Construction of Shed to Raw Material for Outsourcing Department at LCA Plant II at HAL BC Including Electrical Work

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Construction of Shed to Raw Material for Outsourcing Department at LCA Plant – II at HAL [BC] – [Including Electrical Work]. CONTRACT NO. HAL/FMD/C-48/25-26

Name of the Contractor : X

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

Part 'I' - Civil Works

1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing, etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m for all lifts with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 431.00 Cu m 173.00 Rupees One Hundred Seventy Three Only 74563.00

2 Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock, etc., in trenches, plinth, sides of foundations, etc., spreading in layers not exceeding 20cm thick, watering, breaking / removing clods exceeding 50mm, ramming and consolidation of each deposited layer, etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50m and for all lifts, etc., all complete as directed by the Engineer-in-Charge. 393.00 Cu m 191.02 Rupees One Hundred Ninety One and Two Paise Only 75070.86

3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, pipes, cables, ramp sides, etc. in all kinds of soils (not exceeding 1.50m in width or 10Sq m on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 4.00 Cu m 253.69 Rupees Two Hundred Fifty Three and Sixty Nine Paise Only 1014.76

4 Extra for levelling & neatly dressing the excess soil in the visinity, etc., all complete as directed by Engineer-in-Charge. 42.00 Cu m 90.69 Rupees Ninety and Sixty Nine Paise Only 3808.98

5 Supplying, mixing and placing plain cement concrete (1:2:4) of required thickness using 20mm nominal size down graded hard stone / granite aggregate in accordance with IS 456 in Cills, fillets, coping, etc., upto floor five level, including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., including finishing, etc., all complete as directed by the Engineer-in-Charge. 0.50 Cu m 9643.63 Rupees Nine Thousand Six Hundred Forty Three and Sixty Three Paise Only 4821.81

6 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary curing, excavation, levelling & dressing & finishing the top smooth, etc., all complete as directed by the Engineer-in-Charge. 80.00 Sq m 730.25 Rupees Seven Hundred Thirty and Twenty Five Paise Only 58420.00

7 Providing, mixing and laying in position cement concrete (1:3:6) derived from natural sources of required thickness using 20mm down graded hard stone/granite aggregate in accordance with IS 456 in all works up to plinth level and in Flooring including mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc, all complete as directed by the Engineer-in-Charge. 39.00 Cu m 7109.25 Rupees Seven Thousand One Hundred Nine and Twenty Five Paise Only 277260.75

8 Formwork (Centering and shuttering including strutting, propping etc, and removal of form) for the following RCC members which are defined as below, in fair finished by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete, etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note: Formwork material is contractor's own property and shall be removed after completion of work.

a) Foundations, footings, bases of columns, pedestal, steps, etc., for mass concrete. 156.00 Sq m 382.19 Rupees Three Hundred Eighty Two and Nineteen Paise Only 59621.64

b) Lintels, Beams, etc., 181.00 Sq m 717.68 Rupees Seven Hundred Seventeen and Sixty Eight Paise Only 129900.08

c) For Columns, Pillars, Piers, etc., 48.00 Sq m 936.87 Rupees Nine Hundred Thirty Six and Eighty Seven Paise Only 44969.76

d) Chajja, Weather shade,Canopies, Corbels, etc., including edges 41.00 Sq m 926.93 Rupees Nine Hundred Twenty Six and Ninety Three Paise Only 38004.13

9 Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above / below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.90mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry. 10.856 M T 105120.00 Rupees One Lakh Five Thousand One Hundred Twenty Only 1141182.72

10 Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for reinforced cement concrete work; using coarseaggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-Charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.

a) All works upto plinth level including necessary openings and packing if any for laying pipes, cables, etc., 47.00 Cu m 9263.12 Rupees Nine Thousand Two Hundred Sixty Three and Twelve Paise Only 435366.64

b) All works above plinth level upto floor V level including necessary openings and packing if any for laying pipes, cables etc., 17.00 Cu m 9609.72 Rupees Nine Thousand Six Hundred Nine and Seventy Two Paise Only 163365.24

11 Construction of Coursed rubble masonry (first sort) in cement mortar (1:6) (1 cement : 6 coarse sand) with hard stone, solidly hearted faces, beds and joints squared back, in foundation and below plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level, raking out joints 10mm deep, curing, providing weep holes if any, etc., all complete as directed by the Engineer-in-Charge. 1.50 Cu m 8588.02 Rupees Eight Thousand Five Hundred Eighty Eight and Two Paise Only 12882.03

12 Providing and fixing expansion hold fasteners with threaded dia of 6mm on C.C. / R.C.C. / Brick masonry surface backing including drilling necessary holes and the cost of bolt, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge . 140.00 Each 35.83 Rupees Thirty Five and Eighty Three Paise Only 5016.20

13 Providing and fixing M.S. grills of required pattern in openings/ wooden frames of windows, Ventilators, etc., with rawl plugs screws, ends of bars shouldered and / or riveted, welded, etc., of approved design using MS structurals such as flats, angles, round / square bars, etc., including necessary cutting, welding, embedding in concrete, masonry etc.,including priming coat with approved steel primer, etc., all complete as directed by the Engineer-in-Charge. 432.00 Kgs 232.30 Rupees Two Hundred Thirty Two and Thirty Paise Only 100353.60

14 Supplying and fixing the [40 x 5]mm flat iron hold fast 40cm long of approved make and design to door with all required screws, bolts, nuts, washers, etc., including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block [30 x 10 x 15]cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as directed by the Engineer-in-Charge. 6.00 Each 223.04 Rupees Two Hundred Twenty Three and Four Paise Only 1338.24

15 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as per direction of Engineer- in-Charge. 18.534 M T 130310.00 Rupees One Lakh Thirty Thousand Three Hundred Ten Only 2415165.54

16 Supplying, fabricating and fixing second class teak wooden plain, solid, straight chowkats and frames of doors, windows, partitions, wall panelling frames and other frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed to wall or in position with hold fast lugs or with dash fasteners of required dia & length, etc., all complete as directed by the Engineer-in-Charge. 0.09 Cu m 139315.39 Rupees One Lakh Thirty Nine Thousand Three Hundred Fifteen and Thirty Nine Paise Only 12538.39

17 Providing, fabricating and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates,suitable blocks for taking mortice locks, latches or other fittings, fitting to frames / chowkats, etc., all complete as directed by the Engineer-in-Charge. 2.88 Sq m 3836.13 Rupees Three Thousand Eight Hundred Thirty Six and Thirteen Paise Only 11048.05

18 Providing, fixing, testing and commissioning single socketed pipes of 110mm dia, on wall face unplasticised Rigid PVC rain water pipes of 6Kg/cm² SWR grade and of approved make conforming to IS : 13592 Type A, including jointing together with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion and all necessary fittings & specials, bends, branches, sockets, clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines, etc., along with removal of existing rain water pipes, etc., all complete as directed by the Engineer-in-Charge. 36.00 R m 367.81 Rupees Three Hundred Sixty Seven and Eighty One Paise Only 13241.16

19 Providing and fixing Pre-painted Galvalume sheet (PPGL) / precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc-AL alloy coating over 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and Silicon Modified polyester (SMP) top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size [5.50 x 55]mm with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, etc., all complete as directed by the Engineer-in-Charge. Note: A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 531.00 Sq m 719.88 Rupees Seven Hundred Nineteen and Eighty Eight Paise Only 382256.28

20 Providing and fixing Ridge (width 500-600mm) Pre-painted Galvalume sheet (PPGL) / precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with with zinc-AL alloy coating over 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and Silicon Modified polyester (SMP) top coat 15-18 microns polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridge Plain [500-600mm], etc., all complete as directed by the Engineer-in-Charge. Note: A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 20.00 R m 518.83 Rupees Five Hundred Eighteen and Eighty Three Paise Only 10376.60

21 Providing and fixing Falshings up to width of 600mm Pre-painted Galvalume sheet (PPGL)/ precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc-Al.Alloy coating, in 240 mpa steel grade, 5-7 microns epoxy primer on both side and Silicon Modified polyester (SMP) of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete, etc., all complete as directed by the Engineer-in-Charge. Note: A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 92.00 R m 473.26 Rupees Four Hundred Seventy Three and Twenty Six Paise Only 43539.92

22 Providing and fixing Gutter to Girth 600mm Pre-painted Galvalume sheet (PPGL) / precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05 mm) with Zinc-Al.caoting over 240 mpa steel grade, 5-7 microns epoxy primer and Silicon Modified polyester (SMP) top coat 15-18 microns on both side of the sheet using self drilling/ self tapping screws, etc., all complete as directed by the Engineer-in-Charge. Note: A performance guarantee bond for 5 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 40.00 R m 1280.31 Rupees One Thousand Two Hundred Eighty and Thirty One Paise Only 51212.40

23 Providing, applying and laying cement mortar (1:6) plastering 15mm thick on brick / solid blocks / concrete surfaces, finished even and smooth with trowel for Internal / External walls, etc., including supply and fixing of hexagonal chicken mesh minimum 150mm wide having opening [20 x 20]mm of 26 gauge at juncitons of concrete & brick work or between different material, including making grooves as per the requirement not exceeding 10mm width and not exceeding 10mm deep with necesary materials, labour, scaffolding, curing, tools and tackles, etc., at all heights, etc., all complete as directed by the Engineer-in-Charge. 189.00 Sq m 373.27 Rupees Three Hundred Seventy Three and Twenty Seven Paise Only 70548.03

24 Providing, applying and laying 18mm thick cement plaster work in two coats for external areas as directed. First coat 12mm thick in cement mortar (1:5) made rough to recieve top coat, second coat 6mm thick in cement mortar (1:6) , final surface finished with a floating coat of neat cement after necessary preparation of surface, at all levels including supply and fixing of hexagonal chicken mesh minimum 150mm wide having opening [20 x 20]mm of 26 gauge at juncitons of concrete & brick work or between different material, with necesary materials, labour, scaffoldings, curing, tools and tackles, plants, etc., threading if any as directed, etc., all complete as directed by the Engineer-in-Charge. 308.00 Sq m 505.36 Rupees Five Hundred Five and Thirty Six Paise Only 155650.88

25 Painting newly plastered external surfaces with two or more coats applied at 1.43 litre/10Sq m/ as per manufacturer specifications of 100% premium acrylic emulsion paint having VOC less than 50 grams/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint with silicon additives of approved make, colour, shade, tint & pattern at all levels, over and including a coat of approved acrylic primer including preparing the surface by removing loose dirt and any organic growth, filling of cracks, necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge. Note: The paint shall have anti-algal, anti-fungal, UV resistant & anti-tarnishing qualities with 100% acrylic base and silicon or elastomeric additives. 308.00 Sq m 176.65 Rupees One Hundred Seventy Six and Sixty Five Paise Only 54408.20

26 Painting Steel surfaces of any description with two coats of synthetic enamel paint of approved colour,brand and manufacture to give an even shade, including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth, etc., all complete as directed by the Engineer-in-Charge. 1099.00 Sq m 220.50 Rupees Two Hundred Twenty and Fifty Paise Only 242329.50

27 Painting newly plastered interior surfaces with two coats of premium acrylic emulsion paint of interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre conforming to IS 15489, of approved make, brand, colour, shade, tint, manufacture & pattern at all levels, including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even and smooth by providing and applying white cement based putty of average thickness of 1mm in 2 coats of approved brand and manufacture over the plastered wall surface and followed by the applying priming coat with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on applied putty having VOC content less than 50 grams/litre, necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge. 189.00 Sq m 363.33 Rupees Three Hundred Sixty Three and Thirty Three Paise Only 68669.37

28 French Polishing on wood work on New work with two or more coats including a coat of wood filler, etc., all complete as directed by the Engineer-in-Charge. 6.05 Sq m 434.91 Rupees Four Hundred Thirty Four and Ninety One Paise Only 2631.21

29 Supply, laying and compacting of granular sub-base in flooring, subbases, ramps, etc., upto plinth level of requisite grading by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, etc., all complete as per specifications and directions of Engineer-in-Charge. 43.00 Cu m 2737.15 Rupees Two Thousand Seven Hundred Thirty Seven and Fifteen Paise Only 117697.45

30 Providing and laying design mix cement concrete of M-30 grade manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer in roads / hardstandings / flooring using cement content as per design mix, using coarse sand and graded stone aggregate of approve size in appropriate proportions as per approved & specified design criteria, laying over reinforcement, spreading and compacting mechanically by using needle vibrator, levelling to the required slope / camber, finishing with required texture including steel form work with sturdy M.S channel sections, curing making provision for contraction/expansion joints, construction and longitudinal joints (10mm wide X 50mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealent, etc., all complete as per the drawings/directions of Engineer-in-Charge. Note: Cement content considered in M-30 is @ 340 kg/Cu m. 50.00 Cu m 10816.29 Rupees Ten Thousand Eight Hundred Sixteen and Twenty Nine Paise Only 540814.50

31 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, etc., all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) 48.00 per 5cm depth and 1cm width and 1m length 25.83 Rupees Twenty Five and Eighty Three Paise Only 1239.84

32 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements, etc., all complete as per direction of the Engineer-in-Charge. 48.00 per 5cm depth and 1cm width and 1m length 42.15 Rupees Forty Two and Fifteen Paise Only 2023.20

33 Providing, fabricating and fixing aluminium work for partitions, Curtain wall frames, Windows Fixed Portion i.e frames (Min. thickness of powder coating 50 microns) made up of aluminium extruded sections, windows, etc.,of approved make, a) Sliding Window Frame: Top and side sections of the frames to accomodate the shutter section. b) Bottom section of the frame shall be with gutter and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, c) Shutters are to be provided with galss of approved size for two shutters and stainless steel fly proof mesh for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip not less than 0.90mm thick. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, Panelling, fly proof mesh will be paid seperately). 230.00 Kgs 517.41 Rupees Five Hundred Seventeen and Forty One Paise Only 119004.30

34 Providing, fabricating and fixing aluminium work for shutters of doors, windows and ventilators including rollers, etc., all complete as directed by the Engineer-in-Charge. 82.50 Kgs 618.33 Rupees Six Hundred Eighteen and Thirty Three Paise Only 51012.23

35 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions, etc., With float glass panes of 5mm thickness (weight not less than 12.50 kg/sqm) along with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. 110.00 Sq m 1466.99 Rupees One Thousand Four Hundred Sixty Six and Ninety Nine Paise Only 161368.90

36 Providing and laying factory made Precast concrete solid blocks of 200mm thickness of grade M10 made of Normal resources / C & D waste from approved manufacturer in superstructure above plinth level upto floor V level with Cement mortar (1:6) in true line and height including curing, cleaning, etc., all complete as per the direction of Engineer-in-Charge. 24.00 Cu m 9594.37 Rupees Nine Thousand Five Hundred Ninety Four and Thirty Seven Paise Only 230264.88

37 Supplying and fixing Motorized G.I. rolling shutter, made of approximate size [5 X 5]m and approved make. The curtain shall be constructed from Tata Bluescope/JSW 150 gsm single skinned galvalume steel laths with natural finish of min. 1.25mm thickness and interlocking distance of min 75mm. Side guides shall be made of min. 2 or 3.15mm thick heavy duty TG Galvanised steel, as per the site requirement, along with necessary fixtures like cleats(spacing shall not exceed 0.75m) or supports brackets for attachments to the walls or column by screws or bolts and necessary seals.The size of the guide channels shall be conforming to Is:6248-1979. Single piece G.I. Heavy duty mild steel suspension shaft along with roller of sufficient diameter with springs shall be provided along with necessary hexagonal bracket plate of minimum 3.15mm thickness, size conforming to Is:6248-1979 and square bar, if necessary. The provision of Pressed galvalume steel hood cover with reinforced bracket as required to suit the shutter width and motor cover with natural finish of min. 0.90mm thick and of reuired shape along with necessary fixtures and stiffeners like angle cleats, angle or flat stiffeners, etc., shall be provided. Bottom profile shall be of G.I. plate with angle stiffner. The bottom rail shall be fixed with extruded rubber bottom seal that shall seal against the floor when the door is fully closed. The CE Certified CRS Compact Gear motorised system shall be indirect drive type along with system power supply wired with industrial plug and three station push button / switch with deadman control and arrangements for inside and outside locking. A provision of suitable safety devices/system like inbuilt limit switches, 18.00 Sq m 9407.35 Rupees Nine Thousand Four Hundred Seven and Thirty Five Paise Only 169332.30

External safety brake's, Control switch, etc., are to be provided in accordance with EN 14121-1:2007 Safety of machinery. Provision shall be made for manual operation by hand chain in emergency condition, etc., all complete & fully operational. The rate is inclusive of two coats of painting, of approved shade and manufacture, over a coat of grey epoxy primer by spray including preparation of surface, all materials, labour, machinery, tools and tackels, etc., all complete as directed by the Engineer-in-Charge. Note: (i) Clear opening shall be measured for payment. (ii) The quoted rate shall be for the entire work and making it operational.

Sub-Total of Part 'I' - Civil Works (Excluding GST) Rupees Seventy Five Lakh Fifty Three Thousand Three Hundred Thirty Three and Fifty Six Paise Only 7553333.57

Part 'II' - Electrical Works

1 Supply, fixing to existing MS perlins at approx. 6.5 to 7 mtr height(Approx.), using suitable MS angle frame work with required fixing hardwares etc., as per site requirement, testing & commissioning of industrial type highbay LED lighting fixture of wattage not exceeding 120 watts made out of high pressure diecast aluminium housing, diffuser made of high grade toughened glass(or as per OEM standards), integral control gear, eye hook etc., . The technical parameters of lighting fixtures are as below: The luminaire should have Lumen efficacy ≥ 140lm/watt and lumen output not less than 16800lumens, PF>0.90 and Colour temperature shall be ≥5700K, CRI≥70, THD <10%, IP66/65 operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V with standard accessories complete in all respects and as directed by Engineer in-charge. The fitting may be of Crompton model no:CIP-320-120-57-60D-HL4-GL-NSR/ Equivalent model in other approved makes. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminaries & LM80 certificate for LED shall be produced. Note: MS supports will be paid separately. 9.00 Nos 18827.97 Rupees Eighteen Thousand Eight Hundred Twenty Seven and Ninety Seven Paise Only 169451.73

2 Distribution Boards

Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports(including), chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

a) 4 way HTPN MCB DB 1.00 No 4232.51 Rupees Four Thousand Two Hundred Thirty Two and Fifty One Paise Only 4232.51

3 MCCBs, MCBs & RCBO

Supply, fixing, testing & commissioning of following rating MCCB/MCB/RCBO in the existing Distribution board/powder coated enclosure as directed by Engineer-in-Charge.

a) 40-63 amps. ratings , 4P MCB, "C" curve, 10 KA breaking capacity. 1.00 No 1638.98 Rupees One Thousand Six Hundred Thirty Eight and Ninety Eight Paise Only 1638.98

b) 6-32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity. 12.00 Nos 264.85 Rupees Two Hundred Sixty Four and Eighty Five Paise Only 3178.20

4 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 2.00 Nos 1677.08 Rupees One Thousand Six Hundred Seventy Seven and Eight Paise Only 3354.16

5 Supply & laying, testing & commissioning in the already excavated cable trench/fixing on wall/duct wall/cable tray with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 3.5Cx25 Sqmm XLPE insulated Aluminium conductor 1100V gr. Armoured U.G cables complete in all respect as directed by EIC. 70.00 Mtrs 212.02 Rupees Two Hundred Twelve and Two Paise Only 14841.40

6 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE armoured aluminium conductor cable of 1.1 KV grade as required

3.5C X 25 sq. mm Al arm cable 2.00 Nos 323.82 Rupees Three Hundred Twenty Three and Eighty Two Paise Only 647.64

7 Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. 5.00 Nos 606.26 Rupees Six Hundred Six and Twenty Six Paise Only 3031.30

8 Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 3 x 2.5 sq. mm (lighting & exhaust fans) 160.00 Mtrs 284.52 Rupees Two Hundred Eighty Four and Fifty Two Paise Only 45523.20

b) 3 x 4 sq. mm(For 16A power points & 20A powerpoints) 120.00 Mtrs 345.55 Rupees Three Hundred Forty Five and Fifty Five Paise Only 41466.00

9 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

a) 20MM PVC Conduit 30.00 Mtrs 132.42 Rupees One Hundred Thirty Two and Forty Two Paise Only 3972.60

b) 25MM PVC Conduit 40.00 Mtrs 150.02 Rupees One Hundred Fifty and Two Paise Only 6000.80

a) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 70.00 Mtrs 43.46 Rupees Forty Three and Forty Six Paise Only 3042.20

a) Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 10 pair krone type telephone connector junction box including krone connector with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects. 1.00 No 800.00 Rupees Eight Hundred Only 800.00

b) Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/iron structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 10 pair jelly filled armoured copper conductor of 0.5mm dia polyethylene insulated cover, twisted into pairs, colour coded, pairs laid up, fully filled with petroleum jelly as a moisture barrier, core wrapped with non-hygroscopic polyester tape to contain the jelly, covered with aluminium poly-laminates screen, polyethylene sheath extruded over aluminium screen, polyethylene tape over the above sheath, armoured with galvanised steel tape and outer polyethylene sheath underground telecommunication cable including both end terminations on the existing krone type junction box complete in all respects. 70.00 Mtrs 200.00 Rupees Two Hundred Only 14000.00

c) Supply & drawing of 0.5 mm dia copper conductor PVC insulated 4 pair colour coded and twisted unarmoured telecommunication cables in the existing PVC conduit as per standard practice including necessary inter connections & end terminations. 80.00 Mtrs 55.87 Rupees Fifty Five and Eighty Seven Paise Only 4469.60

d) Supply, Fixing, in flush with wall/on wall as per site condition, suitable size modular GI box/PVC box with base plate, glossy front cover for supply and housing of 1 No. of Twin RJ-11 telephone socket outlets with shutter including supply of suitable size modular type GI concealed/open PVC mounting box with base plates, front covers, etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge. 2.00 Nos 153.12 Rupees One Hundred Fifty Three and Twelve Paise Only 306.24

e) Supply and drawing in the existing PVC conduits / wall / above false ceiling, 2runs of Cat 6 UTP 4-Pair cable including necessary interconnections complete for LAN & Internet point as directed by Engineer-in-charge. 145.00 Mtrs 99.32 Rupees Ninety Nine and Thirty Two Paise Only 14401.40

f) Supply, Fixing in flush with wall/on Aluminium partition as per site condition, testing & Commissioning of 2 nos of RJ-45 modular type sockets for Data points including supply of suitable size modular MS/PVC surface mounting box with base plates, glossy finish front covers, labelling etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX/Legrand/Schneider/HAL approved makes 2.00 Nos 700.00 Rupees Seven Hundred Only 1400.00

12 Supply and laying of 63mm dia, PE-80, PN8 ISI marked HDPE pipe confirming to IS 4984:19955 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge. 40.00 Mtrs 140.38 Rupees One Hundred Forty and Thirty Eight Paise Only 5615.20

13 Supplying and fixing of 100 x 50 x 1.6mm size Hot dip galvanised Perforated type cable tray, steel: As per IS:2062 / 1079, Galvanising : As per IS: 2629 / 4759 including all accessories like base slotted angle , horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners etc. Note: MS supports will be paid separately. 40.00 Mtrs 650.94 Rupees Six Hundred Fifty and Ninety Four Paise Only 26037.60

14 Supply and fixing of weather proof cable junction box with terminals of size 104 mm x 104 mm x 70 mm Hensel Cat. No. DK 0402 G or equivalent in Legrand/ Schneider/ Hagar make only. The Box shall be mounted on the truss using suitable size MS angle frame work(including) with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge. 6.00 Nos 1156.78 Rupees One Thousand One Hundred Fifty Six and Seventy Eight Paise Only 6940.68

15 Excavation in all types of soil for Cable trench including refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge. 5.00 Cu.Mtrs 501.39 Rupees Five Hundred One and Thirty Nine Paise Only 2506.95

16 Concrete cutting/Chipping/Bitumen Road the existing 1:3:6 or richer mix cement concrete road /pavements / flooring / rock/stone etc., including removing debris from the work site and taking out of the division and depositing in the place as directed by EIC. 1.00 Cu.Mtr 2368.53 Rupees Two Thousand Three Hundred Sixty Eight and Fifty Three Paise Only 2368.53

17 Re-concreting the cut portion with 1:2:4 cement concrete by employing 20mm graded aggregate granite to smooth finish including curing and form work if any complete in all respects and as directed. 1.00 Cu.Mtr 8351.64 Rupees Eight Thousand Three Hundred Fifty One and Sixty Four Paise Only 8351.64

18 Design, Fabrication, Supply and fixing/grouting/welding on wall/ceiling/truss of suitable size MS angle iron supports/ flat/ brackets for light fixture and cable tray supports, as per site requirement and painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer complete in all respects and as directed by EIC/OIC. 40.00 Kgs 114.18 Rupees One Hundred Fourteen and Eighteen Paise Only 4567.20

19 Supply and laying of 80mm dia class B GI.Pipe for encasing cable across the road/ drain/cble duct entry for encasing the cable and as per standard practice & as directed by Engineer-in-charge. 20.00 Mtrs 1142.15 Rupees One Thousand One Hundred Forty Two and Fifteen Paise Only 22843.00

Sub-Total of 'II' - Electrical Works (Excluding GST) Rupees Four Lakh Fourteen Thousand Nine Hundred Eighty Eight and Seventy Six Paise Only 414988.76

Total of Part 'I' + 'II' (Excluding GST) Rupees Seventy Nine Lakh Sixty Eight Thousand Three Hundred Twenty Two and Thirty Two Paise Only 7968322.33

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 7968322.33 BELOW % 7968322.33

Add 18% GST Rupees Fourteen Lakh Thirty Four Thousand Two Hundred Ninety Eight and One Paise Only 1434298.02

Grand Total (Including GST) Rupees Ninety Four Lakh Two Thousand Six Hundred Twenty and Thirty Four Paise Only 9402620.34

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-48/25-26

Name of Work: Construction of Shed to Raw Material for Outsourcing Department at LCA Plant – II at HAL [BC] – [Including Electrical Work].

Estimated Amount in Rs.: 9400000

Tender Notice Date : 18.08.2025

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 1 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2024-25 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2023- 2024 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 2820000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 3760000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II