Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC | ₹11.5 L | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹11.9 LRejected-Finance | ₹11.9 L | L2 | Rejected-Finance L2 bidder |
| 3 | L3₹12.3 LRejected-Finance | ₹12.3 L | L3 | Rejected-Finance L3 bidder |
Tender Value
₹13.2 L
EMD Value
₹27,000
Closing Date
28 Mar 2026, 12:00 pmClosed
EE RED DIVISION MEERUT
VIKAS BHAWAN 3RD FLOOR COLLECTORATE MEERUT
Koshagar Meerut mai anurakshan karya
2026_REDUP_1129052_1
2565/RED/2025-26/dt-25-02-26
Open Tender
Civil Works - Buildings
180 days
Meerut
Please refer Tender documents.
2 documents required · 2 mandatory
₹944
₹27,000
13 May 2026
23 Mar 2026
28 Mar 2026
23 Mar 2026
28 Mar 2026
23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead | |||||
| 212 mm Plaster with 1:6 (C:C/Sand) on Fair face (outer surface) | |||||
| 3P/F of 6 mm Thick glazed Tiles 300x300 in Flooring | |||||
| 4Providing and fixing tiled false ceiling of specified maerials of size 595x595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanised @120 grms/sqm, both side inclusive) consisting of maijn T runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T"12.5mm thick square edge PVC laminated Gypsum Tile of size 595x595mm made of Gypsum plastterboard, manufactured from natural gypsum as per IS 2095 part 1 and laminated with while 0.16mm thick fire etardand PVC film on the face side and 12 micron metalized polyester on the back side with all edges seated with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. | |||||
| 5Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | |||||
| 6Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primerhaving VOCcontent less then 50 grm/lit | |||||
| 7Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Wood Work | |||||
| 8Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Steel Work | |||||
| 9Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | |||||
| 10Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.23 MB
BOQ_2106114.xls
BOQ • 0.35 MB
SBD.pdf
Additional Documents • 4.28 MB
Download all tender documents and submit your bid