PROVN OF TENSILE FABRIC STRUCTURE FABRICATION ERECTION AND FABRIC INSTLN AND OTHER ALLIED WKS AT VIJAY SMARAK AT FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

M&L for brick work with flyash old size bricks straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L 15 mm thick cement plaster in CM (1:4) on fair faces of brick work incl finished even and smooth without using extra cement complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25cm in soft loose soil complete all as specified and directed.

Removing excavated soils to a distance exceeding 1.5 kilometers but not exceeding 5 Kilometers and depositing where directed, complete all as specified and directed.

M & L for plain cement concrete (1:4:8) type D2 using 40 mm graded aggregates in foundation filling and mass concrete complete all as specified and directed.

Material and labour for providing Plain Cement Concrete (1:3:6) type C2 using 40mm graded aggregate as in foundation, filling and mass concrete all as specified and directed.

Material and labour for Plain Cement Concrete (1:2:4) type B0 using 12.50 mm graded stone aggregate as in copping including weathering slightly rounded or chamfered angles and throating all as specified and directed.

M&L for RCC type A1 nominal mix (1:1½:3) using 20 mm graded aggregates in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns up to plinth beam or up to Ground level etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid separately).

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

M&L for Mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and directed.

S&F mild steel screw bolts neck dia 10 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm but n exc 30 cm long complete all as specified and directed

Use and waste of from work to sides of concrete for foundations, Footings, bases of cols and Plinth beams and similar work for rough finished surfaces complete all as specified and directed.

S & F ornamental MS framed work such as grills, gate, gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways, railing, conforming to Fe-290, Gde-E-165,including, complete all as specified and as directed.

M & L Providing precast reinforced cement concrete RCPC drain cover 100 mm thick of size 600mm x 450 mm as in drain cover with capacity 3MTcomplete all as specified and directed.

S&F tensile fabric structure ( any type of curve design , cantilever , conical etc as approved design ) of mild steel tubular frame with red oxide coating over two coat of milky synthetic enamle white paint on complete structure with fabrication and erection and 900 Gsm fabric installation over structure complete as specified and directed. ( Make : Fabric - Ferrari / S.R.F or equivalent ) ( Note : Erection and fixing of structure at any height will include hydra or equvalent type of machines , and will be provided by contractor) Note : Scope of work and technical specification of structure and fabric shall as per Particular Specification Clause No 29.

Removing excavated soils to a distance exceeding 250 mtr but not exceeding 500 mtr and depositing where directed, complete all as specified and directed.

MODERN AGENCY

Shanti Construction Company

Tirupati Buildcon Pvt. Ltd.

HYDROTEC

RADHA ENTERPRISE

AZIM ENTERPRISES

M/S SRINIVASA CONSTRUCTION

Shree Mahabir Builders