Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical 362 INDUSTRIAL AREA PHASE II PANCHKULA HARYANA | PANCHKULA | HARYANA | 133301 | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical E 162 PHASE VII INDUSTRIAL AREA MOHALI | Admitted-Fee/PreQual/Technical |
| 3 | Admitted-Fee/PreQual/Technical 428 INDUSTRIAL AREA PHASE IX MOHALI | Admitted-Fee/PreQual/Technical |
Tender Value
₹14.9 L
EMD Value
₹29,882
Closing Date
1 Sept 2026, 2:00 pmClosed
E.E.C.P.-1
Executive Engineer, C.P. Division No.1, 4th Floor, Deluxe Building Sec 9, Chandigarh
MAINTENANCE OF ROAD IN R-II SUB DIVISION, U.T. CHANDIGARH (PROVIDING AND APPLYING HOT THERMOPLASTIC COMPOUND AND COLD REFLECTIVE ROAD MARKING PAINT)
2026_CHD_95016_1
CP1/2026/2385285
Open Tender
Civil Works - Roads
Percentage
90 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹29,882
7 Sept 2026
25 Aug 2026
1 Sept 2026
25 Aug 2026
1 Sept 2026
25 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and applying of hot thermoplastic compound 2.5mm thick for edge lines, centre lines, stop lines, zebra crossings, letters, numerals, diagonals and chembrons etc. including reflectorising glass beads @250gms. Per Sqm. Area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to level, uniform and free from streks and holes. The thermoplastic compound shall be screeded/extruded on the surface in moltan state by suitable machine capable of controlled preparation and laying of surface application of glass beads at a specific rate. The marking should be capable of resisting deformation by traffic, it should not be slippery when wet and marking shall not deteriorate by contact with sodium chloride, Calcium chloride or oil dropping from traffic. The material shall be free from all skin, dirt and foreign objects and shall comply as per table 800-9 and 800-10 complete in all respect as per Clause 803.4.1 of MORT&H specification (5th revision) and to the entire satisfaction of Engineer-in-Charge. (NS) | 2,200 | Sqm | 377 | ₹8,29,400 |
| 2 | Providing and applying of hot thermoplastic compound 5mm thick for edge lines, centre lines, stop lines, zebra crossings, letters, numerals, diagonals and chembrons etc. including reflectorising glass beads @250gms. Per Sqm. Area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to level, uniform and free from streks and holes. The thermoplastic compound shall be screeded/extruded on the surface in moltan state by suitable machine capable of controlled preparation and laying of surface application of glass beads at a specific rate. The marking should be capable of resisting deformation by traffic, it should not be slippery when wet and marking shall not deteriorate by contact with sodium chloride, Calcium chloride or oil dropping from traffic. The material shall be free from all skin, dirt and foreign objects and shall comply as per table 800-9 and 800-10 complete in all respect as per Clause 803.4.1 of MORT&H specification (5th revision) and to the entire satisfaction of Engineer-in-Charge. (NS) | 200 | Sqm | 729.45 | ₹1,45,890 |
| 3 | Providing and laying of cold applied reflective road marking paint as per IRC 35 using water based road marking material having non-volatile matter contents by weight shall be a minimum of 65%, drop-on glass beads @ 300 grams per square metre with glass beads dispenser, to achieve a DFT of 300 microns, Using automatic airless spray equipment, spray tips and between 2000 and 2500 psi (138 to 172 bar) pressure. The proportion of constituents of paint shall be as per Table 800-11 and gradation requirement for glass beads shall be as per Table 800-12 complete in all respect as per MORT&H specification (5th revision) and to the entire satisfaction of Engineer-in-Charge. (NS) | 2,000 | Sqm | 259.4 | ₹5,18,800 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
cancelled_1.pdf
pdf • 0.07 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.50 MB
BOQ_116631.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .