REPAIR/MAINT TO EXTERNAL WATER SUPPLY VIZ CI, DI, GI PIPE LINES INCLUDING CONNECTED ITEMS AT MIL STN FAZILKA

Amount

Rough excavation n exc 1.5m deep and getting out in soft / loose soil all as specified and directed by Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers of soft / loose soil not exceeding 25cm thick all as specified and directed by Engineer - in - Charge.

Removal of excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed by Engineer - in - Charge.

M & L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work etc. all as specified and directed by Engineer - in - Charge .

M & L cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work etc. all as specified and directed by Engineer - in - Charge .

S & F mild steel work as in Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc., and similar articles conforming to Fe-290 Gde E-165 all as specified and directed by Engineer - in - Charge.

M & L for Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, 80mm bore ,in any length, laid in trenches all as specified and directed by Engineer - in - Charge. .

M & L for Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, 100mm bore ,in any length, laid in trenches all as specified and directed by Engineer - in - Charge. .

M & L for Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, 150mm bore ,in any length, laid in trenches all as specified and directed by Engineer - in - Charge. .

M & L for Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, 250mm bore ,in any length, laid in trenches all as specified and directed by Engineer - in - Charge.

M & L for cast iron Fittings for spigot and socket pipes such as bends (any type, radius and angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, ‘Y’ junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore pipes all as specified and as directed by Engineer-in-Charge.

M & L for cast iron Fittings for spigot and socket pipes such as bends (any type, radius and angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, ‘Y’ junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs for 200mm to 300mm bore pipes all as specified and as directed by Engineer-in-Charge.

Run lead joint suitable for 75/80mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Run lead joint suitable for 100mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Run lead joint suitable for 150mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Run lead joint suitable for 250mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Taking up cast iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead 150mm bore complete all as specified and directed by Engineer - in – Charge.

Taking up cast iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead 250mm bore complete all as specified and directed by Engineer - in – Charge.

Taking up cast iron water mains (including all fittings) with spigot and socket ends and rubber gasket joints 80mm bore complete all as specified and directed by Engineer - in – Charge.

Taking up cast iron water mains (including all fittings) with spigot and socket ends and rubber gasket joints 100mm bore complete all as specified and directed by Engineer - in – Charge.

Burning out lead joint in position, including removing old lead to store, etc for 250mm bore of pipes complete all as specified and as directed by Engineer-in-Charge.

Burning out lead joint in position, including removing old lead to store, etc for 150mm bore of pipes complete all as specified and as directed by Engineer-in-Charge.

Burning out lead joint in position, including removing old lead to store, etc for 100mm bore of pipes complete all as specified and as directed by Engineer-in-Charge.

Burning out lead joint in position, including removing old lead to store, etc for 80mm bore of pipes complete all as specified and as directed by Engineer-in-Charge.

Repacking stuffing box of sluice valve spindle including taking apart and reassembling for 80mm bore complete all as specified and as directed by Engineer-in-Charge.

Repacking stuffing box of sluice valve spindle including taking apart and reassembling for 100mm bore complete all as specified and as directed by Engineer-in-Charge.

Repacking stuffing box of sluice valve spindle including taking apart and reassembling for 150mm bore complete all as specified and as directed by Engineer-in-Charge.

Repacking stuffing box of sluice valve spindle including taking apart and reassembling for 200mm bore complete all as specified and as directed by Engineer-in-Charge.

Taking out sluice valves, refacing, regrinding and refixing for 80mm bore complete all as specified and as directed by Engineer-in-Charge.

Taking out sluice valves, refacing, regrinding and refixing for 100mm bore complete all as specified and as directed by Engineer-in-Charge.

Taking out sluice valves, refacing, regrinding and refixing for 150mm bore complete all as specified and as directed by Engineer-in-Charge.

Taking out sluice valves, refacing, regrinding and refixing for 200mm bore complete all as specified and as directed by Engineer-in-Charge.

S & F 15mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .

S & F 20mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .

S & F 25mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .

S & F 40mm bore medium grade steel tubes galvanised with all fittings laid in trenches all as specified and directed by Engineer - in – Charge .

S & F 50mm bore medium grade steel tubes galvanized with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .

S & F 80mm bore medium grade steel tubes galvanized with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .

S & F 100mm bore medium grade steel tubes galvanized with all fittings laid in trenches all as specified and directed by Engineer - in - Charge .

Taking down steel tubing 15mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 20mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 25 or 32mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 40 or 50mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Cutting existing 20mm bore tubing for alteration or addition complete all as specified and as directed by Engineer-in-Charge.

Cutting existing 25 or 32mm bore tubing for alteration or addition complete all as specified and as directed by Engineer-in-Charge.

Cutting existing 40 or 50mm bore tubing for alteration or addition complete all as specified and as directed by Engineer-in-Charge.

Screwing existing 20mm bore tubing for alteration or addition (or lengthening screw on pipe to form connector) complete all as specified and as directed by Engineer-in-Charge.

Screwing existing 25 or 32mm bore tubing for alteration or addition (or lengthening screw on pipe to form connector) complete all as specified and as directed by Engineer-in-Charge.

Screwing existing 40 or 50mm bore tubing for alteration or addition (or lengthening screw on pipe to form connector) complete all as specified and as directed by Engineer-in-Charge.

S & F rotational moulded polythene water storage tanks, white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .

S & F rotational moulded polythene water storage tanks, white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge .

S & F BRASS type gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 50mm bore complete all as specified and directed by Engineer – in – Charge.

S & F BRASS type gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 40mm bore complete all as specified and directed by Engineer – in – Charge.

S & F BRASS type gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 25mm bore complete all as specified and directed by Engineer – in – Charge.

S & F BRASS type gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 20mm bore complete all as specified and directed by Engineer – in – Charge.

S & F BRASS type gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 15mm bore complete all as specified and directed by Engineer – in – Charge.

Supplying and fixing as in repairs sluice valve flanged type rating PN 1.6 size 150mm bore conforming to IS14846 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Supplying and fixing as in repairs sluice valve flanged type rating PN 1.6 size 100mm bore conforming to IS14846 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Supplying and fixing as in repairs sluice valve flanged type rating PN 1.6 size 80mm bore conforming to IS14846 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Supplying and fixing non -return sluice valve (reflux) flanged type rating PN 1.6 size 80mm bore conforming to IS 5312 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Supplying and fixing non -return sluice valve (reflux) valve flanged type rating PN 1.6 size 100mm bore conforming to IS 5312 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Supplying and fixing reflux (Non -return) valve flanged type rating PN 1.6 size 150mm bore conforming to IS 5312 with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

M&L for drilling & tapping cast iron water main pipe for branch connections of the internal dia 15mm bore pipe complete all as specified & directed by Engineer-in-charge.

M&L for drilling & tapping cast iron water main pipe for branch connections of the internal dia 20mm bore pipe complete all as specified & directed by Engineer-in-charge.

Dismantling and taking out old NRV of size 150mm bore complete all as specified and directed.

Dismantling and taking out old NRV of size 100mm bore complete all as specified and directed.

Dismantling and taking out old NRV of size 80mm bore complete all as specified and directed.

Supply, laying jointing, commissioning and testing Ductile iron pipe with spigot and socket end centrifugally cast(spun) class K-7 of size 150mm dia conforming to IS-8329-2K(ISI Marked) in any length laid in trenches suitable for rubber push on tyton joints complete all as specified and directed. Make : Electro steel Casting/Jindal Saw pipe/ Jai Balaji industries ltd

Supply, laying jointing, commissioning and testing Ductile iron pipe with spigot and socket end centrifugally cast(spun) class K-7 of size 100mm dia conforming to IS-8329-2K(ISI Marked) in any length laid in trenches suitable for rubber push on tyton joints complete all as specified and directed. Make : Electro steel Casting/Jindal Saw pipe/ Jai Balaji industries ltd

S&F as in replacement gland packing of sluice valve for 200mm bore complete as as specified and directed by Engineer-in-charge

S&F as in replacement seat ring of sluice valve for 200mm bore complete all as specified and directed by Engineer-in-charge

S&F as in replacement seat ring of sluice valve for 150mm bore complete all as specified and directed by Engineer-in-charge

S&F as in replacement seat ring of sluice valve for 100mm bore complete all as specified and directed by Engineer-in-charge

S&F as in replacement seat ring of sluice valve for 80mm bore complete all as specified and directed by Engineer-in-charge

Supply only Gland Dori of size 6 mm rex type ri 612 pure carbon with graphite packing with non oxidizing content having pressure 80 bar with ph 6 to 8 and temperature upto 300 degree centigrade

Supply only Gland Dori of size 8 mm rex type ri 612 pure carbon with graphite packing with non oxidizing content having pressure 80 bar with ph 6 to 8 and temperature upto 300 degree centigrade

Supply only Gland Dori of size 10 mm rex type ri 612 pure carbon with graphite packing with non oxidizing content having pressure 80 bar with ph 6 to 8 and temperature upto 300 degree centigrade

Supply only Gland Dori of size 12 mm rex type ri 612 pure carbon with graphite packing with non oxidizing content having pressure 80 bar with ph 6 to 8 and temperature upto 300 degree centigrade

S&F GI Union for 50mm bore tubing medium grade complete all as specified and directed by Engineer-in-charge. Make : Jindal/Prakash/Swastik

all as item No. 79 here in before but of size 15 mm

all as item No. 79 here in before but of size 20 mm

all as item No. 79 here in before but of size 25 mm

all as item No. 79 here in before but of size 40 mm

S&F GI socket for 50mm bore tubing medium grade complete all as specified and directed by Engineer-in-Charge. Make : Jindal/Prakash/Swastik

All as item No. 80 here in before but of size 15 mm

All as item No. 80 here in before but of size 20 mm

All as item No. 80 here in before but of size 25 mm

CAST IRON FLANGE joint in pair of different sizes

80mm of internal diameter

100mm of internal diameter

150mm of internal diameter

S&F GI nipple for 50mm bore tubing medium grade complete all as specified and directed by Engineer-in-Charge. Make : Jindal/Prakash/Swastik

all as item No. 92 here in before but of size 15 mm

all as item No. 92 here in before but of size 20 mm

all as item No. 92 here in before but of size 25 mm

all as item No. 92 here in before but of size 40 mm

S&F Brass Elbow for 50mm bore tubing medium grade complete all as specified and directed by Engineer-in-Charge. Make : Jindal/Prakash/Swastik

all as item No. 97 here in before but of size 15 mm

all as item No. 97 here in before but of size 20 mm

all as item No. 97 here in before but of size 25 mm

all as item No. 97 here in before but of size 40 mm

S&F GI Tee for 50mm bore tubing medium grade complete all as specified and directed by Engineer-in-Charge. Make : Jindal/Prakash/Swastik

all as item No. 102 here in before but of size 15 mm

all as item No. 102 here in before but of size 20 mm

all as item No. 102 here in before but of size 25 mm

all as item No. 102 here in before but of size 40 mm

S&F CI Bends for 80mm bore tubing medium grade complete all as specified and directed by Engineer-in-Charge. Make : Jindal/Prakash/Swastik

all as item No. 107 here in before but of size 100 mm

all as item No. 107 here in before but of size 150 mm

S&F Bib taps, cast copper alloy with crutch or Butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge. Make : Gem/Seiko/Zoloto/JAYPEE

20mm size

25mm size

Supply only Electric wire rope hoist motor chain pulley system with capacity 1.5 ton certified with ISO 9001 with automatic double pawl breaking system with symmetrical arrayed high speed synchronous gear made with standard steel having high strength chain alloy steel hook with motorized trolley and pendant control with lightweight and durable waterproof switch complete all as specified and dir by Engr-in-Charge.

Supply only trolley mounted IC Engine centrifugal Pumping sets with motor, of capacity 5 HP inclusive of starter with 100 mm flexible suction pipe and delivery pipe complete all as specified with fully satisfaction of Engr-in-Charge.

Supplying and fixing in replacement RO membrane to deliver for 1000 litre per hour output of treated water 8040 element, designed pressure of 600 psi incl testing after completion and taking out old unserviceable membrane complete all as specified and directed by Engineer-in-Charge. Make : Hydronautic/Dow/Koch U.S.A

Supplying and fixing in replacement RO membrane to deliver for 1500 litre per hour output of treated water 8040 element, designed pressure of 600 psi incl testing after completion and taking out old unserviceable membrane complete all as specified and directed by Engineer-in-Charge. Make : Hydronautic/Dow/Koch U.S.A

Supplying and fixing in replacement RO membrane to deliver for 2000 litre per hour output of treated water 8040 element, designed pressure of 600 psi incl testing after completion and taking out old unserviceable membrane complete all as specified and directed by Engineer-in-Charge. Make : Hydronautic/Dow/Koch U.S.A

Supplying and fixing in replacement RO membrane to deliver for 3000 litre per hour output of treated water 8040 element, designed pressure of 600 psi incl testing after completion and taking out old unserviceable membrane complete all as specified and directed by Engineer-in-Charge. Make : Hydronautic/Dow/Koch U.S.A

Supply and fixing in replacement of ultraviolet tube model AP-30 etc complete all as specified and directed by Engineer-in-charge. Make : Philips/TATA/Alpha or equivalent as approved by GE

Supply and fixing in replacement of contactor MN-5 etc complete as specified and as directed by Engineer-in-charge. Make : TATA/Alpha or equivalent as approved by GE

Supplying and applying media porous sand quartz of different size to meet raw water requirement for pressure sand filter complete all as specified and directed by Engineer-in-charge. Make : Chloromax/AQUA/ Thermax Limited/ION EXCHANGE

Supplying and applying activated carbon filter media initially charged of 800 Iodine value to meet raw water requirement complete all as recommended by manufacturer and as specified and directed by Engineer-in-charge. Make : Chloromax/AQUA/ Thermax Limited/ ION EXCHANGE

Disconnecting electric connections, dismantling/taking up light vertical high pressure pump (15 stage) discharge 6m3/hour, head 140, 2250 rpm, suitable for RO plant, from existing foundation, removing to workshop for replacement of parts and other repairs like welding, grinding, turning, facing, greasing and reassembling the motor with pumping set, bringing back to installation and fixing to its original position and making electric connections. Note :- The spare parts replaced, will be measured and paid for separately items as supply only here-in-after and the labour element is included in this item

Supply only bronze impellers with key to match with multi stage pumping set (15 stage)

Supply only diffusers to match with multi stage pumping set (15 stage)

Supply only Sealing kit to match with multi stage pumping set (15 stage)

Supply only Bearing as per existing size and make to match with multi stage pumping set (15 stage)

Supply only Bronze bush set of two to match with multi stage pumping set (15 stage)

Supply only Pump shaft duly heat treated, ground & polished to match with multi stage pumping set (15 stage)

Disconnecting electric connections, dismantling/taking up light vertical high pressure pump (12 stage) discharge 6m3/hour,head 120, 2450 rpm, suitable for RO plant, from existing foundation, removing to workshop for replacement of parts and other repairs like welding, grinding, turning, facing, testing the motor on full load complete all as specified and directed by Engineer-in-charge. Note : The spare parts replaced, will be measured and paid for separately under respective items as supply only here-in-after and the labour element is included in this item. Make : Bosch/Hi-Tech/Tata

Supply only bronze impellers with key to match with multi stage pumping set (12 stage)

Supply only diffusers to match with multi stage pumping set (12 stage)

Supply only Sealing kit to match with multi stage pumping set (12 stage)

Supply only Bearing as per existing size and make to match with multi stage pumping set (12 stage)

Supply only Bronze bush set of two to match with multi stage pumping set (12 stage)

Disconnecting electric connections, dismantling/taking up light vertical high pressure pump (10 stage) discharge 6m3/hour,head 105, 2650 rpm, suitable for RO plant, from existing foundation, removing to workshop for replacement of parts and other repairs like welding, grinding, turning, facing, testing the motor on full load complete all as specified and directed by Engineer-in-charge. Note : The spare parts replaced, will be measured and paid for separately under respective items as supply only here-in-after and the labour element is included in this item. Make : Bosch/Hi-Tech/Tata

Supply only bronze impellers with key to match with multi stage pumping set (10 stage)

Supply only diffusers to match with multi stage pumping set (10 stage)

Supply only Sealing kit to match with multi stage pumping set (10 stage)

Supply only Bearing as per existing size and make to match with multi stage pumping set (10 stage)

Supply only Bronze bush set of two to match with multi stage pumping set (10 stage)

S&F 40mm bore High density poly-ethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 laid in trenches with all fittings and fixed complete all as specified and directed by Engineer-in-Charge

S&F 32mm bore High density poly-ethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 laid in trenches with all fittings and fixed complete all as specified and directed by Engineer-in-Charge

S&F PVC Elbow of size 40mm bore as per site requirement complete with and including seal, all as per directed by Engineer-in-Charge

S&F PVC Union of size 40mm bore as per site requirement complete with and including seal, all as per directed by Engineer-in-Charge

Supply and fixing PVC non return valve/reflux valve flanged type size 40mm dia with necessary gasket, nuts, bolts and washers etc as in replacement all as specified and directed by Engineer-in-charge.

Supply only electronic type PH/Acid dozing pump, diaphragm type of capacity (0-5 LPH), 4 Kg/cm2, panel mounted with inlet and outlet tubes complete all as specified and directed by Engineer-in-charge. Make : E-Dose/Action Aqua/Aben

Supply only digital TDS indicator panel mounting type with inlet and outlet tubes as per existing PH indicator all as per specified and directed by Engineer-in-charge. Make : E-Dose/Action Aqua/Aben

Supply only big blue candle outer cover/housing having diameter 100mm & length 500mm as per manufactures recommendation complete all as specified and directed by Engineer-in-Charge. Make : Aqua guard/ Kent RO or equivalent make as approved by GE

S&F in replacement of pressure limiting switch digital circular type for line mounted adjustment as per existing size complete all as specified and directed by Engineering-in-charge. Make : NCPL/Boaril/Yokogawa.

S&F in replacement of square type Voltmeter 0-500 Volts as per site requirement complete all as specified and directed by Engineer-in-Charge. Make : NCPL/Boaril/AE/HPL

S&F in replacement of square type Ammeter 0-60 Volts as per site requirement complete all as specified and directed by Engineer-in-Charge. Make : NCPL/Boaril/AE/HPL

Supply only chemical permacair-999 complete all as specified and directed by Engineering-in-charge. Make : SST/THERMAX/ METAL GUARD INDUSTRIES

Supply only Anti scalent INDION-8211 complete all as specified and directed by Engineering-in-charge. Make : SST/THERMAX/ METAL GUARD INDUSTRIES

Supply only Indian Pri booster for RO plant 1969 complete all as specified and directed by Engineering-in-charge. Make : SST/THERMAX/ METAL GUARD INDUSTRIES

Supply only liquid Membrane Cleaner solution complete all as specified and directed by Engineering-in-charge. Make : SST/THERMAX/ METAL GUARD INDUSTRIES