PROVN OF BLDG WITH ATTACHED TOILET FOR SUPPLY DEPOT, TOILETS NEAR BLDG NO T-302 AND T-303 OF APS CENTRE AT GE KAMPTEE.

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavation over areas in soft/loose soil not exc 1.5m deep and getting out etc complete all as specified and directed.

Excavation over areas in soft/loose soil exc 1.5m but not exc 3m deep and getting out etc complete all as specified and directed.

Excavation in trenches not exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches exc 1.5m in deepth and 3m in width and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Excavation in post holes in soft/loose soil not exc 0.5 cum getting out, returing and filling in & well ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good to surface complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for providing cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete and fillings complete all as specified and directed.

M&L for form work to sides of concrete in foundations, footing base, base of columns, sides and soffits of plinth beam and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for form work to sides of columns and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in chajja etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likes complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending and binding with mild steel (annealed) wire not less than 0.90mm dia complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia in spacers, cut to length, bent to shape as required, including cranking, bending and binding with mild steel (annealed) wire not less than 0.90mm dia complete all as specified and directed.

M&L for mild steel TMT bars 8 to 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 28 above but half brick wall in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth withot using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately.

Supply only liquid water proofing compound of approved quality complete all as specified and directed.

M&L for rendering 10mm thick on surfaces of ceiling in cement mortar (1:3) and surfaces finished fair and even complete all as specified and as directed.

M&L for rendering 5mm thick on concrete surfaces with CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of cement primer over two coats of putty complete all as specified and directed.

All as per item No 35 above but in ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

All as per item No 38 above but in ceiling complete all as specified and directed.

M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary form work in 1:2:4 type B-0 complete all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of gauge not exc 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed.

M&L for providing 25mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate), as in sub base in floor/paving etc complete all as specified and directed.

M&L for light shade non skid vitrified ceramic tiles 10mm thick (square/ rectangular) polished area each tiles not exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as per item No 45 above but on vertical surfaces over 10mm thick rendering as in backing coat in CM 1:4 complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base 20mm thick in CM 1:6 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and as directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10mm dia as tie bar confirming to Fe-410-O etc complete all as specified and directed.

S&F flush door shutters solid core construction with block board, core and plywood face panels commercial type on both sides 30mm thickness complete all as specified and directed.

S&F 30mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, and fixing in opening as per specification complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS, & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long, medium weight, cold rolled, mild steel butt hinges complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type anodised of 125mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specified and directed.

S&F aluminium alloy, anodised, 250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F steel windows with side hung shutters including butt type hinges with steel handle, and steel peg stay, complete with glazing and gauzing bars, dovetailed or welded complete all as specified and directed.

All as per item No 61 above but without glazing bars complete all as specified and as directed.

S&F 4.00mm thick glass, ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 4.0mm thick frosted sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each panes complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F towel rail, 20mm dia, chromium plated, fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing, including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F cast iron 'S' / 'P' trap, including jointing with solvent cement of 100mm dia complete all as specified and directed.

S&F 10 ltr capacity PVC valve less symphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including bracket etc complete all as specified and directed. Make:- Prayag Cat No 501 or equivalent.

S&F flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed.

S&F PVC connection 15mm size, 600mm long with PTMT nuts on both side complete all as specified and directed.

S&F rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position complete all as specified and directed.

S&F 20mm dia ball brass valve high pressure with polythene float and fly nut, screwed for iron pipe complete all as specified and directed.

S&F wall mixer, 3 in 1 system (Provn for OH shower and hand shower) complete all as specified and directed. Make:- Prayag cat part No 7380 or equivalent.

S&F 15 mm dia CP bib cock two way double handle with flange screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make:- Prayag cat No 7312 or equivalent.

S&F 15mm bore stop/angle cock, fancy type, chromium plated, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore pipe complete all as specified and directed.

S&F vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F 15mm bore CP urinal spreader for urinals complete all as specified and directed.

S&F vitreous china wash basin of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F waste fittings, brass chromium plated for glazed ware sink, basins, etc with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 15mm bore bib taps, fancy type, chromium plated, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm dia pillar cock, fancy typre, cast copper alloy, chromium plated complete all as specified and directed.

S&F 15mm bore GI tubing, 'Medium grade' with all fitting and fixed to wall and ceiling or laid in floor complete all as specified and directed.

All as per item no 85 above but 20mm bore complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes of single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F CP grating of size 100mm dia complete all as specified and directed.

S&F 110 mm size PVC cowl slotted vent cowl complete all as specified and directed.

S&F 100 mm size cast iron cowl slotted vent cowl complete all as specified and directed.

S&F 125mm dia chromium plated shower rose with or without swivel joints including fixing to 15mm bore pipe complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation, mass concrete and fillings complete all as specified and directed.

M&L for loose filling with aggregate of gauge 80 to 150mm of broken bricks complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggragate) as in surface channels and drains complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 (reinforcement measured and paid separately) complete all as specified and directed.

M&L for 100mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed.

M&L for 100mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in base of floor/hard standing and finished the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade etc complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping/ bed plates including weathering throating and necessary formwork complete all as specified and directed.

M&L for laying 150mm dia salt glazed stone ware drain pipes of grade ‘A’ and jointed in cement mortar and tested on completion, complete all as specified and directed.

M&L for 1:4:8 type D2 concrete bed to drain pipe including packing under and haunching against the side of pipe after they are laid and tested of 150mm bore complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished for 150mm dia pipe and reforming benching as required complete all as specified and directed.

M&L for precast fencing post, in cement concrete B-1, 1:2:4 (Nominal Mix) (using 20mm graded stone aggregate) average cross sectional area exc 100 sqcm and not exc 250 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops, complete all as specified and directed.

S&F galvanised two strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolt including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

S&F post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated & unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marking medium grade concealed in wall/ceilling including FRLSH PVC insulated unsheathed earth wire with copper conductor of size 1.50 sqmm pressed steel terminal modular boxes sunk on wall for mounting of switches switch sockets fan regulator etc including modular white cover plate suitable for mounting modular switches, sockets, fan regulator etc complete all as specified and making good to distrubed surfaces for one light point controlled by one, one way switch. Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, cieling roses and holders shall be connected to common earth dolly.

All as per item No 113 above but one ceiling /exhaust/ wall mounted fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 113 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 113 above but one 3 pin 5 amp socket out point on independent board complete all as specified and directed.

All as per item No 113 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 113 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point complete all as specified and directed.

All as per item No 113 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with 1100 volt grade two single core FR PVC insulated unsheathed stranded copper conductor cable 2x4 sqmm with and inculding 1x4 sqmm copper conductor earth continuity wire drawing in, concealed in wall and including electrical grade non metallic rigid PVC conduit with IS-9537 (Part-III) 1983 marked of suitable size, conealed in wall / ceiling as per site rquirement complete all as specified and directed.

S&F switch, modular type, single pole, one way, 6 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F switch, modular type, single pole, one way, 16 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F socket, modular type, single pole, one way, 6/16 amp, 2/3 pin, 3 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F socket, modular type, single pole, one way, 6 amp, 3 pin combined, 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F modular type bell push 6/16 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F modular fan step regulator, 100/120 watt, 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F ceiling rose, surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F LED light fitting surface mounted bulk head luminaries 9-12W with minimum 800 lumen, IP 65, auminium housing, surge protection including drivers etc complete with all accessories and including connecting up with twin core twisted flexible cable of suitable size of 230V, 50 Hz complete all as specified and directed. Make:- Philips Cat part No Endura LED 10W, Luker Cat Part No LBKOVSL04, CG Cat part No LBH-10-CDL, Surya Cat part No SLE BLH 10W.

S&F LED batten fitting 2' length including drivers having energy consumption 9-11W, 230V, 50Hz, 6500K, not less than 800 lumen, prewired complete all as specified and directed. Make:- Philips Cat part No Slim line 9W, Luker Cat Part No LT5M09, Crompton Cat part No LCTLN-10-CDL.

S&F building security light LED 20-25W with lumen output 2000 with driver with rated voltage 240V, 50Hz including mounting GI, made out of 25mm dia light grade pipe 0.8m bent to shape including FI clamps, nut bolts etc complete all as specified and directed. Make:- Philips Cat part No BRP020, Luker Cat part No LST24 WH, CG Cat part No LSTS-25-CDL.

S&F 18-22 Watt LED tube light fittings with aluminium body complete including rod with not less than 2000 Lumen output and input rated voltage 240V connecting with 2 core 1 sqmm copper conductor cable complete all as specified and directed. Make:- Philips Cat part No Astra Line 20W / CG Cat part No LCTLN-20-CDL / Luker Cat part No LT5M18.

S&F 18-22 Watt LED batten fittings complete including tube rod, input rated voltage 240V connecting with 2 core 1 sqmm copper conductor cable complete all as specified and directed. Make:- Philips Cat part No Slim Line premium plus 24W / CG Cat part No LCTL-18-CDL / Luker Cat part No LT5M18.

S&F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB single pole and neutral 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F ceiling fan 1200mm sweep, 230V, 50Hz with clamp set complete all as specified and as directed.

S&F exhaust fan, single phase, 300mm sweep, metallic body with bolts, nuts, washers and connected electrically complete all as specified and as directed.

S&F lamp holder PVC/ploycarbonate with back plate suitable for batten fitting complete all as specified and as directed.

M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade, laid in trenches, passing through pipes/ducts including testing of cross sectional area 4 core 10 sqmm complete all as specified and directed.

S&F double wall corrugated high dencity polymer ethyl (HDEP) pipe for laying of electric cable of size 50mm outer dia and 38mm inner dia with IS-14930 (Part 2) 2001 and 6mm thickness, laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in deep; for laying of cable trench, pole and stay foundation and getting out in any type of soil complete all as specified and directed.

M&L for earthing complete with galvanised steet earth plate electrode 600 x 600 x 6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminium lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protection pipe upto 7.50 metre long for protection of earthing lead. (f) Reguisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

Fabrication, supplying, installing & commissioning of outdoor type feeder pillar box, wall mounted with rain cowl weather / vermin proof, factory made LT panel, CPRI approved manufacturer having dimensions of size not less than 1050mm x1350mm x 450mm including necessary incoming and outgoing cable connections, cable glands thimbles of required sizes, made out of MS CRCA sheet of 3mm thick for outer shell and 2mm thick for inner shell duly powder coated paint with inner shutter & outer double door with locking arrangement on one side openable fixed on 50 x 50 x 5mm MS angle iron frame complete all as specified and directed comprising of following including refixing existing cables to new panels by proper lugging and cable gland as required:- (a) Bus bar chamber for 3 phase neutral of capacity 200 amps (25mm x 10mm) aluminium bus bar duly insulated. (b) Multifunctioning meter for measuring voltage, ampere, KWH, PF - 01 Nos. (c) One set of pilot lamp. (d) Incoming DPX type MCCB 40 amps, 4 pole, 415 volts, 16 KA thermal magnetic setting type - 01 Nos, Make:- Legrand / L&T / Siemens. (e) Outgoing type MCB 32 amps, 4 pole, 415 volts, 10 KA thermal magnetic setting - 02 Nos.

VIJ ASSOCIATES

M/s Rahul Traders

khushal constructions

M/s B S Jain

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

Bidder Name

khushal constructions

M/s B S Jain

M/s Rahul Traders

M/s DS Khekde

VIJ ASSOCIATES

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani