CONSTRUCTION OF TECH INFRA AND ALLIED SERVICES AT BIKANER and MFFR UNDER GE P BIKANER PHASE II OF II PHASES ON EPC MODE

Engineering, procurement and construction of infrastructure work as listed in Schedule 'A' section-I(Srl item No. 1, 2, 11 & 12) complete as detailed in scope of work including internal water supply & internal electrification work, DBR and other documents of the tender complete as specified and directed.

Engineering, procurement and construction of infrastructure work as listed in Schedule 'A' section-I(srl item No. 3 to 10 & 13 to 75) complete as detailed in scope of work including internal water supply & internal electrification work, DBR and other documents of the tender complete as specified and directed.

Construction of RCC Blastpen with Traverse wall (Blast pen size 40X25m Ht=8 m) with permanent specification, frame structure, ATT, RCC roof etc

Demolition of Buildings (B/R & E/M Portion) Schedule ‘A’ Section -II (Part-I) excluding Schedule of Credit Section -II (Part-II) i.e (4213522.29-1590703.60)= 2622818.69

Lump sum price worked out by the tenderer for “SITE CLEARANCE AND DEVELOPMENT WORKS" as listed in Schedule ‘A’ Section III Part - I

Lump sum price worked out by the tenderer for “EARTH WORKS" as listed in Schedule ‘A’ Section III Part -II

Lump sum price worked out by the tenderer for “LIGHTENING PROTECTION WORKS" as listed in Schedule ‘A’ Section IV (Part- I)

Supply and fixing alumimium gutka 40mm dia having internal threaded 12 mm dia and external of 40mm dia and fixed on GI socked complete all as specified and directed .

Supply, installation, testing and commissioning of maintenance free earth grid (Grounding) of interconnected two earth electrode of size 85 mm dia x 3 mtr long each metal conductor of electrode shall be Cu bounded MS strip of 50x6 mm Cu bounding of MS rod/ strip should be Min 250 microns. Earth electrode of 85 mm, depth 3 mtr shall be placed augured bore hole and embadding of interconnected strip shall be cast in high purity electrically conductive granuler material having ultra low resistive value 0.001Ohm-m resulting in increase of the effective surface area of the earth grid to lower the earth resistance conductive earth enhancing material shall be mix with cement in the ratio 3:1 which should not leach chemicals into the asjacent soil or underground water channels and should be in pH neutral range. Earth enhancing material should permanently proted the encased metal components of the earthing system. All hardware like nuts, bolts and washers should be of stainless steel Electrode should withstand fault current upto 35 KA for 1 second, electrodes top terminal be sealed permanently packed with conductive concrete and test link of Cu bonded MS/Copper strip of size 50x6x200 mm shall be taken out to connect the equipment. Test certificate of NABL laboratory shall be submitted by the contractor, RCC pit cover including brazzing of all the joints upto the test point complete all as specified and directed. No pre cast electrodes to be used. Make:- Elancrete/ Vasconite/ Equivalent. Note:-1) Test certificate of earthing material from materail from certified NABL laboratory shall be submitted & verified by GE. 2) Test reports should not be more than 5 years old. 3) Test report for fault currect ohms, compliance, resistivity value from NABL certified/CPRI lab is must & it has to be verified by GE.