Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
12 Jul 2024, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ADITI MISHRA
Sangrur TOP, Bharat Petroleum Corporation Limited
REQUEST FOR QUOTATION CRFQ - 1000420374 LIMITED TENDER FOR RE-CARPETING OF BITUMEN LICENSED AREA AT SANGRUR TOP BPCL Invites quotations for the LIMITED TENDER FOR RE-CARPETING OF BITUMEN ROADS IN LICENSED AREA AT SANGRUR TOP from the BPCL registered under civil category & keen to work at above mentioned site ISSUED BY:- BHARAT PETROLEUM CORPORATION LIMITED, Location Incharge Sangrur TOP
16938
1000420374
Limited Tender
Works
Sangrur TOP
15 Jul 2024
2 Jul 2024
12 Jul 2024
2 Jul 2024
12 Jul 2024
2 Jul 2024
5 Jul 2024 - 5 Jul 2024
PRICE BID DOCUMENT: E-TENDER FOR ROAD RECARPETIG WORK AT SANGRUR TOP
Instruction to fill this sheet: Please enter rate line item wise in highlighted cells & upload along with your bid. Lot wise total rates will be considered for L1 Selection
Job description | Quantity | Unit of Measurement | Quoted Amount (per UOM) excluding GST (For eg. Rs. X per Sqm) in INR | Total Quoted Amount excluding GST in INR
Tack Coat work: should be applied with following conditions (supply to be done by contractor only, nomaterial shall be issued by BPCL):
i. Temperature of Air should be greater than 5º C.ii. Emulsified asphalt for tack coat shall be diluted with an equal amount of potable water ay a temp between 10º C and 39º C. iii. The mixture is kept as it is for atleast 15 minutes before using.iv. The prepared mixture must be used within 48 hours of dilution v. Tack coat (light application of asphalt emulsion between hot mix asphalt layers designed to
create a strong adhesive bond without slippage ) - Bitumen shall be heated to a temperature 52º C as specified for the grade 60/70 used and maintained at that temperature for the specified duration -15 mins (even for premix & seal coat bitumen should be heated as specified above).The tack coat shall be applied evenly using 0.5 Kg/sq. m of bitumen over-cleaned/dry surface by means of pressure distributor/sprayer or any other means.vi. The binder shall be applied longitudinally along the length of the road & never across it.
vii. Generally, emulsions appear as a thick brown liquid when initially applied. When the asphalt cement starts to adhere to the surrounding material (aggregate, existing surface, subgrade, etc.)the color changes from brown to black and the emulsion is said to have “broken”. As water begins to evaporate, the emulsion begins to behave more and more like pure asphalt cement.Once all the water has evaporated, the emulsion is said to have “set”. The time required to break and set depends upon the type of emulsion, the application rate, the temperature of the surface onto which it is applied and environmental conditions. Under most circumstances, an
emulsion will set in about 1 to 2 hours. Rates include cost of allmaterial,labour,equipment, tools, tackles etc. | 7800 | M2 |
Following is the scope of work for service line item:
ROAD WORK PREMIX 25MM
At certain places, some patches are there in licensed area which needs repair before recarpeting. Work includes removing the loose and defective materials by cutting rectangular patches to min. depth of 50 mm & Fill Water Bound Macadam (WBM) in the rectangular having min. 50 mm depth.Then, Cleaning the existing surface with a wire brush & removing all loose aggregate & traces of fine dust which get accumulated. While brushing, fine dust shall be removed from the surface by blowing with a gunny bag or any other means as approved by the engineer. Above work to be completed before application of tack coat.Spreading Bitumen/ pre-mix carpet surfacing with 2.25cubic metre per 100sqm. And 50-56 kg of hot bitumen per cubic metre of stone chippings of 13.2mm and 11.2 mm size respectively to a minimum final height of 25 mm. Stone aggregate shall be mixed with bitumen(grade 80/100). Mixing with solvent should be at the rates of 70 grams per kg of asphalt with pavingasphalt 80/100.i. Premix carpet spreading shall be done evenly to obtain a uniform surface. (supply to be done bycontractor only, no material shall be issued by BPCLii. Road surface shall be compacted by 10-ton roller immediately after spreading the premix.iii. Rolling shall be started at edges & worked towards the centre.iv. Each pass of roller shall uniformly overlap not less than 1/3rd of the track made by earlier pass.Usually 5-6 runs shall be made for compacting surface. Along curbs manholes & all other placesnot accessible to the roller shall be compacted by means of steel rammers.Rates include cost of allmaterial,labour,equipment, tools, tackles etc. | 7800 | M2 |
ROAD WORK: Seal Coat: supplying seal coat using sand/6mm gritprecoated with bitumen & bitumen should be thoroughlymixed to have uniform mix. The rolling shall be done asexplained above. Rates include cost of allmaterial,labour,equipment etc. complete.12mm seal coat with bitumen 1Kg/Sqm | 7800 | M2 |
Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains,fillings, non-suspended floors, pavements & ramps or any other works etc.including the cost ofposition cement concrete of specified grade including the cost ofcentring and shuttering, tamping, ramming, vibrating,curing, in anyshape,position,thickness and finishing the top surface rough or smooth,etc. all complete as per directions of Engineer-in-charge. - All work upto plinth level 1:2:4 (1 Cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Providing Plain cement Concrete work at areas where cabling work etc. is done along the breadth of the road. Rates include cost of all material,labour,equipment, tools, tackles etc. | 10 | M3 |
Removing & Refixing Kerb stone along with supply of finished Kerb stones of same dimensions if few/more kerb stones breaks during the process of removal & refixing to ensure level of 30cm above the road level. | 1 | LS |
TOTAL QUOTED AMOUNT |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
16938.zip
zip • 8.97 MB
BUDGETDOC_16938.xlsx
xlsx • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .