WORK SERVICES FOR PROVISION OF TOILET AT CERTAIN LOCATION AND WORK SERVICES FOR PROVISION OF ADDITIONAL FLAME PROOF AIR CONDITIONERS IN EAX LOCKUP AT 31 WING AF UNDER GE AF PANAGARH

Amount

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out soft/loose soil complete all as specified.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in foundation, filling and mass concrete complete all as specified.

Material and labour for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius,built in cement mortar (1:6), complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:1.5:3 (nominal mix) type A1 20 mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. Note:- Reinforcement and form work shall be measured and paid including this item.

Material and labour for reinforced cement concrete 1:1.5:3 (nominal mix) type A1 20 mm graded crushed stone aggregates as in beams, cantilevers, bressummers, lintels complete all as specified. Note:- Reinforcement and form work shall be measured and paid including this item.

Material and labour for formwork to sides of rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

Material and labour for formwork to sides and soffits of rough finished flat surfaces of concrete floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Material and labour for 20 mm thick rendering in cement mortar 1:4 in two layers (12 mm +8 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC on second layer (8 mm) as per manufacturer instruction complete all as specified. Note: LWPC shall be measured and paid including this item

Supply only liquid water proofing compound as per manufacturer instruction.

Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of cement primer complete all as specified.

Material and labour for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of primer and 3 mm thick wall care putty complete all as specified.

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall or Eaves board, fixed with self tapping screws including washers complete all as specified.

Material and labour for preparation of new and previously untreated steel or iron surfaces of any description, not otherwise described not exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified.

Material and labour for for suspended false ceiling using grid 180 GSM (exposed ceiling suspension system ) of grid size 605 mm x 605 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure steel Non Asbestos Fibre Cement decorative Board in a grid of powder coated GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1210 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1210 mm cross tee to be interlocked between main runners @ 605 mm c/c,so as to form 600 mm x 600 mm grid complete all as specified . Make: Everest/ Lafarge/ Armstrong

Material and labour for Hardcore of broken boulder or stone gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for 75 mm thick PCC 1:4:8, type D2 with using 40 mm graded stone aggregate as in sub base of floor rough finished to receive next layer complete all as specified.

Material and labour for 100 mm thick PCC 1:2:4, type B1 using 20 mm graded crushed stone aggregates as in floors finished the surfaces even and rough complete all as specified.

Material and labour for polythene film, 100 micron thick, laid on a coat of bitumen primer @ 0.50 kg per sqm complete all as specified.

Material and labour for sand filling under floor or in foundations including watering and consolidation as specified.

Material and labour for 75 mm thick PCC 1:3:6, type C2 using 40 mm graded crushed stone aggregates as in plinth protection laid to slope 1:12 and finished the surface even and smooth without using extra cement complete all as specified.

Returning, filling in, trenches including Spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified.

Removing of surplus soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.50 metre above the starting point all as directed by Engr-In-Charge.

Supply and fix steel windows or ventilators, fixed type, with glazing bars complete all as specified.

Supply and fix 4 mm thick frosted sheet glass, ordinary quality and glazing, with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified. Make: SAINT GOBAIN GLASS / MODIGUARD / HINDUSTHAN PILKINGTON

Material and labour for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified.

Material and labour for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified.

Material and labour for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified.

Material and labour for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified.

Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification .

Supply and fix bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Supply and fix 150 mm long aluminium alloy handles, cast type, anodized all as specified.

Supply and fix 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

Supply and fix 100 mm long mild steel, Butt hinges, complete all as specified.

Supply and fix 150 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified. Make: Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix 100 mm bore traps ‘P’ or ‘S’ complete all as specified. Make: Jindal/ Tata Metalic/ Jai Balaji Industries

Supply and fix 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all necessary clamps,bends etc. complete all as specified. Make: Jindal/ Tata Metalic/ Jai Balaji Industries Note:- Bend and junction should be measured and paid on separate item

Supply only 75 mm bore cast iron bend. Make: Jindal/ Tata Metalic/ Jai Balaji Industries

Material and labour for 100 mm x 100 mm salt-glazed stoneware gully traps, square or round mouthed, type 'S' complete all as specified.

Material and labour for 7 mm thick joint free premium quality glazed ceramic colour tiles of size 450 mm x 350 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 300 mm x 300 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply and fix 15 mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. Make Parryware / Jaquar / Marc

Supply and fix 15 mm bore single lever angular Stop valves with wall flange, with all fittings complete as per manufacturer instruction. Make:- Jaquar/ Johnson / Cera/ Marc

Supply and fix 15 mm bore CP pillar tap, quarter turn concealed type with aerator complete as per manufacturer instruction. Make:- Jaquar/ Parryware/ Cera / Marc

Supply and fix toilet paper holder as per manufacturer instruction. Make:- Jaquar/ Parryware/ Cera / Marc

Supply and fix corner wall glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified. Make: Prayag Polymer Pvt. Ltd./ Parryware/ Blue Star & Silver Shine

Supply and fix as in repairs Vitreous China wash down water closet pan (pedestal pattern) , white including fixing bolts, including flushing cistern but including flush pipe plastic water closet seat white including jet spray, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices and also including 'P' or 'S' trap complete all as specified. Make of Pan, Flushing cistern, Seat cover, jet spray and trap Jaquar/ Parryware/ Cera / Marc

Supply and fix as in repairs, Vitreous Cliina wash basin, wliile, flat back, size 550 mm x 400 mm including CI brackets, stand, waste coupling, 32 mm dia LDPE waste pipe of pressure rating 4 kgf/ sqcm , 15 mm bore long neck fancy type CP pillar tap and 15 mm size 450 mm long PVC connection including 15 mm bore CP stop valve complete all as specified. Make of basin Jaquar/ Parryware/ Cera / Marc Make of tap/valve Parryware/ Jaquar/ Marc Make of PVC Item Prayag/ Supreme/ Prince

Supply and fix as in repair vitreous China urinals, without sensor flushing valve, with all fixing accessories as per manufacturer instruction, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including brass screws, pointing around urinal back in cement. Make: Jaquar/ Parryware/ Cera / Marc

Supply and fix as in repair frameless bathroom mirror of size 600 mm x 450 mm x 5 mm, cerium oxide polish mounted on 9 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as per manufacturer instruction. Make: Sant Gobain/ Modiguard/ Prayag

Supply and fix as in repairs PVC grating doom 140 mm dia with waste hole (Minimum weight 50gms) complete all as specified. Make:-Blue Star & Silver Shine/ Prayag Polymer Pvt. Ltd./ Polytuff

Supply and fix as in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified. Make: Prayag Polymer Pvt. Ltd./ Parryware/ Blue Star & Silver Shine

Supply and fix as in repairs 20 mm dia brass chromium plated tubular towel rail and 600 mm long with brackets, complete all as specified. Make:-Jaquar/ Parryware/ Cera / Marc

Supply and fix as in repairs 20 mm dia anodised aluminium alloy harrison rails, with fixing brackets,stops, rollers etc. complete all as specified. Make:-Jaquar/ Cera/ Blue Star & Silver Shine

Supply and fix as in repairs CP health faucet with 1 mtr tube and hook including all fittings as per manufacturer instruction. Make: Jaquar/ Parryware/ Cera / Marc

Supply and fix CP pegset of three of fancy type as per manufacturer instruction.

Material and labour for Providing reinforced precast cement concrete 1:1.5:3 type A1 as in cover slabs and similar articles with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match Set in cement mortar 1:4 complete all as directed by the Engr-in-Charge. Note: Reinforcement will be measured and paid including this item

Material and labour for cutting 150 mm bore salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 and forming bench / channel in cement concrete 1:2:4 type B1 20 mm graded crushed stone aggregates finished the surface even and smooth complete all as specified.

Material and labour for point wiring with 1.50 Sqmm PVC insulated un sheatned multi stranded copper conductor cable (FRLSH) 1100 volts grade two single core conforming to IS-694-1990 and one run of continious earth wire with 1.50 Sqmm PVC insulated unsheatned stranded copper conductor cable (FRLSH) draw in and including heavy duty 20 mm dia PVC conduit (ISI marked) in concealed with all necessary fittings and fixures with GI sunken boxes with earth dolly and 3 mm laminated cover sheet suitable for fixing switch, socket, regulator, fan point, exhaust fan point etc. including making good disturbed surface with CM (1:4) to match with the existing surface complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for conduit, cover plate and box of suitable module, cutting chases of wall, making good disturbed wall. Make: Havells(ISI Marked)/ Finolex(ISI Marked)/ KEI(ISI Marked)

All as per Item No 66 here in above but for One light/ one fan point controlled by one switch Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

All as per Item No 66 here in above but for 5 pin socket outlet 6 Amp socket point (Independent board) Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

All as per Item No 66 here in above but for one 5 pin socket outlet 6 Amp socket point (same board) Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

All as per item No.66 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 marked for 5 pin, 16 Amp socket outlet, independent, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Make: Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

Supply and fix Modular switch 1 way 10 A, 1 module complete all as specified. Make: Havells (Crabtree)/ Schneider/ Legrand

Supply and fix Modular switch 1 way 16 A, 1 module complete all as specified. Make: Havells (Crabtree)/ Schneider/ Legrand

Supply and fix Modular shutter socket, 10 A - 3/5 pin 2 module complete all as specified. Make: Havells (Crabtree)/ Schneider/ Legrand

Supply and fix Modular shutter socket, 10/20 A - 3/5 pin 3 module complete all as specified. Make: Havells (Crabtree)/ Schneider/ Legrand

Supply and fix ceiling rose surface baklite with three terminals 240 V. Make: Havells/Legrand/Schneider

Supply and fixing sub-main wiring with PVC insulated & unsheathed four run of 6.00 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith two run of 4.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 25 mm PVC conduit complete all as specified. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked)

Supply and fix sheet metal enclosure MCB DB SPN with 200 Amp rated bus bar 4 ways 415 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: Hager / Siemens/ Schneider/ C&S Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix MCB SP 240 volts, 50 Hz capacity 6-32 Amps 'C' curve all as specified. Make: Hager / Siemens/ Schneider/ C&S

Supply and fix MCB SPN 240 volts, 50 Hz capacity 40 Amps 'C' curve all as specified. Make: Hager / Siemens/ Schneider/ C&S

Supply and fix 18-20 W LED T8 tube with extruded Al body, PC diffuser and inbuilt driver Double sided connection and all accessores complete all as specifed and directed. Make:- Bajaj Cat No- BLRB 18W LED/ Havells LED Item Description LUMILINEPLUSBS20WLED865SPCSS/ Crompton Cat No LTT8-20 Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted to the Engineer-In-Charge for LED light fittings (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to Engineer-In-Charge (c) LED light fitting and drivers shall be of same make.

Supply and fix exhaust fan 250 mm sweep PVC body with louvers complete all as specified Make :USHA (ISI Marked) /Bajaj (ISI Marked) / Crompton (ISI Marked) /Havells (ISI Marked)

Supply and fix geyser 25 ltr PVC body 5 star rating with copper coil 240 V 50 Hz. Make :Jaquar/ Usha/ Bajaj

Supply and fix modular white cover plate with frame, 2 module complete all as specified. Make: Havells (Crabtree)/ Schneider/ Legrand

Supply and fix modular white cover plate with frame, 3 module complete all as specified. Make: Havells (Crabtree)/ Schneider/ Legrand

Supply and fix modular white cover plate with frame, 6 module complete all as specified. Make: Havells (Crabtree)/ Schneider/ Legrand

Supply and fixing LED mirror tube light fitting with high out put up 2 feet 10 W 220 V AC decorative type with driver connecting with 3 core 1.5 sqmm flexible copper conductor cable Make:- Bajaj / Havells / Crompton Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted to the Engineer-In-Charge for LED light fittings (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to Engineer-In-Charge (c) LED light fitting and drivers shall be of same make.

Material and labour for concealed point wiring for circuit/ submain wiring alongwith earth wire with the following size FRLSH is PVC insulated copper conductor, single core cable in drawn in steel conduit complete all as specified (i) 2 core 4 sqmm (ii) 1 core 2.5 sqmm :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for conduit, cover plate and box of suitable module, cutting chases of wall, making good disturbed wall. Make: Havells(ISI Marked)/ Finolex(ISI Marked)/ KEI(ISI Marked)

Supply and fix switch socket and plug combination in LM6, 16 A 250 V, 2P+Earth flame proof rotary type with termination box in LM-6, 16 A single pole 250 V. Make: Sudhir Flameproof/ Shyam Flame proof / Matrix Electical Switch Ltd.

Supply and Fix Window mounting (split type) air Conditioners fitted with hermitically sealed compressor operating on refrigeration R-22 suitable for 230V, I 10% 50 Hz single phase AC supply, suitable or 1.5 TR window mounting with Flameproof Motor, Certified with CMRI Dhanbad for gas group IIA & IIB, cooling coils, will kept in the flameproof area.2nd Unit Compressor and Flameproof motor & condensor will be kept in Side the flameproof area, for this separate Angle and flame to be fabricated by the Contractor. Note: Cost of Installation and necessary Angle iron frame shall be included in the quoted rate. Make: Sudhir Flameproof/ Shyam Flame proof / Matrix Electical Switch Ltd.

Supply and fix weather proof, flame proof Voltage Stabiizer for 1.5 TR split type approved by CMRI Dhanbad all as per manufacturer instruction. Make : Sudhir Flameproof / Shyam Flame proof / Matrix Electical Switch Ltd.

Supply and fix Flameproof Timer with Contactor not less than 32 Amp Single phase ideal for time-based control in hazardous environments. Housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA & IIB with IP65 rating, completely dust proof and have a good level of protection against water.with non-volatile memory to save programmed functions and retain elapsed time until they are turned on again with indication through the tough glass of the enclosure, on-site programming for a wide range of inputs and a variety of control modes, suitable to control ON/OFF programming of 1.5TR AirConditioners all as per manufacturer instruction and make as approved by GE

M/s S A TRADING

HIGH HILLS INFRA

ROY ENTERPRISE