Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹28.3 LAccepted-AOC | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹38.2 L+₹9.6 L (33.6%)Rejected-AOC | 2 | Rejected-AOC 2nd |
Tender Value
₹38.8 L
EMD Value
₹77,600
Closing Date
8 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
ADDN/ALTN/IMPROVEMENT TO BUILDING NO P-86 AND P-132 AT 7BRD UNDER GE (AF) TUGHLAKABAD
2023_MES_630685_1
GE/TKD-67/2023-24
Open Tender
Civil Works - Others
Item Rate
180 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
9 documents required · 9 mandatory
₹500
GE AF TUGHLAKABAD
₹77,600
Yes
23 Feb 2024
5 Dec 2023
10 Jan 2024
12 Dec 2023
8 Jan 2024
19 Dec 2023
Amount
Taking down of cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water and making the surface clean of all old plaster removing etc. complete all as specified and directed by Engr-in-Charge.
M&L for Dubbing out average 10mm thick on irregular face of walls, chajjas, facia etc and mixed with WPC @ 3% wt of cement (when specifically ordered in writing) in CM (1:4) complete all as specified and directed by Engr-in-Charge. Note: WPC shall be paid separately in respective item.
M&L for 10 mm thick rendering readymix plaster of approved make (as per manufaturer's instruction) on interior wall or concrete surfaces finished even and smooth,without extra cement complete all as specified and directed by Engr-in-Charge.
M&L for 15 mm thick rendering readymix plaster of approved make (as per manufaturers instruction) on exterior wall or concrete surfaces finished even and smooth, without extra cement complete all as specified and directed by Engr-in-Charge. Note:- Quoted rate shall be deemed to be included for work of any height including scaffolding.
M&L for 5 mm thick rendering readymix plaster of approved make (as per manufaturer's instruction) on ceiling wall/concrete surfaces finished even and smooth, without extra cement complete all as specified and directed by Engr-in-Charge.
M&L for two coats of distemper oil emulsion to newly plastered wall surfaces including preparation of surface including 1 mm wall care putty on plaster surface complete all as specified and directed by Engr-in-Charge.
M&L for preparation of walls surfaces and applying a coat of white cement base wall care putty and making surface even and smooth with sand paper and applying two coat of exterior weather proof water base emulsion paint (Apex) in white or tinted complete all as specified and directed by Engr-in-Charge. Note:- Quoted rate shall be deemed to be included for work of any height.
M&L for preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in plinth protection complete all as specified and directed by Engr-in-Charge.
M&L for PCC (1:2:4), type B2 using 40 mm graded stone aggregate as in tank staging laid including finishing the concrete surface even and smooth using extra cement complete all as specified and directed by Engr-in-charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.
Use and waste form work to landing & soffits or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers chajjas including edges for rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge.
M&L for providing reinforced cement concrete (1:2:4), type B1 using 20 mm graded stone aggregate as in chajjas and landing complete all as specified and directed by Engr-in-Charge.
M&L for RCC nominal mix (1:2:4) type B-1 20mm using graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge.
M&L for MS TMT bar of 10 mm dia and over cut to length bent to shape required including cranking bending etc complete & binding with annealed MS wire not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge.
M&L for MS TMT steel bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length bent to shape required including cranking, bending and binding with ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
M&L for making good broken egdes of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 15 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate, with necessary form work/scaffolding, finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from Defence land complete all as specified and directed by Engr-in-Charge.
M&L for 20 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
M&L for non-skid ceramic joint free edge cut coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm set and jointed in neat cement slurry and pointed in colour cement as in floors, complete all as specified and directed by Engr-in-Charge.
M&L for vitrified ceramic tiles 10 mm thick(square/rectangular) joint free edge cut coloured tiles (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, complete all as specified and directed by Engr-in-Charge.
M&L for vitrified ceramic coloured tiles of 10 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings including 10 mm thick rendering in CM (1:4) etc complete all as specified and directed by Engr-in-Charge.
M&L for glazed ceramic coloured tiles 7 to 8 mm thick 450 x 300 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc including 10 mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-charge.
M&L for granite work (black slabs) 18 to 20 mm thick (table rubbed and polished) as in counter slab platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified and directed by Engr-in-charge.
Rounding to the edge of stone slabs on edge complete all as specified and directed by Engr-in-charge.
S&F in repair PVC (SWR) pipes single socketed110 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-charge.
S&F in repair PVC (SWR) bends 110mm dia complete all as specified and directed by Engr-in-Charge.
S&F in repairs tank of three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I 1000 ltr capacity with epoxy coated aluminium rod & high density plastic ball including disconnecting existing tank and providing all necessary fittings for connecting with pipe line complete all as specified and directed by Engr-in-charge.
S&F in repairs tank of three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I 500 ltr capacity with epoxy coated aluminium rod & high density plastic ball including disconnecting existing tank and providing all necessary fittings for connecting with pipe line complete all as specified and directed by Engr-in-charge.
S&F in repairs vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-Charge.
S&F in repairs, urinal half stall vitreous china coloured supplied with PTMT integrated spreader for even flow of water, installed with concealed 'Z' brackets, including brass chromium plated 32mm bore bottle trap, waste coupling complete all as specified and directed by Engr-in-charge.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.
S&F in repairs plastic WC seat cover of any colour for pedestal pan, closed pattern with flat bottom & cover including MS chromium plated, aluminium hinging devices complete all as specified and directed by Engr-in-charge.
S&F in repairs of Health Faucet with 1.25 mtr long flexible SS tube and hook making connection and making good etc complete all as specified and directed by Engr-in-charge. Make :- Prayag/Jagaur/Volga
S&F in repairs of PVC low level flushing cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engr-in-charge.
S&F in repairs of wash hand basin of size 550 x 400 mm vitreous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-charge.
S&F in repairs of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.
S&F in repairs of 15mm bore chromium plated Pillar cock shawn neck type screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repairs of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed by Engr-in-charge.
S&F in repairs of 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.
S&F in repairs of 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engr-in-charge.
S&F in repairs of 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to wall/wall concealed or laid in floors complete all as specified and directed by Engr-in-charge.
Surface preparation by removal existing roof treatment of tar felt treatment/mud fushka/APP Membrane/PCC/Plaster/ and all foreign material such as grass roots dust etc Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc. flushing at junction of parapets complete and removing the dust/mud to the places where directed by Engr-in-Charge.
M&L for plain cement concrete (1:2:4) type B1 using 12.5 mm graded stone aggregate as in roof for maint, the uniform slope etc any thickness at any height and in any position complete all as specified and directed by Engr-in-charge at site.
M&L for 10 mm thick screed bed or bedding layer in cement mortar (1:3) set and jointed in neat cement slurry and on brick work or concrete surfaces finished even and smooth without using extra cement using waterproofing compound complete all as specified. Note :-WPC measured and paid separately.
Supply only water proofing compound complete all as specified and directed by Engr-in-Charge.
M&L for the old roof by making the surface clean thoroughly wire brushed washed, dried up and cleaned of all foreign matter and dust and applying water based UV Resistant elastomeric PU liquid membrane solution minimum two coats over primer coat, as required on ground on area of old broken App membrane/ plastered surfaces using roller upto 2 mm thick as per the manufactures instructions complete all as specified and directed by Engr-in-charge. Make: Shali urethane BTD of STP or equivalent. Note:- Work to be Carried out by authorised applicator as per manufacturer’s instructions.
M&L for providing cement concrete in roof or mud stops using (1:2:4) type B1 using 20 mm graded stone aggregate rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.
S&F in repairs of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-charge.
S&F in repairs of Welded steel wire fabric exc 4 Kg/ Sqm welded to steel section at any position complete all as specified and directed by Engr-in-charge.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified and directed by Engr-in-charge.
Demolition of brick work built in cement mortar complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class 'B' bricks, straight of curved on plan exceeding 6M mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-charge.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (w/out taking off shutters from the frames) complete all as specified and directed by Engr-in-charge.
M&L for anodised aluminium frame for doors, cubical, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-charge.
M&L for powder coated aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified & directed by Engr-in-charge.
S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) doors shutters aluminium section weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two Nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified and directed by Engr-in-charge.
S&F of aluminium die cast door closer hydraulically regulated, designation no-01, universal type suitable for door shutter upto 700 mm in width and of weight not more than 35 kg complete all as specified and directed by Engr-in-charge.
S&F of 12 mm thick Prelaminatd particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge.
M&L for sheet glass ordinary quality 4.00 mm thick and glazing with rubber beading in square exc 0.50 sqm in each panes fixed to window/ventilator frames complete all as specified and directed by Engr-in-charge.
S&F of Anodised aluminium window and ventilator shutters of three track without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays with suitable handle complete all as specified and directed by Engr-in-charge.
S&F of Aluminum Anodized Deko grill MG 104(100mmx105mm) including necessary FUH channel joint cleats screws etc. complete all as specified and directed by Engr-in-charge.
S&F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-charge.
S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge
S&F of 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-in Charge.
S&F of Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-charge.
S&F of Aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-charge.
S&F of Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed by Engr-in-charge.
S&F in repairs of modern design mirror to bathroom size 120 cm length, 90 cm in width and 8-10mm thickness fix to wall by using SS nuts complete all as specified and directed by Engr-in-charge.
S&F in repairs of hangers 6mm dia GI (upto 2000 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed by Engr-in-charge.
S&F in repairs of providing 4-12 mm thick PVC laminate e-board boards including aluminium anodized snap grid frame work for false ceiling size of grid 605 x 605mm thickness of section not less than 0.5mm fixed with steel dash fastener including necessary alternation for fixing electrical fixtures including taking down old false ceiling boards with frame complete all as specified and directed by Engr-in-charge.
Dismantling of plain or corrugated steel galvalume sheet of any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-charge.
S&F of Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Roof/valley gutter/ cladding to wall, fixed with self tapping screws as specified.all joints to be sealed by silicone sealant to the satisfaction of Engr-in charge.
S&F in replacement of pre cast perforated RCC drain cover with frame (rectangular or square) the area of each cover should not be more than 0.5 square mtr and thickness of 60mm each with holes manufactured with M-30 grade of concrete by Vibro Compaction process using accurately designed molds and as suitable reinforced to enable the cover to take load i.e 20 MT for Heavy duty (when tested as per IS-12592) complete all as specified and directed by Engr-in-charge. Make: Terra firma/KK Manual Pvt Ltd/Uttam
S&F in repairs of 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work ply-word board BWP, ( Make: Century ) on wall surface with screws and wooden plugs, pasting decorative laminate type 1.09 mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions over 18 mm thick plywood. Colour and pattern as approved, adhesive as per manufacturer’s instructions. Rate included for removal of all electric fittings and electronic equipments, reaffixing of all electric fittings and electronic equipments on the same position as directed by Engr-in- Charge.
S&F in repairs of locks drawer grade I size 50mm 2levers Brass complete all as specified and directed by Engr-in-charge.
S&F in repairs of Brass handles, cast type polished bright 100mm complete all as specified and directed by Engr-in-charge.
S&F in repairs of Magnetic catcher for wardrobe, cup-boards etc. complete all as specified and directed by Engr-in-charge.
S&F in repairs of Stainless steel Pie cut corner hinge of size not exc 75 mm for doors complete all as specified and directed by Engr-in-charge.
Taking down carefully aluminum point wiring (light/fan/ socket power) complete, including fixture and fitting such as switches, ceiling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.
Taking down main switches/DB's alongwith existing board incl removing the same from site and making the good to the disturbed surface complete all as specified and directed.
Taking down existing sub main wiring of any type and description including removal of teak wood batten/pipe etc complete all as specified and directed.
S&F in replacement for concealed point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable sheathed drawn through and including 20 mm dia PVC conduit with all fitting of medium grade ISI marked duly concealed by cutting chases and making good to match with surrounding including necessary periodicals applying one coat of putty and 2 coats of oil bound distemper along with PVC insulated FRLS copper conductor cable of size 1.5 Sqmm as earth wire connected to common earth dolly suitable for mounting switch including metal flush boxes complete all as specified and as directed by Engr-in-charge for the following points :- Note:- The work includes cutting of chases (wall) and making good disturbed surfaces and quoted rate shall deemed to be included the same item.
One light/fan/fan point controlled by one No piano type switch 5 AMPS single pole one way
One socket point outlet 5/3 pin 5 AMPS controlled by one switch on indipendent board.
One bell/ buzzer point controlled by one switch on indipendent board.
One socket point outlet 5/3 pin 5 amps controlled by one switch on the same board.
All as per item No 4 above but 2.5 sq mm multistranded, PVC insulated sheathed copper conductor cable, and 1.5 sq mm earth continuity conductor in PVC conduit med grade. for 3 pin socket outlet point 15 Amps independent,
S&F in replacement of ceiling rose, 3 phase / PVC/ polycarbonate, isolated body.
S&F in replacement of modular switch 1 way 6A 1 modular complete all as specified and directed.
S&F in replacement of Socket, 6A - 2/3 pin combined 2 modular complete all as specified and directed.
S&F in replacement of modular switch 16 Amps 1 modular complete all as specified and directed.
S&F in replacement of Socket 6A/16A - 2/3 pin combined 2 modular complete all as specified and directed.
M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable sheathed drawn through and including 20 mm dia PVC conduit with all fittings of medium grade ISI marked and making good to match with surrounding including necessary periodicals applying one coat of putty and 2 coats of oil bound distemper along with PVC insulated FRLS copper conductor cable of size 1.5 Sqmm as earth wire connected to common earth dolly suitable for mounting switch including metal flush boxes complete all as specified and as directed by Engr-in-charge for the following points :- Note:- If cutting of chases (is required) and making good disturbed surfaces and quoted rate shall deemed to be included the same item.
One light/fan/fan point controlled by one No piano type switch 5 AMPS single pole one way
One socket point outlet 5/3 pin 5 AMPS controlled by one switch on the same board.
One socket point outlet 5/3 pin 5 AMPS controlled by one switch on indipendent board.
All as per item No 15 above but 2.5 sq mm multistranded, PVC insulated sheathed copper conductor cable, and 1.5 sq mm earth continuity conductor in PVC conduit med grade for 3 pin socket outlet point 15 Amps independent.
S&F in replacement of switch piano flush type 5 Amps single pole one way complete all as specified and directed.
S&F in replacement of socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.
S&F in replacement of switch socket 5 pin 5 Amps flush type complete all as specified and directed.
S&F in replacement of Switch socket combination 3 pin 5A/16 Amp flush type complete all as specified and directed.
M&L in replacement of modular metal flush box for 2 module complete all as specified and directed.
M&L in replacement of modular metal flush box for 3 module complete all as specified and directed.
M&L in replacement of modular metal flush box for 8 module complete all as specified and directed.
M&L in replacement of modular metal flush box for 12 module complete all as specified and directed.
M&L in replacement of modular white cover plate with frame 2 module complete all as specified and directed.
M&L in replacement of modular white cover plate with frame 3 module complete all as specified and directed.
M&L in replacement of modular white cover plate with frame 8 module complete all as specified and directed.
M&L in replacement of modular white cover plate with frame 12 module complete all as specified and directed.
M&L in replacement for concealed sub main of wiring complete with two run of 4 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed drawn through and including 20 mm dia PVC conduit with all fitting medium grade ISI marked duly concealed by cutting chases and making good to match with surrounding including necessary periodicals applying one coat of putty and two coat of oil bound distemper along with PVC insulated FRLS copper conductor cable of size 4 Sqmm as earth wire connected to common earth dolly complete all as specified and directed by Engr-in-charge. Note:- (i) The work include cutting of chases (wall) and making good the disturbed surfaces and quoted rate deemed to be included the same aspect. (ii) One run of conduit with accessories, three runs of 4 Sqmm copper conductor will be measured as one unit of RM.
S&F in replacement of LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed mounted type with high efficiency PMMA diffuser( warm white/white as per requirement) complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S&F in replacement of sheet metal enclosure for MCB DB double door single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type. Make:- Cat No. DHDPSH0DRW08 of Havells/ cat No. 811807 of Indo Asian
S&F in replacement of sheet metal enclosure distribution board with hinged cover IP 43 protection metal door epoxy powder coated/made of insulating material like, ploystyrene, double door 4 way TPN with suitable rated bus bar for (vertical operation) incorporation of MCCB 4 pole 125 Amps 25 KA complete all as specified and directed. Make:- Cat no. DHDLVDRWG0F008 OF HAVELLS/ CAT NO. 811890 OF INDO ASIAN. Note : MCCB's, MCB's, Isolators shall be measured and paid separately.
S&F in replacement of MCB SP 5 to 32 Amps 240 volts complete all as specified and directed.
S&F in replacement of MCB SPN capacity 32 Amps 240 volts complete all as specified and directed.
S&F in replacement of MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed.
S&F in replacement of conduit sub main wiring with two single core PVC insulated of size 6 sqmm unsheathed copper conductor 1100 volt grade multistandard and including drawn through and including non metallic rigid PVC conduit and conduit accessories of 25 mm external dia and conduit accessories of ISI marks medium grade including 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly. Note:- One run of conduit two run of 6 Sq mm copper conductor & one run of 4 sq mm copper conductor is measured as one unit.
S&F in replacement of Earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanized earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 3 and testing on completion including adequate charcoal dust common salt necessary excavation & earth work PCC (1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC (1:2:4) type B-0 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe, Connected to earthing list point complete all as specified and directed.
S&F in replacement of surface/wall mounted LED batten type 4 fit long, polycarbonate housing provided with efficient heat dissipation with polycarbonate diffuser & integrated electronic driver of 20 watts rating suitable for single phase, 230 volts, AC, 50 Hz supply including taking down old batten fittings complete all as specified and directed by Engr-in-Charge. Make- Havells CAT NO-LUMILINEBS20WLED865SPCWH
S&F in replacement of Bell Multi Music type ISI Marked complete all as specified and directed.
S&F in replacement of modular Bell push 6A 1 module complete all as specified and directed.
S&F in replacement of LED tube light fitting 1x10 watt LED (2 ft), LED fitting incl LED Tube 10 watt in cool white, 230 volts energy saving, environmental friendly, long life, impact proof, surface mounting, batten suitable for use single LED tube made out from CRCA sheet steel coated for improper resistance against corrosion with PC Housing in opal finish suitable for wet location with brightness LEDs with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete
Taking down AC of capacity 1.5/2.0 Ton and refixing existing site including top up the gas and making the good to the disturbed surface complete all as specified and directed by Engr-in-Charge.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
Supply and fix single phase PVC wall mounted fan 400 mm sweep 240 volts 50 Hz complete all as specified and directed.
S&F PVC fitment of multi cable and earthing strip transit system of size 30 cm x 30 cm complete all as specified and directed by Engr-in-Charge
S&F PVC fitment of multi cable and earthing strip transit system of size 45 cmx 45 cm complete all as specified and directed by Engr-in-Charge
Taking down supply/return air ducting fabricated made out of GI sheet of 22 gauge thickness with also remove hanging fastener hook, bolt, GI hanging wire, iron strip with 'J' hook etc complete all as specified and directed by Engr-in-Charge.
S&F in replacement of aluminium powder coated grills/diffusers for supply air/return air duct, size 400x400 mm, square type with MS volume control dampers complete all as specified and directed by Engr-in-Charge.
M&L for thermal insulation for ducts with 13 mm thick nitrite rubber insulation complete all as specified and directed by Engr-in-Charge.
M&L for supply/return air ducting size 400x400 mm fabricated made out of GI sheet of 22 gauge of thickness complete all as specified and directed by Engr-in-Charge.
M&L for rolled mild steel as in roof trusses framed, purlin, gantries, rails, fastening and heavy brackets as necessary quality 'A' square cut or notched ordinary and counter sunk forming holes, without any attachment complete all as specified and directed by Engr-in-Charge.
M/S S.K.Electricals
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .