REPAIR/REPLACEMENT OF HIGH BAY LIGHTS, BLDG SECURITY LIGHTS FOR SITE-II SITE-IX SITE-X AND SITE- XI AT 24 ED UNDER AGE(I) (AF) MANAURI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose, pendants,regulators, sockets, lamp holders, light fittings etc removing old unserviceable material from site and serviceable material to site for keeping in safe custody and making good disturbed surfaces of wall, floor etc. all as directed.

Material and labour for point wiring including fixed on surface of structure truss etc rigid non-metallic PVC conduit pipe medium grade, ISI marked heavy duty in size 20 mm dia with 1.5 sqmm FRLSH insulated unsheathed, multi stranded copper conductor cable, single core 1100 volt grade with flush cast iron/ pressed steel terminal boxes of suitable size for fixing of switches, sockets and fan regulators etc piano / modular type accessories with 3 mm thick plastic laminated sheet cover and fixing with brass screws/cup washer and including FRLSH insulated & unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm as continous earth wire complete including making good the disturbed surfaces for the following:

One light/fan point controlled by one way independent switch.

One 3 pin 5 Amps socket outlet point on same board controlled by one switch.

One 3 pin 5 Amps socket outlet point on independent board controlled by one switch.

All as per above item No-2 here in before point wiring for 15 Amps socket using 2.5 Sqmm copper cable for phase and neutrl and 2.5 Sqmm as earth wire complete.

All as per above item No-2 here in before power point wiring using 4 Sqmm copper conductor cable FRLSH insulated unsheathed and unsheathed copper conductor of 4 Sqmm as earth wire complete all as specified and as directed.

Supply and fix switch piano, flush type, single pole, one way 5 Amps complete all as specified and as directed.

Supply and fix switch piano, flush type, single pole, one way 15 Amps complete all as specified and as directed.

Supply and fixing modular type power unit single phase 220 volts 32 Amps socket and control switch ISI marked 4 module complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 5 pin 5 Amps flush type complete all as specified and as directed. .

Supply and fix socket 2 in 1, 5 pin 6/ 16 Amps flush type complete all as specified and as directed. .

Supply and fixing ceiling rose surface type 65 mm x 50 mm, 2 to 3 terminal complete all as specified and as directed. .

S&F in replacement for LED light fitting with frame, driver etc in 20 W 4 feet long white colour mounting on two Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete all as specified and directed..

S&F in replacement for industrial reccess LED 45 watts light fitting energy saving low glare high power incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete as directed.

S&F in replacement for LED tube light fitting with frame, driver etc in 10 W 2 feet long white colour mounting on two Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible conduit pipe from ceiling rose to fittings complete all as specified and directed.

S&F in replacement for LED street/ Bldg security light fittings 45 watts energy saving incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings and mounting bracket made out by GI pipe light grade in 25 mm dia of bore in required length bend in 120 degree fixed with clamping of surface of wall using clamp made out by GI strip in size 32 x4 mm using nut bolt and washer etc complete as directed.

S&F in replacement for high bay down light LED 80 Watt high efficacy with hanging accessories with beam/ struss etc as site and making all connection using three core copper flexible cable drawn through in PVC flexible conduit pipe from ceiling rose to light fittings complete all as specified and directed.

S&F for sub main wiring with two runs of single core PVC FRLSH IS-694 cable with unsheathed multi-stranded copper conductor of size 4 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe medium grade heavy duty in suitable size with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 4 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Three run of 4 Sqmm with one run of PVC conduit pipe shall be measured against one unit. (ii) Cost of cutting /chasing / plastering /colouring etc as site shall be included matching to disturbed surface.

S&F for sub main wiring with three runs of single core PVC FRLSH IS-694 cable with unsheathed multi-stranded copper conductor of size 6 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe medium grade heavy duty in suitable size with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 6 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Four run of 6 Sqmm with one run of PVC conduit pipe shall be measured against one unit. (ii) Cost of cutting /chasing / plastering /colouring etc as site shall be included matching to disturbed surface.

S&F for sub main wiring with two runs of single core PVC FRLSH IS-694 cable with unsheathed multi-stranded copper conductor of size 1.5 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe medium grade heavy duty in suitable size with all necessary fittings including one run of FRLSH insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm as earth wire (green in colour) and connected to common earth dolly laid on surface of false ceiling or concealed as per site requirement complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Three run of 1.5 Sqmm with one run of PVC conduit pipe shall be measured agaist one unit. (ii) Cost of cutting /chasing / plastering /colouring etc as site shall be included matching to disturbed surface.

S&F in replacement of sheet metal enclosure distribution board TPN, 4 poles ,double door, 4 way with 200 Amps rated bus bar incl provision to fix MCCB 4 pole 63 Amps as incomer complete all as specified and as directed. Note; Quoted rate shall be included cost of cutting plastering and colouring to surface of wall to be concealed etc all site required matching with existing surface.

S&F in replacement of sheet metal enclosure for sheet metal enclosure distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts complete all as specified and as directed.

S&F in replacement of MCCB , 415 volt TPN 4 poles 63 Amps ,16 KA breaking capacity, thermal based adjustable type complete all as specified and as directed.

S&F in replacement of MCB , TPN, 4 pole 415 volts , 63 Amps , "C" Curve 10 KA complete all as specified and as directed.

S&F in replacement of MCB , SPN, 215/220 volts , 32 Amps , "C" Curve 10 KA complete all as specified and as directed.

S&F in replacement of MCB , SP, single pole 215/220 volts , 32 Amps , "C" Curve 10 KA complete all as specified and as directed.

Supply and fixing in replacement Air circulator fan steel body heavy duty 600 mm sweep bracket mounted type copper wound motor ISI marked 3 star rated energy saving with fixing accessories complete all as directed. Note: Old air circulator fan steel body shall be deposited to AGE E/M MES store yard of AGE(I) (AF) Manauri.

Supply and fixing in replacement wall mounting fan heavy duty 450 MM sweep bracket mounted type copper wound motor ISI marked 3 star rated energy saving with fixing accessories complete all as directed. Note: Old wall mounting fan shall be deposited to AGE E/M MES store yard of AGE(I) (AF) Manauri.

Supply and fix in replacement motor for Air curtain made out of MS/CRCA sheet of minium thickness 18 gauge finished with two coats of red oxide primer and final coats of synthetic enamel paint (oven baked) with MS -CRCA 18 gauge square perforated suction grills , aluminium alloy fans and single phase electric motor nozzels etc complete with fittings and accessories so as to produce 1-1.5 M/sec air velocity at floor level for door opening in size 7 feet x 4 feet (52" x 90" ) as specified.

Supply and fix in replacement for ceiling fans complete with electronic type regulator and accessories 230 V,1200 MM sweep. BEE 5 star rated with fan hook made out by 32 X 6 MM GI strip and electronic fan regulators complete.Note: Old Ceiling fan shall be deposited to AGE E/M MES store yard of AGE(I) (AF) Manauri.

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanized GI wire 4 MM dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 40 MM bore for protection of GI strip from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 using 20 MM graded stone aggregate for chamber and MS angle iron frame 40 x40 x 3 MM and RCC cover 40 MM thick (1:2:4) type B-1 using 20 MM graded stone aggregate Reinforced with 6 MM dia round bars @ 75 MM C/C both ways with MS handle 12 MM dia , PGI funnel and wire mesh , 20 MM bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed.

Supply fixing in replacement of 200 watt flood light fitting with minimum 100lumen per watt for replacing with High mast tower / pole in any length/ specification ,energy saving IP 65 protection ,required nut bolt washer etc including making electric connection using three core copper flexible cable drawn through in PVC flexible conduit complete all as specified and directed. Note ; Quoted rate shall be included cost to take down/ up, replacing of inter connection cable etc and other required site work.

S&F in replacement LED bollard 10 watt with coverage of 360º lighting area and IP65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fitting complete all as specified and as directed by Engr-in-Charge.

Supply, laid in duct/ fix or clamping on surface of wall / beam/ roof etc connecting thembling to XLPE insulated armoured heavy duty electric power cable (E) with aluminium conductor 1100 volts garde cross sectional area 10Sqmm x 2 core including taking down old cable complete all as specified and as directed by Engr-in-Charge.

M/S VIJAY SINGH (BID ID -3114094)

PITAMBARI TRADERS (BID ID -3115424)

Ajanta Motor Store (BID ID -3116219)

Z N Enterprises (BID ID -3126142)

M/S Garg Sons (BID ID -3116113)