NO NP-11 NP-29 P-41 OF WIRELESS UNIT AND BLDG NO P-7 AND P-8 OF AT BN INCLU SPL REPAIR TO BLDG NO NP-6 ALONGWITH PROVN OF RETAINING WALL AT 57 WEU AND DDG SI (NZ) UNDER AGE E/M AND AGE BR-II OF GE NOARTH UDH

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as as specified and directed by Engr-in-charge.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises, all as specified.

Dismantling of CGI/ AC sheet of any description incl ridges etc all as specified & directed by Engr-In-Charge.

Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc complete all as as specified and directed by Engr-in-charge.

15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as as specified and directed by Engr-in-charge.

15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as as specified and directed by Engr-in-charge.

Rendering 5mm thick in cm 1:3 on ceiling finished even & smooth W/O using extra cement complete all as as specified and directed by Engr-in-charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified.

All as per item above but exceeding 1.5 Sqm and not exc 4 Sqm each.

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified

Factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

All as per item above but glazed and skeleton shutter with sash bar for glass / wire gauge complete all as as specified and directed by Engr-in-charge.

Providing Plain cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

Factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings.

Factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0

Providing and fixing 30mm thick factory made PVC door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as as specified and directed by Engr-in-charge.

3mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as as specified and directed by Engr-in-charge.

Preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Preparation of old wooden painted surfaces as exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as as specified and directed by Engr-in-charge.

Preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified.

75mm long butt hings medium weight cold rolled mild steel with Brass screws complete all as as specified and directed by Engr-in-charge.

Aluminum anodised bolts barrels tower bolts with bright both 100mm long

S&F Alunminium handle cast type 150mm long oval type complete all as as specified and directed by Engr-in-charge.

Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250mm complete all as as specified and directed by Engr-in-charge.

Mild steel barrel tower bolts stove enameled black with bright both 150 mm long complete all as as specified and directed by Engr-in-charge.

Mild steel pressed handle 150mm long oval type stove enameled black complete all as as specified and directed by Engr-in-charge.

Mild steel sliding door bolt 300mm long plate type stove enamel black with bright bolt n.less than 12mm dia with and including minium 6 bolts and nuts four on staple plate complete all as as specified and directed by Engr-in-charge.

Galvanized mild steel wire cloth 0.56mm normal dia of wire and average width of apparatus 1.18mm and fixed width tinned lacks of galvanized wire staple complete all as as specified and directed by Engr-in-charge.

150mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel) complete all as as specified and directed by Engr-in-charge.

In repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S' trap complete all as as specified and directed by Engr-in-charge.

In repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450mm long complete all as as specified and directed by Engr-in-charge.

PVC connection 15mm size with PTMT nuts of length 450mm complete all as as specified and directed by Engr-in-charge

25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.including bedding layaers of CM 1:4 (15mm thick) complete all as as specified and directed by Engr-in-charge.

Glazed ceramic tiles (coloured) on vertical surfaces 450x300x6 to 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match. complete all as as specified and directed by Engr-in-charge.

Non-skid Joint free ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exeeding .18 sqm but n.exc 0.36 sqm on floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick bedding layaers of CM 1:4

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified & directed by Engr-In-Charge.

Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified & directed by Engr-In-Charge.

Preparation new decorated surfaces of walls surfaces and applying two coat of cement base paint over one coat of wall care putty over one coat of cement primer all as specified.

Preparation old decorated surfaces of walls including all cornices, pillasters etc by removing the existing decorative treatment completely including washing, rubbing down and stopping the distempered and painted surfaces and applying two coat of cement base paint over onecoat of wall care putty all as specified.

Preparation of old decorated plastered or unplastered surfaces of walls, conices etc by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash all as specified.

Description all as per srl item No.above here in before but on ceiling surfaces.

Preparation of new decorated plastered or unplastered surfaces of walls and applying three coat of white wash all as specified.

Description all as per srl item No.above here in before but on ceiling surfaces complete all as as specified and directed by Engr-in-charge.

Preparing newly plastered surfaces of walls and applying two coat of oil bound distemper over one coat of birla wall care putty all as specified .

Viterous china wash basin, white flat back size 550 x 400mm incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP getting with holes complete all as specified and directed by Engr-in-Chare.

Pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm complete all as specified.

Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over 50mm thick sand cushion all as specified.

Plain Cement Concrete 1:2:4type B-2 as in floors 50 mm thick complete all as directed & specified by Engr-In-Charge.

In repair Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 500 Ltr complete all as as specified and directed by Engr-in-charge.

Ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed complete all as as specified and directed by Engr-in-charge.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm dia complete all as as specified and directed by Engr-in-charge.

15mm Bib taps, cast copper alloy, fency type chromium plated, with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as as specified and directed by Engr-in-charge.

Chromium plated shower rose fancy type 125mm dia, swivel type suitble for 15mm bore fitting complete all as specified.

15mm angle valves (chromium plated) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repair complete all as as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm/20mm dia complete all as as specified and directed by Engr-in-charge.

Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore all as specified.

Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore all as specified.

Priming the roof surface with bitumenous primer @ 0.3 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm all as specified and as directed by Engr-in Charge.

Apply two coats of aluminium paint on roof complete all as specifiecd and as directed.

Excavating in trenches in any type of soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out inany type of soil complete all as as specified and directed by Engr-in-charge.

Excavation over areas not exc 1.5 m depth for foundation in any type of soil, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed by Engr-in-Charge.

Removing excavated material to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point,returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed by Engr-in-Charge.

PCC type D-2 (1:4:8), using 40 mm graded crushed stone aggregates as in filling & mass concrete, complete all as specified and directed by Engineer-in-Charge.

Walling of random rubble, uncoursed, well bonded, bedded and solidly herarted, build in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Providing precast concrete Type 'C' 1:3:6 using 20mm graded crushed stone agregate as in bond stones setting in cement mortar 1.6 complete all as specified and directed by Engr-in-Charge

Plain Cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in coping/cills including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete 1:3:6 type C1 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as as specified and directed by Engr-in-charge.

Plain cement concrete 1:2:4 type B1 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as as specified and directed by Engr-in-charge.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses n. exc 40mm granite or trap stone complete all as specified and directed by Engineer-in-Charge.

Boulder filling dry, hand packed tightly, as in etaining wall (Boulders exc. 150mm size and over), watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall as in weep holes complete all as specified and directed by Engineer-in-Charge.

Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:4) with old size bricks complete all as as specified and directed by Engr-in-charge.

Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) as on walls complete all as per specified and directed.

Supply and install geyser 50 Ltrs capacity Vertical type BEE5 star rating suitable to operate in Single phase AC supply,230 volts 50 Hz including and grouting fashner with suitable size on the wall as per site requirment complete all as as specified and directed by Engr-in-charge.

Point wiring with 2x 2.5 sqmm PVC insulated unsheathed FRLS cable with multistaranded copper conductor anodised sunken boxs in and incl nonmetallic rigid PVC grade ISI marked PVC concealed conduit wiring with vailedC/ML No with all accessories for one 15 Amp socket ion indepenent board with thickness not less than 1.25mm MS terminal boxes concealed on wall with and including 3mm thick laminated backlite sheet including 2.5sqmm PVC insulated unsheathed FRLS cable with multistranded copper conductor continuous earth wire connected to common earth and duly complete all as directed by Engineer-in-charge..

Socket Out let multipurpose, 3 Pin, 5/15 Amp flush type universal complete all as as specified and directed by Engr-in-charge.

Switchpiano flush type single pole one way 15 Amp all as specified and directed by engineer in charge

Material and labour for lying GI Tubing heavy grade including fitting/ fixtures like Elbow, Tee, Bend, Union, socket, Nipple, sintex nipple including cutting as per site requirement etc connecting with existing water mains of following size all as specified and directed by engineer in charge. (a) 15 mm dia bore

(b) 20 mm dia bore

(C) 25 mm dia bore

Material and labour for fixing Chrome plated globe/gate valve with handle screwed down suitable to fix on GI Pipe of following size all as specified and directed. (a) 20 mm dia bore

Material and labour for fixing Chrome plated Bib tap with butter fly handle screwed down suitable to fix on GI Pipe 15 mm dia bore all as specified and directed.

Material and labour for fixing Chrome plated angle valve fancy type handle screwed down suitable to fix on GI Pipe 15 mm dia bore all as specified and directed.

Material and labour for PVC Hot and cold pipe with Check nuts and washer 600 mm long all as directed

In replacement for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement and direction by EIC, all accessories complete all as specified and directed.

In replacement single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 4 ways complete all as as specified and directed by Engr-in-charge.

In replacement single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 08 ways complete all as as specified and directed by Engr-in-charge.

In replacement 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc. complete all as as specified and directed by Engr-in-charge.

In replacement 'C' series SPN MCB 40 to 63Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc. complete all as as specified and directed by Engr-in-charge.

Earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below Normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following (a) Test point GI wire 4mm dia . (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.

RAMAN KUMAR

KUMAR CONSTRUCTION CO

R K BUILDERS

VARDHMAN INTERNATIONAL