REPAIRS/REPLACEMENT OF WOODEN/STEEL FURNITURE INCLUDING PAINTING TO STEEL FURNITURE AND POLISHING/VARNSHING OF WOODEN FURNITURE AT AF STN PURNEA UNDER GE AF PURNEA

Amount

REPAIR TO CHAIR EASY/CHAIR EASY NF,FD-229 M&L for replacement of broken/damaged front leg of existing size of chair easy with new leg of Ist class hard wood including providing of PVC shoe at the bottom of the legs with screw, complete all as specified and as directed.

All as per item No 1 here-in-before above but rear leg, complete all as specified and as directed.

All as per item No. 1 here-in-before above but side/front/back rail of seat of chair easy of existing size including drilling holes for re-canning, complete all as specified and as directed.

M&L for replacement of broken/damaged wooden arm rest of chair easy of existing size complete all as specified and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to chair easy/chair easy NF complete all as specified and as directed.

REPAIR TO CHAIR DINING,FD-228 Removing /taking out existing unserviceable damaged/broken rear leg and supply and fixing of new rear leg made out of well seasoned 1st class hard wood free form knot, sap wood etc of existing size including providing of PVC shoe at the bottom of the legs with screw, complete all as shown on drg & as directed by Engr-in- Charge.

All as per item No 6 here-in-before above but front leg of existing size, complete all as specified and as directed.

All as per item No 6 here-in-before above but front/back/side rails of existing size, complete all as specified and as directed.

M&L for removing of old broken stiffner and replacing with new stiffner of existing size complete all as specified and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to chair dining complete all as specified and as directed.

REPAIR TO CHAIR WRITING,FD-280 Removing /taking out existing unserviceable damaged/broken rear leg and supply and fixing of new leg made out of well seasoned 1st class hard wood free form knot, sap wood etc of existing size including providing of PVC shoe at the bottom of the legs with screw complete all as specified & directed by Engr-in- Charge.

All as per item No. 11 here-in-before above front leg of exisitng size, complete all as specified and as directed.

All as per item No. 11 here-in-before above but arms of exisitng size, complete all as specified and as directed.

All as per item No. 11 here-in-before above but back/front/side rail of exisitng size including drilling holes for re-caning and finished with french polish complete all as specified and as directed.

M&l for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to chair writing complete all as specified and as directed.

REPAIR TO TABLE DINING 6/8 PERSONS,FD-30(M) Taking out old userviceable top from table dining 6/8 pers and supply and fixing new top of existing size made out of 19/20mm thick, commercial face particle board bonded teak veneered finish of approved quality including Providing 19 x 4mm size 1st class hard wood semi oval shape beading all around complete all as specified and directed and shown on drawing.

M&L for replacement of broken/damaged side long rail of existing size of table dining 6/8 persons with new side long rail of 1st class hard wood and fixing with bamboo nails, complete all as specified and as directed.

M&L for replacement of broken/damaged side short rail of existing size of table dining 6/8 persons with new side short rail of 1st class hard wood and fixing with bamboo nails, complete all as specified and as directed.

M&L for replacement of broken/damaged legs of existing size of table dining 6/8 pers with new leg of 1st class hard wood including providing of PVC shoe at the bottom of the legs with screw, complete all as specified and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to table dining complete all as specified and as directed.

TABLE 3'X2' WITH/WITHOUT DRAWER,FD-41(M),FD-224 Taking out old userviceable top from table 3'X2' and supply and fixing new top made out of 19/20mm thick, commercial face particle board bonded teak veneered finish of approved quality including Providing 19 x 4mm size 1st class hard wood semi oval shape beading all around complete all as specified and directed.

Removing/taking out the existing unserviceable broken legs and S&F of new leg round or square made out of well seasoned 1st class hard wood free from knot, sap wood etc of existing size including providing of PVC shoe at the bottom of the legs with screw. complete all as specified and directed by Engr-in-Charge

All as per item No. 22 here-in-before above but top rail of existing size, complete all as specified and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to table 3'x2' with/without drawer, complete all as specified and as directed.

REPAIR TO TABLE 3'X3',FD-88(M) Taking out old userviceable top from table 3'x3'' and supply and fixing new top made out of 19/20mm thick, commercial face particle board teak veneered finish of approved quality including Providing 19 x 4mm size 1st class hard wood semi oval shape beading all around complete all as specified and directed and shown on drawing

Removing/taking out the existing unserviceable broken legs and S&F new leg of existing size made out of well seasoned1st class hard wood including providing of PVC shoe at the bottom of the legs with screw, complete all as specified and as directed.

All as per item No 26 here-in-before above but top rail made out of well seasoned 1st class hard wood, complete all as specified and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to table 3'x3'. complete all as specified and as directed.

REPAIR TO TABLE PEG,FD-236,FD-266,FD-277,FD-384 Taking out old broken/damaged leg of table peg and S&F new leg made out of well seasoned 1st class teak wood, free from kont, sap wood etc of size 360 x 45x 45mm including Providing PVC shoe at the bottom of the legs fixed with screw, complete all as shown on drg and as specified and as directed.

All as per item No 29 here-in-before above but top rail made out of well seasoned1st class hard wood, complete all as specified and as directed.

Taking out old userviceable top from table peg of size 300 x 450mm and supply and fix new top made out of 19/20mm thick, commercial face particle board teak veneered finish of approved quality including Providing 19 x 4mm size 1st class hard wood semi oval shape beading all around complete all as specified and directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to table Peg, complete all as specified and as directed.

TABLE BED SIDE,FD-245,FD-265,FD-276 Taking out old userviceable top from table bed side and supply and fix new topof existing size made out of 19/20mm thick, commercial face particle board teak veneered finish of approved quality including Providing 19 x 4mm size 1st class hard wood semi oval shape beading all around complete all as specified and directed and shown on drawing.

Taking out broken damaged back plywood from back of table bed side of size 610x450mm and S&F new plywood BWR Gde 6mm thick commercial complete all as specified and as directed.

Taking out broken/damaged leg of table bed side and S&F new legs of size 100x45x45mm made out of well seasoned 1st class hard wood, free from knot, sap wood etc duly fixed with PVC shoe at the bottom of legs with screws. complete all as specified & as directed and shown on drg.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to table bedside, complete all as specified and as directed.

TABLE CENTRE,FD-235 Taking out old userviceable top from table center and S&F new top of existing size made out of 19/20mm thick, commercial face particle board teak veneered finish of approved quality including Providing 19 x 4mm size 1st class hard wood semi oval shape beading all around complete all as specified and directed and shown on drawing.

Taking out old broken/damaged leg of table centre and S&F new leg made out of well seasoned 1st class teak wood, free from kont, sap wood etc of existing size including Providing PVC shoe at the bottom of the legs fixed with screw. complete all as shown on drg and as specified and as directed.

All as per item No 38 here-in-before above but top rail made out of well seasoned1st class hard wood, complete all as specified and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to table bedside, complete all as specified and as directed.

TEAPOY VERANDAH,FD-208 Taking out old userviceable top from teapoy verandah and S&Fnew top of existing size made out of 19/20mm thick, commercial face particle board teak veneered finish of approved quality including Providing 19 x 4mm size 1st class hard wood semi oval shape beading all around complete all as specified and directed.

M&L for one coat of painting with synthetic enamel paint of approved shade to all steel portion of teapoy verndah with/without arms complete after preparation of old painted wooden surfaces by scrapping/rubbing down complete all as specified and as directed.

RE-CANING OF CHAIR M&L for re-canning of chair any type with 2mm wide plastic cane half oval shape to a true shape for general caning as per godrej pattern and 4mm wide plastic cane for bordering around of caning of chair all types, complete all as specified and as directed.

POLISHING TO ALL WOODEN ITEMS OF FURNITURE (Only Polishing) M&L for preparation of old exposed wooden surfaces of chair dining other than those already repaired and polished above by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to chair dining complete all as specified and as directed.

All as per item 44 here-in-before above but chair easy, complete all as specified and as directed.

All as per item 44 here-in-before above but Table Peg, complete all as specified and as directed.

All as per item 44 here-in-before above butTable bedside, complete all as specified and as directed.

All as per item 44 here-in-before above but Table writing, complete all as specified and as directed.

All as per item 44 here-in-before above but chair writing, complete all as specified and as directed.

All as per item 44 here-in-before above but bed Plytop /Bed Hard, complete all as specified and as directed.

All as per item 44 here-in-before above but Table dressing gents, complete all as specified and as directed.

All as per item 44 here-in-before above but Table Dressing Ladies, complete all as specified and as directed.

All as per item 44 here-in-before above but Table Dining, complete all as specified and as directed.

Hat Stand with Mirror FD-23/223 Removing old unserviceable broken looking mirror form Hat Stand and Supply and fixing new approved quality 5 to 6mm thick (plus/minus 5% tolerance) electro copper plated sheet glass mirror of size 460 x 360mm of make Modi/Atul/Saint Gobin duly fixed with wooden frame made of Sheesham wood and 6mm thick commercial plywood including applying two coats of French polish after preparation of surface complete all as specified and directed by Engr-in-Charge.

Bed Plywood Top,FD-246 Removing the old unserviceable head board from bed plywood top, S&F new head board of size 900x660mm made out of 02 nos of vertical of size 60x60x660mm using second class hard wood (vertical shall be shaped as legs of size 60 x60mm at top and 30 x30mm at the bottom) and 2 Nos of stiffeners 40 x60mm (top and bottom round shape) with 75 mm width and 22 mm thick soft wood battens between stiffeners covered with 4mm thick plywood OST exterior grade on both side and 12mm half rounded taak wood beaing round the edges of plywood by providing 2 Nos of 25mm size round head brass screws for MNF set key holes and applying two coats of french polishing etc, complete all as per drawing and as directed.

All as per item No 55 here-in-before above but foot board of bed plywood top of size 900x 500mm, complete all as specified and as directed.

S&F long rail of bed plywood top of size 90x35mm, 1980mm long made from 1st class teack wood and providing brackets made from flat iron -02 Nos of size 35x6mm thick 200mm long on both ends and finishing the exposed wooden surface with french polishing including removing the old unserviceable long rails all as directed and as per drawings,

Removing the old unserviceable pealed plywood from bed plywood top, S&F new plywood commercial type, exterior grade, approved quality of size 1900x900mm 12mm thick on both side complete all as per drawing and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to Bed plywood top, complete all as specified and as directed.

TABLE OFFICE CLERK STEEL-FD 84M Removing of old unserviceable top from Table Office clerk steel and supply and fixing the new top of same size made out of 18/19mm thick pre-laminated particle board teak faced with 4mm thick teak wood beading all-around the table top all as shown on drawing and as directed.

Removing of old unserviceable lock from Table Office clerk steel and supply and fixing new lock with two keys all as shown on drawing and as directed.

Removing of old unserviceable drawer from Table Office clerk steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and applying one coat of synthetic enamel olive green paint with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table Office Clerk steel complete all as directed by Engineer -in-Charge.

S&F in replacement PVC shoes to Office clerk steel complete all as shown on drg and as directed.

Removing of old unserviceable Drawer Box from existing Table Office Clerk Steel and supply and fixing the new Drawer Box of same size and shape made out of 1mm thick MS black Sheet all as shown on drg and applying one coat of synthetic enamel olive green paint with spray painting (Internally and Externally) over a coat of primer after preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

CHARPOY GI PIPE NEWAR/PLYTOP,FD-220 M&L removing old unserviceable nylon newar from charpoy GI pipe and reweaving both side with best quality nylon newar 50mm wide which shall be white/light colour not made out of recycled nylon and weight not less than 1.5 Kgs in each charpoy, complete all as specified and directed by Engineer-in-charge.

Removal of existing newar of Charpoy GI/IP and S & F of two nos of MS Flat iron 40mm X 6mm , 900 mm long and welding on the long rails at 90 degree so as to divide tha long rails into three equal parts, complete all as specified and as directed.

S & F of 12mm thick plywood BWR of approved quality size 1980mm X 900 mm, cutting into correct dimension and rounding at edges to give it a perfect shape with 14 Nos suitable dia and length of nuts and bolts complete all as specified and as directed.

Labour only for drilling holes 14 nos on GI charpoy three on each long rails, two on each short rails and two on the each flat iron welded on the two rails with a suitable drilling machine, complete all as specified and as directed.ge.

S & F GI Elbow 32mm dia heavy duty ISI marked after taking out old U/S GI elbow complete all as specified and as directed.

S&F GI check nut 32 mm size, heavy duty ISI marked after taking out old u/s check nut from charpoy GI pipe, complete all as specified and as directed.

Taking out broken/damaged long rail from charpoy GI pipe and S&F new long rail of charpoy GI pipe 32mm dia med grade, ISI marked including cutting, threading , complete all as specified and as directed.

Taking out broken/damaged short rail from charpoy GI pipe and fixing short rail made out from old pipe including cutting for required size and shape & threading and fixing (old pipe shall be obtained from Ser No 72) complete all as specified and as directed.

Taking out unserviceable legs from charpoy GI pipe and fixing leg made out of old pipe including cutting of required size and shape & threading and fixing (Old pipe shall be obtained from Ser No 72and 73) all as specified and directed by Engineer-in-charge.

REPAIR TO CHAIR VERANDAH FD-236 Removing old unserviceable cane from chair verandah and recaning with new plastic cane 4mm width half round including M&L for painting two coats with white synthetic enamel paint on entire steel/iron surface of chair before recaning and S & F of new hard rubber toes 15mm dia at bottom of legs after taking out old toes, complete all as specified and as directed.

M&L repair to chair verandah by welding (if required) and painting two coat white synthetic enamel paint, complete all as specified and as directed.

REPAIR TO ALMIRAH STEEL LARGE/MEDIUM FD-67(M) M&L for one coat spray painting with synthetic enamel paint of approved shade on almirah steel large internally and externally including shelves & internal locker complete after preparation of old painted steel surfaces by scrapping/rubbing down complete all as specified and as directed.

All as per item No 77 here-in-before above but for Almirah steel medium with shelves, complete all as specified and as directed.

M&L for repairs of legs of almirah steel large by replacing old/damaged legs with 1mm thick MS sheet and fixing the new legs by welding to almirah steel large and applying one coat painting with synthetic enamel paint 1st garde on new legs externally complete after preparation of old/new steel surfaces by scrapping/rubbing down complete all as specified and as directed.

Taking out old unserviceable lock from almirah large/med steel and S&F new lock best quality locally availabe complete all as specified and directed by Engineer-in-charge.

Taking out old unserviceable handle from almirah large/med steel and S&F new one make Godreest quality locally available, complete all as specified and directed by Engineer-in-charge.

REPAIR TO CHAIR CB (FD-75M) Taking out existing unserviceable iron clip flat iron from the chair CB steel with and without arms & supply and fixing 25x3mm thick & 50mm long FI clip by necessary welding to fix the seat and applying two coats of synthetic enamel paint of approved shade over a coat of red oxide primer, complete all as specified and as directed.

M&L for repairs to chair CBA steel with/without arms by replacing broken/damaged seat frame with new 1st class hard wood frame including canning, drilling holes and painting with synthetic enamel paint of approved shade complete all as specified and as directed.

All as per item 83 here-in-before above but back, complete all as specified and as directed.

M&L for one coat of painting with synthetic enamel paint of approved shade to all steel portion of chair CB steel with/without arms complete after preparation of old painted wooden surfaces by scrapping/rubbing down including providing PVC/rubber toes at the bottom of legs and cap on top of tube complete all as specified and as directed.

LOCKER BEDSIDE-FD-1029 M&L for one coat spray painting with synthetic enamel paint of approved shade on bedside locker steel internally and externally including shelves complete after preparation of old painted steel surfaces by scrapping/rubbing down complete all as specified and as directed.

Taking out old unserviceable handle from bedside locker steel and S&F new one of best quality locally available, complete all as specified and directed by Engineer-in-charge.

Table dressing Gents -FD-31M Removing/Taking out existing unserviceable damaged/broken frame of Table Dressing Gents and S & F of Frame made out of well seasoned 1st class hard wood of existing and complete all as specified and as directed.

Removing old unserviceable broken looking mirror form Hat Stand and Supply and fixing new approved quality 5 to 6mm thick (plus/minus 5% tolerance) electro copper plated sheet glass mirror of size 460 x 360mm of make Modi/Atul/Saint Gobin duly fixed with wooden frame, complete all as specified and as directed.

M & L repair to table dressing gents by replacing of broken/damaged back with new 6mm thick commercial plywood BWR typeof existing size and finished with French polish complete all as specified and as directed.

M & L for repairs to drawers of table dressing gents by replacing broken/damaged bottom with new 6mm thick commercial plywood BWR type of existing size including providing suitable knobs complete all as specified and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to table dressing gents, complete all as specified and as directed.

SOFA SET 4/5 SEATER Removing/taking out the existing unserviceable/damaged cushion and S&F new cushion of existing size made out of 100mm thick foam rubber cushion, 40 density (570x540mm) conforming to IS-174-1960 cord type with tapestry cloth cover of shade: approved by GE, make-Sleepwell/ Curl-on. complete all as specified and as directed.

M&L for preparation of old exposed wooden surfaces by scrapping with sand paper and smoothing of surface, filling of bore holes with wooden putty paste rubbing of surface with sand paper till smoothening and polishing to sofa. complete all as specified and as directed.

Chair Computer/Table Computer Removing unserviceable Casters of computer table/chairs and S&F new castors 50mm /existing dia of best quality of existing size, complete all as directed and specified by Engr-in-Charge.

Chair revolving cushioned with arm all type:- M&L for replacement of pedestal assembly of chairs revolving same as existing in chair, complete all as specified and as directed.

M&L for replacement of hydraulic height adjustment base assembly of chair revolving same as existing in chair, complete all as specified and as directed.

M&L for replacement of new arms with polyurethane reinforced with MS insert arms same as existing in chair, complete all as specified and as directed.

M&L for removing the old torn/damaged tapestry cloth/rexine from the seat of the chair and providing the same with tapestry/rexine over a layer of foam(75MM thick, 40 density) same as existing in chair, complete all as specified and as directed. Notes:- The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.

M/s. Mohan Enterprise

MSRAMANUJSINGHSONS