ADDN ALTN TO WASHING BAY RCC MANHOLES AND CERTAIN SANCTIONED WORKS AT VARIOUS UNIT UNDER GE N BANGA

Amount

Excavating in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc for for shafts, wells cesspits, manholes, piers holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard / dense soiil etc complete all as specified and as directed

M&L for plain cement concrete Type D-2 1:4:8 with using 40 mm grades stone aggregates as in foundations and mass concrete etc complete all as specified and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surface etc complete all as specified and as directed

M&L for RCC (Nominal Mix) 1:11/2:3 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed

M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better with fair finished surface etc complete all as specified and as directed

M&L for RCC (Nominal Mix) 1:11/2:3 as in Walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc complete all as specified and as directed

M&L for plaint Cement concrete 1:2:4 type B-0 with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

As per item no 8 above but add or deduct 25 mm girth or part of thereof over or under 30cm etc complete all as specified and as directed

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

S&F 200mm dia bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors et complete all as specified and directed

S&F 150mm dia bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors et complete all as specified and directed

M&L for cutting into existing manholes for connecting new drains, internal dia of pipe 150 mm, making good to pipe and rendering, cutting out existing benching for and foring branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 tye B-1 smooth finished, and re-forming benching as required etc complete all as specified and as directed

Demolition and breaking up drain pipes 150mm dia (Salt Glazed ware, AC or reinforced concrete ) set in cement motar etc complete all as specified and as directed

As per item No 15 above, but 200mm dia

Demolition of cement concrete (Un-reinforced) and paving not exc 15 cm thick (below or above ground level) etc complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) below or above ground level etc complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

Dismantling of Stone sett paving of any description or thickness in floors, aprons etc (Laid bedded and pointed in any cement mortar) incl removing off the premises etc complete all as specified and as directed

Demolition of brick work /Stone Masonry/PCC Block masonry built in cement mortar of any description all as specified and directed.

Dismantling of AC Sheets of any description in roof covering incl ridge, wind tie etc. complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in Framed work etc complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Taking down shutter of any description exc 1.0 sqm and not exc 2.00 sqm and refixing in same opening etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed.

Dismantling of cast iron /PVC or reinforced concrete drain pipe up to 100 mm dia incl fittings, jointed in cement mortar etc complete all as specified and directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed

As per item No 28 above but 25 mm dia bore

Dismantling water tanks exc 500ltr but not exc 1000 ltr and removing to store etc complete all as specified and as directed

As per item no 30 above but exc 1000 ltr & not exc 2000 ltr capacity

M&L for Providing precast cement concrete Type B-1 1:2:4 (20 mm graded stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 etc complete

M&L Pre-cast Cement concrete Type C-1, 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

As per item No 34 above but 6 to 8 mm dia etc complete all as specified and as directed

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 but except briks complete all as specified and directed.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium for door / window / ventiliators aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.. complete all as specified etc. complete shall as specified and as directed

Roughening surface of old Concrete floor by picking sweeping clean and washing down with water to remove dust and brushing with neat cement slurry with 3.0 Kg/Sqm of cement etc complete all as specified and as directed

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooing etc complete all as specified and as directed

M&L for cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate) 25 mm thick as in sub base of flooring etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L for matt finished non skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for Hard stone coloured tiles of size 600mmX600mmX15 to 16mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed Make : Somary (Hard Stone) / Johnson (Meteor Series).

M&L for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed

As per item no 43 above, but in skirting / dado etc

M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed

M&L for M Sand Cushioning for Paving Block tiles etc complete all as specified and directed

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded stone aggregate as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:4) on fair faces of concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Rendering 10 mm thick in Cement mortar (1:4) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Supply only liquid water proofing compound

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed

S&F Hollow steel section for structural use in beams, col, rafter purlins or other connecting plates incl necessary welding, riveting, nut bolts as per IS-4923 etc complete all as specified and as directed

S&F Plates (plain or chequered) channels, square cut or notched as in gusset Plate / Base plate (ordinary and counter sunk) forming holes, without any attachment of Fe 410-W (Gde-E- 250) quality-Aetc complete all as specified and as directed

S&F pre painted galvalume Aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tenisile strength of 550 Mpa as in roof covering/cladding to wall, pre fixed with self taping screwes as specified

S&F pre painted galvalume Aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tenisile strength of 550 MPA as in Ridges / Valley Gutter, pre fixed with self taping screwes as specified incl foam filler / closure strips made of cushioning, durable and water resistant foam mateials for metal roof with profile shape and desing to seal the gaps of the roofing panels thereby making the system water tight, noise reduction and to provent insects and other animals from getting inside etc complete

S & F GI suspended false ceiling grid system of size 600x600mm with main runner 29 x 24.7 x 0.8mm cross tee 29 x 24.7 x 0.8mm and wall angle 22.2 x 22.2 x 0.65mm. Ceiling suspended with 3mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main runner, cross tee& wall angle of MS galvanised with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building board fixed to false ceiling including taking down old celing of any description .

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

As per item No 66 above, but 25 mm dia of bore pipe

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 2000 ltrs complete all as specified and directed

As per item 68 above, but 1000 ltr capacity

S & F in repairs 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed

S&F in repairs vitreous china wash basin white Oval shape size 560X410X180mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long complete all as specified and directed.

S&F in repair 15mm dia Pillar tap PTMT fancy type any long body colour screwed, for iron pipe etc complete all as specified and as directed

S&F in repair 15 mm bore dia Bib tap fancy type long body standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 120gms)

S&F in repair 15mm dia stop cock / angle / Concealed cock PTMT fancy type any colour screwed, for iron pipe and fixed etc complete all as specified and as directed

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F in repairs for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F 110mm PVC, SWR pipes, single socketed in any length with rubber rings joint fixed with wall complete all as specified and directed

S&F PVC (SWR) bends (any radius) of 110mm dia.

M&L for preparing New Plastered surface of ceiling and applying three coat of white wash etc complete all as specified as directed

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for preparing newly plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed

As per item no 87 above, but on old Plastered surface of wall

M&L for preparation of new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed

Removing building materials etc. to a distance of exc 1.0 Km but not exc 1.50Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

M.S.Trading Company

Vasavi Electricals

Karthick Constructions

Eeguchi Constructions

Chaitanya Constructions

Sangam Construction