CWE/CHD-89/2020-21 MAINT OF ROOF, TILE, PLUMBING, FALSE CEILING PLASTERING, LEAKAGE/ SEEPAGE, PVC WATER TANKS AND MISC B/R WORKS FOR OR AND KEY PERSONS ACCN AT MIL STN NAHAN

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces , finished even and fair without using extra cement on walls in cement mortar1:4, (using WPC) complete all as specified and as directed. Note:- WPC shall be measured and paid seprately.

Rendering 15 mm thick on brick work or concrete surfaces, finished even and smooth without using extra cement on walls in cement mortar 1:6, in patches complete all as specified and as directed.

M&L Rendering 10 mm thick cement plaster in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of exterior grade acrylic emulsion paint over a coat of primer and over and including layer not less than 1.0mm thick of wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of acrylic distemper/ distemper oil emulsion (OBD) over and including 2mm thick wall care putty in any pattern complete all as specified and as directed.

M&L for preparation and applying three coats of white wash on new surfaces of ceiling complete all as specified and as directed.

M&L for preparation and applying one coat of white wash on old wall surfaces complete all as specified and as directed.

M&L for preparation and applying one coat of white wash on ceiling old surfaces complete all as specified and as directed.

M&L for preparation and applying one coat of cement base paint on old wall surfaces including wetting and curing, complete all as specified and as directed.

M&L for preparation and applying one coat of exterior grade acrylic emulsion paint on old wall surfaces in any pattern complete all as specified and as directed.

M&L for preparation and applying two coats of cement base paint on old wall surfaces after complete removed of existing treament including wetting and curing, complete all as specified and as directed.

M&L for preparation and applying one coat of acrylic distemper/ distemper oil emulsion (OBD) on old wall/ceiling surfaces complete all as specified and in any pattern as directed.

All as per items as per Ser No 13 here-in-before but on ceiling complete all as specified and as directed..

M&L for preparation and applying two coats of acrylic distemper/ distemper oil emulsion (OBD) on wall surfaces with and including a coat of primer and thin layer of 2mm thick wall care putty incl complete removal of existing treatment complete all as specified and as directed.

All as per items as per Ser No 15 here-in-before but on ceiling complete all as specified and as directed.

M&L for preparation and applying one coat of synthetic enamel paint over old painted wooden or wood based surfaces of any description, not otherwise described over 10 cm width or girth, complete all as specified and as directed.

M&L for preparation and applying one coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, complete all as specified and as directed.

M&L for preparation and applying one coat of synthetic enamel paint over steel & iron surfaces of any description, not exceeding 10 cm in width or girth, unconnected with other painting or when painted in different tint complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

S & F in repair vitreous China wash basin, (white) Flat back, size 550x400 mm including cast iron brackets, PTMT waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repair vitreous China Squatting pan, 'orrisa pattern, size 580x440 mm (white) with integral foot rests with and including 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair (centre hole mixer), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair Sink mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm dia bib taps CP brass,fancy type,long body, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm dia Angle cock chromium plated brass fancy type, screwed down , high pressure, scrwed both ends for iron pipe complete all as specified and directed.

S&F in repair cast iron Nahani trap(dia of outlet 75 mm), with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F Continuous (piano) hinges 30 mm wide , mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F 100 mm Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 4mm sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

All as per item 31 here-in-before above but fixed in repair complete all as specified and directed.

S & F in repair 17-18mm thick HDHMR board, high density, water and termite, boer and fungus resistant, laminated both side fixed with screws to timber frame work as in cupboard shelves, shutters, bathroom doors, kitchen cabinets etc complete all as specified and directed.

S & F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed stainless steel wire staples complete all as specified and directed.

All as per item No 34 here-in-before but fixed in repair complete all as specified and directed.

Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L 15mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors complete all as specified and directed.

M&L 20mm dia GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors complete all as specified and directed.

Taking down steel water tubing 15mm to 20 mm with all fittings from walls, ceiling and floors, complete all as specified and directed.

Taking down shutter and refixing the same after easing & minor alteration in sizes area not nexc 1.5 Sqm complete all as specified and directed.

Taking down Chowkhats or frames without taking off shutters from the frame not exc 1.5 Sqm each complete all as specified and directed.

S&F factory made Box type steel window, steel frame 80mm x 60mm (peripheral) and 80mmx75mm(intermediate memebrs)made out out of cold rolled 1.25mm thick sheet having steel window/ventilator shutter of MS tubulor section of size 50mmx20mmx1.10mm thick fixed with box type hollow tubulor section beading for glazed and wire shutter (with glazing bar), handle of 100mm size made out of Z section 2 Nos MS stove enameled black bolt of size 120mm 02 Nos, 150mm mild steel hook and eyes, with and including a shop coat of red oxide primer complete all as shown in Drg No TD-219/220R/Sh 1/3 to 3/3 of HQ CE Chd Zone.

All as per item No 42 here-in-before but without glazing bar.

M&L for preparation of steel surfaces of any description, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F in repair 20-25mm mm dia curtain rod made of aluminium Pipe with decorative lining coating,including brackets and decorative balls / caps at both ends of rod with comp fittings complete all as specified and directed.

S&F in repair 20mm dia SS 304 curtain rod including brackets, decorative balls/caps on both ends of curtain rods with comp fittings complete all as specified and directed.

Supplying and laying CPVC pipes (SDR-11) of outer dia 20mm with and including CPVC SDR-11 fittings on walls and ceilings or laying in floors complete all as specified and as directed.

All as per item No 47 here-in-before but 25 mm dia complete all as specified and directed.

S&F in repair vitreous china (white) counter top wash basin in square / rectangular shape of standard size complete all as specified and directed. (Cat Part - Calburt MINI from CERA or equivalent) make specified in Appx 'B'.

S&F in repair vitreous china (white) wall hung wash basin with full pedestal of rectangular shape make CALVINA from CERA or equivalent make specified in Appx 'B'.

S&F in repair SS 304 cutlery trays of modular kitchen concept including fixing with sliders, rollers for front & back movement complete all as specified and directed.

S&F in repair modular kitchen concept tandem box drawer system having space for deep and shallow storage for bottom cabinets including purpose made handles fixing with sliders, rollers front & back movement complete with and including tray for containers and utensils complete all as specified and directed.

S&F ball catchers for cupboard and kitchen cabinets both male & female part (making each set) complete all as specified and directed.

S&F in repair 75mm size 4 lever brass chromium plated handle door lock for built in cupboard (mild steel shutters) complete all as specified and directed.

M&L for Framed work such as grills,gratings,etc..with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bar, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size,with complete fitting complete all as specified and directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers and CP waste coupling including bedding in cement mortar to dward wall or including fixing cantilever brackets and connection union to pipe overall size 37' x 18' x 8' complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl fixing hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for false ceiling all as specified and directed for size of grid 605 x 605mm.

S&F 7mm thick PVC laminated gypsum boards or tiles in ceilings for insulation and accoustic purposes, 60cm x 60cm in size complete all as specified and directed.

Dismantiling timber scantling in fillets, rail, posts, rafter, purlins, etc under 40Sq.cm in section complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 250 & n.exc 500 ltr in capacity complete all as specified.

Disconnecting existing water tanks , setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 500 & n.exc 1000 ltr in capacity complete all as specified.

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

Dismantling water tanks 1000 ltr /500 ltr complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc(exc 250 & nexc 500 ltr) complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc(exc 500 & nexc 1000 ltr) complete all as specified and directed.

S&F in repair Chromium plated brass Toilet paper holder complete all as specified and directed.

S&F in repair Chromium plated brass Jet spray with tube 1.5 mtr complete all as specified and directed.

S&F in repair Chromium plated brass 2 in 1 health faucet with hook 1mtr tube complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedastal pattern) white (exclusing fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F Brass chromium plated Tubler towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F in repairs 15mm dia bore pipe Ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking down CI soil waste or vent pipe 100mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed.

Taking doen CI soil waste or vent pipe 75mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed.

S & F 110MM PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 75 MM PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F in repair 110MM PVC SWR Bends any radius complete all as specified and directed.

S & F in repair 75 MM PVC SWR Bends any radius complete all as specified and directed.

S & F in repair 75MM PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F Door strip (snake guard strip) complete all as specified and directed.

S & F Standing float valve of china ware cistern of 10 ltrs capacity as per existing pan in repair complete all as specified and directed.

Providing and fixing anodised aluminium work for door windows, ventilators, casement/sliding shutters and partitions with extruded built up standard tabular and other sections of approval make fixed with rawl plugs and screws or with fixing clips or with expansion hold fastner incl neceesary filling up of gaps at junctions at top bottom & sides with required PVC neoprene belt etc. Aluminium section shall be not less than 2mm thick, smooth rust free straight mitred and jointed mechanically where ever required including cleats angles, aluminium snap beading for glazing/panelling, CP brass/stainless steel screw incl providing hinges/pivot and making provision for fixing of fittings where ever required complete all as specified and directed. Note:- panel fillings other than aluminium filling and necessary fittings shall be measured and paid for seperately under respective items.

S&F 5.00mm thick glass corner shelf set (Each set consiting of three pieces) having stainless steel perimeter border all as specified and as directed.

Demolitioin of cement conc in ground floors and pavings n.exc 15cms thickness (below or above GL).

M & L Cement concrete type B -1, 1:2:4 type B-I (20mm graded stone aggregate) 25 mm thick, complete all as specified and directed.

M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks disignation 7.5 complete all as specified and directed.

Brick work with sub class 'B' bricks designation 7.5 half brick thick straight or curved on plan to any radius in half brick walls built in CM(1:4) complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L ceramic coloured tiles 8-9mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L coloured vitrified tiles (scratch and strain resistant tiles) 10mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises

M&L Glazed ceramic coloured,,tiles 450x350x6-7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in CM (1:4) complete all as specified and directed.

M&L Black Granite stone 18-20 mm thick as in kitchen platform incl rounding or bullnosing the exposed edges over and including 15 mm thick screed in CM 1:3 complete all as specified and directed.

Dismanntling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

S & F 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

S & F 0.63mm galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, valleys, gutters etc. fixed with self tapping screws complete all as specified and as directed.

S & F Fe 410-w(Gde E 250)quality B rolled mild steel roof trusses (framed) trussed, purlins, crane gantries, rails and framing (beam, tee, angle, channel or flat sections) including distance pieaces cleats etc complete all as specified and directed.

Preparation of old surfaces of CGI sheetings, any description, Over 10 cm in width or girth and applying a coat synthetic enamal paint complete all as specified and directed.

Taking down chowkats or frames without taking off shutters exc 1.50Sqm but nexc 4.00Sqm complete all as specified and directed.

Taking down shutter of any description nexc 1.5 Sqm complete all as specified and directed.

S&F factory made solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specified.

S&F factory made solid panel PVC Door shutter 30mm thick (stiles)consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain cover PVC 'C' channel having PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails on either side & as gap insert for top rail & bottom rails, panelling of plain colour PVC sheet to be the fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description ,not otherwise described complete all as specified and directed.

Preparation of new or previously untreated surfaces of steel or iron any description, over 10cm in width or girth,not otherwise described and two coats of synthetic enamel paint over red oxiede primer complete all as specified and directed.

M & L 2nd class hard wood 35mm thick plain framed panelled shutter (min 2 panels) with lock rail and panel of 9mm BWP commercial ply on both faces. The size of rail and stile as per IS 1003(part I) complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glued pinned at jointes complete all as specified and directed.

M & L 75 mm thick Cement concrete type D2,1:4:8 (40mm graded stone aggregate) as in sub base,path,floor, hardstanding complete as as specified and directed.

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work complete all as specified and directed..

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work but except stone complete all as specified and directed.

Flush pointing to random rubble, uncoursed or brought up to coursed CM 1:4 complete all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in lime mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar complete all as specified and directed.

M&L providing for PCC 1:3:6 Type C-1 using 20mm aggrgate as in coping, apex stone, complete all as specified and directed.

M&L Cement concrete in surface channels and drains in cement concrete 1:3:6 type C1 (20 mm graded stone aggregate) complete all as specified and directed.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Machine pressed precast conctete coloured interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade and to be laid in any pattern complete all as specified and directed.

Machine pressed precast conctete coloured interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade and to be laid in any pattern complete all as specifiea and directed.

Providing cement concrete Type B1 1:2:4 (20mm graded aggregate) kerbs or mut stops, rounded or chamfered on edges complete all as specified and directed.

S & F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S & F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F in repairs Kitchen Plate Rack (600x750x250mm) made of 0.63 mm thick stainless steel sheet to accommodate (8 plate) complete all as specified and directed.

S&F in repairs towel (600 mm long) rack stainless steel with peg set all as specified and as directed.

S&F in repairs waste pipe 32mm dia flexible for Sink and WHB all as specified and as directed.

S&F in repairs 10 ltr capacity PVC vlaveless syphonic action type flushing cistern low level,white with inlet ball valve,float and handle including brackets complete all as specified and directed.

Taking down aluminium shutters n exc 1.00 sqm and refixing in the same opening after easing, cleating, and all necessary adjustments complete all as specified and directed.

Taking down aluminium shutters exc 1.00 Sqm but n exc 2.00 sqm and refixing in the same opening after easing, cleating, and all necessary adjustments complete all as specified and directed.

S&F in repair double action floor spring, hydraulically regulated made up of aluminium 1.25mm thick aluminium alloy sheet , foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M & L honey comb brick work in one brick thick construction with subclass 'B' bricks straight or curved on plan exc 6mm mean radius built in CM 1:6 including soakage wells complete all as specified and directed.

Blank

M&L Cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after laying and testing complete all as specified

M&L 150mm bore (internal dia) salt glazed stone ware pipes grade A laid in trenches on concrete bed to required slope jointed complete all as specified.

All as per item No 143 here-in-before but UPVC pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150 dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate finished smooth and reforming benching as required complete all as specified and directed.

Cutting into existing manholes for removing existing branch drain making good to walling and rendering cutting out branch channel and making good benching for 150mm dia of pipe complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and n exc 10 sqm on plan and getting out in soft and loose soil complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified.

Removal of excavated soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

Demolition and breaking up drain pipe 150mm bore salt glazed stone ware/AC/PVC pipe complete all as specified.

M&L for 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

Dismantling existing waterproofing treatment hessian cloth base, membrane or any type including removal of debris from the site and depositing where directed.

M & L for preparation and cleaning surfaces of cement concrete incl flashing and junction of parapets etc and applying APP based polymeric memberane min wt 3 Kg/Sqm and min 3 mm thick reinforced with non woven fabric with torch application over and including a coat of oil base bituminous primer and finally applying two coats of bitumenous aluminum paint @ 0.20 kg per sqm over APP membrane, complete all specified and directed.

Demolition of existing mud phuska , brick Koba waterproofing treatment, bringing it down carefully, removal of debris from the site and depositing where directed at a distance exc 1.00 Km but n exc 2.00Km complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for in any location and any position complete all as specified and directed.

S&F framed works with angle iron , MS flat , welded or rivetted for fixing weld mesh having aperture 25mm x 25mm and fixed at a ht of about 11 Mtr-14 Mtr (Weld mesh will be measuered and paid for seperately) complete all as specified and directed.

Supply only welded steel wire fabric of wt n exc 4.00Kg per Sqm complete all as specified and directed.

Bairagi Builders

Puneet Sharma