Addn and Altn to MD Accn at Kahikuchi under GE (AF) Borjhar.

Amount

Dismantling of Asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings etc. complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed

Taking down cement plaster in ang description on brick or stone wall etc including racking out joints.hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level .

Taking down chowkhats or frame with shutters (without taking off shutters from frame) each exceeding 1.50 Sqm but not exceeding 4 Sqm each.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as directed by Engineer-in-charge.

Taking down chowkhats or frame exceeding 1.50 Sqm but not exceeding 4 Sqm each.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as directed by Engr-in-Charge.

Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc all as specified and directed by Engr-in-Charge.

Removal of existing water proof treatment of any description including cement plaster carefully from the surfaces cleaning and scrubbing down with water complete all as specified and as directed.

S & F pre-painted color galvalume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F pre-painted color galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, valley gutter etc. fixed with self tapping screws as specified.

M&L False ceiling with 'E' board "Classic" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium snap grid Grid size 605 x 605 mm) frame work for false ceiling to support the boards/tiles including necessary hanging arrangements complete as in repair, all as specified and as directed

M & L for brick work using old size sub class 'B' bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair face of brick work or concrete surface in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. Note : W.P.C. shall be measured and paid separetly.

Supply only integral water proofing compound all as specified and as directed.

M&L for 15 mm thick rendering in CM (1:6) on other than fair face of brick or concrete surfaces finishing even and smooth without using extra cement.

M&L rendering 10 mm thick in CM 1:3 on ceilings finished even and smooth without using extra cement (up to ceiling height of 6 to 7m ) including necessary arrangements for execution of the work) all as specified and directed.

Taking down eaves gutter and rain water pipe (any size or pattern ) incl all fittings, heads, shoes, bends, swan neeks etc incl cleaning or removal to store (measured overall as fixed along the centre line over fitting and accessories).

Demolition and breaking up drain pipes internal dia 110/100 mm (PVC, Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Supply & Fixed PVC (SWR) Pipe 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply & Fixed PVC (SWR) Pipe 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.

Supply & Fixed PVC (SWR) Pipe 75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply & Fixed in repairs PVC (SWR) bends 110 mm bore any radius complete all as specified and as directed.

Supply & Fixed in repairs PVC (SWR) junction single , (single T) 110 mm bore equal or unequal complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), finished smooth and reforming benching for 100mm bore pipe as required and as directed by the Engineer-in-Charge.

M & L for Providing, cement concrete, Type B1, 1:2:4 (20mm aggregate) in roof kerbs or mud stops, padding, rounded or chamfered on edges on existing roof (with proper slope) including preparing of roof slab complete all as directed by Engineer - in - charge .

M & L for water proofing treatment on existing cleaned RCC roof with following specification and manufacturer Instruction complete all as specified as directed. (a) Applying bitumen primer conferming to IS-3384-1986 over the cleaned plaster surfaces as per IS-3067-1966. (b) Applying a layer of APP based polymeric membrane 3.0mm thick (minimum) weighing 3.0 Kilogram per sqm (reinforced with polyster non oven fabric weighing not less than 160 Gmss per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (c) applying one coat of aluminium paint @ 0.10 Litre per Sqm Over APP based Polymeric membrane.

M&L rendering 10 mm thick screed bed on concrete surface in CM (1:4) & water proofing compound mixed with @ 3% finished fair and even. Note : W.P.C. shall be measured and paid separetly.

M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Supply and fixing 2nd class hard wood plain solid straight chowkats and frames,wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and as directed by Engineer-in-charge.

Supply and fixed 125 x 65 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed.

S& F 2nd class hard wood factory made 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, hamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S& F 30mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-charge.

S& F of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge..

S &F for Steel windows with side hung shutters (Glazed and net shutter) including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engr-in-charge. Note: Glass & Wire mesh Shall be measured & paid seperately.

S &F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed by Engr-in-charge. Note: Glass & Wire mesh Shall be measured & paid seperately

S & F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, as in repair complete all as specified and as directed.

S & F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, as in repair complete all as specified and as directed.

Supply & fixing 100mm mild steel butt hinges (medium weight) cold rolled complete all as directed by Engineer-in-charge.

S&F 150mm long aluminium anodised handles (fabricated type) ISI marked (Make : Alans/Classic) complete all as specified and directed by Engr-in-Charge.

S&F 200mm long aluminium anodised tower bolts extruded section, ISI marked (Make : Alans/Classic) complete all as specified and directed by Engr-in-Charge.

S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed by Engr-in-Charge.

M& L for Cutting holes in to brick wall for inserting hold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exceeding half brick but not exceeding full brick.

S & F mild steel work holdfast, cleat etc. for door frame/ wooden batten etc. quality conforming to Fe-290 Gde-E-165 .

S& F as in repairs of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S&F steel glass 3mm thick ordinary quality and glazing with oil putty or wooden beading and securing pins not exceeding 0.50 sqm each panes complete all as specified and directed..

S&F Figured glass, 4mm thick pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply and fix as in repairs, 25 mm dia and CP pipe as in curtain rods with fixing brackats all as specified and directed.

S&F in repairs fancy type metal finish curtain bracket fixed to walls complete all as specified and directed by Engr-in-Charge.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer -in-Charge.

M&L Preparing new plastered surfaces of ceiling and applying three Coats of white wash complete all as specified and as directed.

M&L Preparing new plastered surfaces of wall and applying Two Coats of Distemper Oil Emulsion over a coat of alkali resistant primer and applied over 2 mm thick BIRLA/JK water proof wall care putty complete all as specified and as directed.

Material & labour for preparing new plastered surfaces of walls by washing, rubbing down stopping of painted surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed.

Material & labour for preparing old surfaces of walls by washing, rubbing down stopping of painted surfaces and applying one coat of exterior emulsion paint weather coat, complete all as specified and as directed.

M&L for applying one coat of white wash to old decorated (white washed) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.

M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 2 mm thick BIRLA/JK water proof wall care putty complete all as directed by Engr-in-charge.

M&L for applying one coat of white wash to old decorated (white washed) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge.

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge.

M&L 75 mm thick P.C.C. (1:3:6) type ‘C2’ using 40 mm graded stone aggregate as in plinth protection, foot path etc finished the surface even & smooth without using extra cement all as specified and directed.

Material and Labour for P.C.C (1:3:6) type C-2, using 20 mm graded crushed stone aggregate as in surface channel, drain including providing necessary from work complete all as specified and as directed by the Engineer-in-Charge).

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc completed all as specified and directed.

S&F 18-20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 20mm screed bed in CM (1:6) completed all as directed.

S&F 18-20 mm thick granite slab as in vertical surfaces cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 10mm rendering in CM (1:3) completed all as directed.

Material & labour for machine cut kota stone slab flooring 20-22 mm thick over 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

Material & labour for machine cut kota stone slab flooring , skirting 20-22 mm thick over 10 mm thick rendering in CM (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust all as directed.

Supply and fix non skid ceramic coloured tiles 6 to 7 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 20mm screed bed in 1:6 complete all as directed.

Supply and fix non skid ceramic coloured tiles 6 to 7 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in skirting & dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm mortar in 1:3complete all as directed.

Supply and fix non skid ceramic coloured tiles 6 to 7 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 20mm screed bed in 1:6 complete all as directed.

Material and labour for 300mm X 450mm X 6-7mm thick decorative type wall tiles (coloured) joint free as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed by the Engr-in-Charge.

Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 500 litres and providing necessary connections including dismantling old tanks all as specified and as directed by the Engineer-in-Charge.

M & L cement concrete ( 1: 2:4) type B-1 (20 mm graded aggregate) of 40 mm thick as in platform over roof for PVC tanks finished even and smooth without using extra cement as specified and as directed.

Supply and Fixing PTMT (Poly Tetra Methylene Terepthalate) ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball, screwed for 20 mm bore iron pipe and fixed as directed by the Engineer-in-Charge.

Taking up or down 15 mm bore galvanized iron pipe and connections, as directed by the Engineer-in-Charge.

Taking up or down 20 mm bore galvanized iron pipe and connections, as directed by the Engineer-in-Charge.

Supply and fixing 15 mm bore galvanized iron pipe (medium grade) with all fittings, fixed complete to wall / ceiling or laid in floor all as directed by the Engineer-in-Charge.

Supply and fixing 20 mm bore galvanized iron pipe (medium grade) with all fittings, fixed complete to wall / ceiling or laid in floor all as directed by the Engineer-in-Charge.

Refixing old steel tubing 20 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) all as directed by the Engineer-in-Charge.

Cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good in cement mortar 1:3, cutting not exceeding 10cm girth as specified and directed.

M & L for 15 mm thick cement plaster with in cement sand mortar ( 1:3) mixed with WPC as per manufacturer as in sunken complete all as directed by the Engineer-in-Charge.

M & L for cleaning to concrete / plastered surfaces of sunken slab and applying water proofing treatment in the following courses:- (a) Applying bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 kg per sqm. Per coat. (b) Supplying and laying polythene flim, black, 50 micron laid in floors incl GI spout pipe of size of 40 mm dia and 600 mm long in desired position complete all as directed by the Engineer-in-Charge.

M & L cement concrete (1: 3:6) type C-2, using 40mm graded stone aggregate mixed with WPC as per manufacturer instruction as in sunken floor, surface finished even and fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (coloured) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge.

Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified .

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed.

Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed.

Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed.

Supply and fix, as in repair, 15 mm bore bib taps, fancy type, chromium plated long neck cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fixed fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed .

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed.

S&F in repair vitreous china white flat back wash hand basin of size 550mm x 400mm incl providing 32mm dia CP wasted coupling and making all necessary connections, fixed as directed by Engr-in-Charge.

Supply & fix, as in repairs, brass chromium plated over head shower roses 125 mm size with or without swivel joint, including fixing to steel pipe or union all as specified and direcetd

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repair complete all as specified and as diretced.

S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed.

S&F in repairs, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed.

M & L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as directed by Engineer - in - charge .

S&F in repairs stainless steel round grating 150mm dia complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer complete all as specified.

S&F in repair Stainless Steel Sink with Drainage Board 1.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

M&L Providing PCC 1:4:8 type D2 using 40mm graded stone aggregate 100 nmm thick as in sub base of floors all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed

E/M ITEMS

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for wiring with 1.5 Sqmm FR PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable in and incl rigid PVC conduit concealed /PVC surface conduit with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness hylum laminated sheet , cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm (FRLSH) PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. Note: a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed

All as per item No 110.00 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 110.00 but for one 3 pin 5 Amp socket outlet on same board.

All as per item No 110.00 but bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size all as per specified and directed.

M&L for point wiring with 2.5 sqmm FR PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLSH) (multistranded) PVC insulated and unsheathed Cable as earth wire to common earth dolly, complete all as specified.

M&L for replacement of Bell, AC, 230 volts, 50HZ single pole ISI marked Complete all as specified and directed.

Supply and fixing in repairs of switch piano flush type 240 Volts 6 Amps, SP, one way with White in color complete all as specifed and directed.

M&L for replacement of Switch Bell push, flush type, 5 amp one way SI marked Cat pt No 14123 of anchor complete or its equivalent.

M&L for replacement of 6 Amp, 2-In-1 Socket (IP 20) ISI marked Cat pt No 38320 of anchor or its equivalent

Supply and fixing in repairs of switch socket outlet combination 5 Pin, 6 Amps, 240 volts flush type (non shuttered) with white in color complete all as specified and directed.

Supply and fixing in repairs of switch socket out let combination multipurpose 3 pin, 6/16 Amps and (with 3 pin 6 Amps outlet also) flush type (non shuttered) with white in color complete all as specified directed.

Material and labour for replacement of 100W Deluxe Fan Regulator with 5 step speed control ISI marked with white in color complete all as specified and directed by Engr-in-charge

Material and labour for replacement of ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block, 6A, Pilot 2 Plate with white in color complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs of LED fitting 1x16 watts including 4 feet long Tube rod, 230 Volts, bi-pin holders connector block etc. complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.

Supply and fixing in repairs of LED fitting 1x10 watts including 2 Feet long Tube rod, 230 Volts, bi-pin holders connector block etc. complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.

Supply and fixing in repairs Aesthetically designed wall bracket light with Brushed Nickel metallic body with glass outer cover with B22d electric bulb & E27 lamp holder from ceiling rose to light fitting complete all as specified and directed. Make : Havells/ Philips/Wipro or equivalent make as approved

S & F in repairs of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix in repairs of MCB SPN DB 8 way double door, glazed type, IP 43 protection,Glazed door, isolated neutral bar, insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed. Make : Legrand / Indo asian / Havells or its equivalent in specified makes in CA.

Supply and fix in repairs of MCCB TPN DB 4 way double door, IP 43 protection, Glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, complete all as specified and directed.

Supply and fix in repairs of MCCB 100 Amps, 4Pole, 16 Ka, 415 volts complete all as specified and directed.

Supply & fix in repairs of MCBs single pole (SPN) 6 to 32 Amps with 10 KA breaking capacity of 'C' Curve in distribution boards confirming to IS/IEC 60898-1 (ISI merked) complete all as specified and directed.

Supply & fix in repairs of MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' Curve in distribution boards confirming to IS/IEC 60898-1 (ISI merked) complete all as specified and directed.

M&L in replacement for Type 1+2 AC Surge Protection Device TP+N (4 Pole) 320 volt, 20-50KA, Protection against direct and indirect lightning surges, Maximum Discharge Current - Imax up to 100kA and Conforms to IEC 61643-11 all as directed by Engr-in-Charge.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Make: KEI/Havells/Anchor/polycab Note : (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Material & labour in replacement of Sub main wiring with two runs of single core 1.5 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh into PVC non metallic rigid conduit concealeed including PVC insulated stranded copper conductor nominal cross section area as under as contineous earth continuity wire complete all as specified. Two run of 1.5 Sqmm cable one run of 1.5 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

M&L in replacement of Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. Note: The rate quoted include cost of min 7.5 metre earthing wire.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre,horizontal type, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

S&F 15 mm bore Gun-metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engr-in -Charge.

M&L galvanised steel water tubing medium grade of 15 mm bore with &including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engr-in-Charge.

Supply and fix Bib taps 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Excavating in trenches manually not exceeding 1.5m wide and not exceeding1.5 mtr in depth/ width for laying under ground cable / foundations and getting out in soft / loose soil all as specified and directed. Note: During excavation no mechanical excavator is permitted at site, contractor will do the excavation through maually.

Returning, filling in incl spreading, leveling, watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing of surplus excavating material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

M&L for sand cushioning for protection of lT under ground cable with screen wash sand and punning to proper reqd cover all as specified and directed.

M & L brick protection with old size sub class ‘B’ brick for PVC under ground cable protection in trench with width equal to length of brick laid dry and flat joining each other with gap between adjacent brick not exceeding 10mm over LT under ground cable all as specified and directed.

M&L in replacement of UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor, 1100 Volts grade, cross section area including taking down of size 35.0 sq mm 3.5 core complete all as directed.

Supply & fix 40 mm bore GI tubing “light grade” in trenches/ on pole for protection of cables complete all as specified & directed.

M&L Hot water pipe (ISI Marked) duly insulated with glass wool and aluminium cladding 15 mm bore.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, frame and louvers.

Supply and fixing all in one comprising of high efficiency LEDs (120 lm/W), solar street Light with luminaire wattage 24/25W, High Efficiency Mono Crystalline Solar PV Module 12V 50W, lithium Ferro phosphate battery 12.8V 24Ah with inbuilt BMS technology, high efficiency LED >93%, MPPT solar charge controller and aluminium extruded body, specially designed intelligent microwave sensor to control the dimming nad brightness of light leads to extend working time and 5 mtr long octagonal pole (type CPT-5030) top dia 70 mm bottom dia 130 mm sheet thickness 3 mm including base plate of size (L x B x T) 200 x 200 x 12 mm, bolt size 4 x 16 mm dia and bolt length 450 mm, suitable Excavation work and PCC work as recommended by manufacturer will be included in this job. Make: Havells/Wipro/Philips or equivalent make specified in CA.

R. D. ENTERPRISE (BID ID -3072803)

Ms N D Enterpise (BID ID -3072971)

Anupam Das (BID ID -3080309)

KUNDAN ENGINEERS AND BUILDERS (BID ID -3081673)

M/s Priyanka Construction (BID ID -3072823)

M/s Rawat Enterprises (BID ID -3073536)