WBSIDCL/30 Elec of 2024-25 Sl 1

Amount

Supplying, Placing and Positioning the 5.0 H.P Horizontal Openwell Submerssible Pump Motor set in side the underground tank floor, aligning properly with necessary packing and fixing the set with holding bolts, nuts and washer for properly grouting including cutting holes of requisite size on top of the underground tank for passing the pipes and mending good all damages complete as per direction of the Engineer-in-Charge. suitable for operation in AC Three phases 415 V, 50 Hz power supply. (Make: KSB, MR5FC-50-40-45 DOL2.5 Sq.mm/ Kirloskar or equ as approved by EIC)

Supply and fixing of direct on line ( DOL) strater panel board of suitable for 5.0 HP rating Openwell Mono Block Submersible pump motor set for operation in 415V (+/- 10%) AC, Three phase, 50Hz (+/- 5%) comprising of ammeter, voltmeter, thermal overload relay, 3 pole magnetic contactor, under voltage protection, indicating lamp, capacitors, on/off push buttons including 5 way connector, wiring with l/1.5 sq.mm PVC insulated copper wire, powder coated vermin proof box. (Make: L&T, MU-G6 DOL or equ as approved by EIC)

Supplying of 40 mm dia uPVC pipe. (Make: Ashirvad/ Astral or equ as approved by EIC)

Supplying of 50 mm dia uPVC pipe. (Make: Ashirvad/ Astral or equ as approved by EIC)

Supply of 80 mm dia (Medium quality) G. I. pipes of TATA make including necessary sockets.

Supply of 40 mm dia. galvanised iron socket with I.S.I. mark.

Supply of 50 mm dia. galvanised iron socket with I.S.I. mark.

Supply & fixing of uPVC pipe fittings. (Make: Ashirvad/ Astral or equ as approved by EIC)

40 mm dia Male Adaptor Brass Threaded – MABT

50 mm dia Male Adaptor Brass Threaded – MABT

40 mm dia Elbow

50 mm dia Elbow

40 mm dia Tee

Reducer Coupler (50 mm x 40 mm)

40 mm dia Ball Valve

40 mm dia Coupler

40 mm Union

Pipe Clip suitable for 40 mm dia pipe

Pipe Clip suitable for 50 mm dia pipe

Supply & fixing of 1.1KV grade 3C x 1.5 sq.mm Flat Cables With Bunched Copper Conductor, PVC Insulated Submersible for Pump Motor set. (Make: Gloster/ Havells/ Polycab or equ as approved by EIC)

Supply & fixing of 1.1KV grade 3C x 2.5 sq.mm Flat Cables With Bunched Copper Conductor, PVC Insulated Submersible for Pump Motor set. (Make: Gloster/ Havells/ Polycab or equ as approved by EIC)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required: 40 mm dia

Supply of uPVC Solvent Cement. (237 ml.)

Supply of JPT Water Inlet Micro Pump Filter Stainless Steel Net Plastic Frame. (Design approved by EIC)

Charges for engagement of Mason for removing of paver block and relaying same after installation of water supply pipe lines as per approved design by EIC.

Charges for engagement of Mason (Helper) for removing of paver block and relaying same after installation of water supply pipe lines as per approved design by EIC.

Charges for engagement of Excavator for dismantling of cement concrete works, stacking serviceable materials at site and removing rubbish as directed by EIC.

Charges for engagement of Mazdoor for removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound and surface dressing of the ground in any kind of soil and cleaning the site in all respect as per direction of Engineer in charge.

Refixing 80mm dia G.I. pipe with fittings after cleaning where necessary.

Hire and labour charges for shuttering with centering and necessary staging and thick hard wood planks of approved thickness with required bracing for concrete slabs including fitting, fixing and striking out after completion of works.

Cement concrete with graded jhama khoa (30 mm size) excluding shuttering.

Supplying & laying 60mm thick inter locking designer concrete paver block M35 grade for light-traffic zone, commercial & office complex, tourist resort as perIS:15658-2006 (over20-40mm medium sand bed on 250mm thk WBM/WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) (colored decorative only), etc including necessary under lay complete in all respect with all labour and material.

Charges for engagement of Plumber for dismantling of all existing GI pipe lines, pump motor sets, valves etc and reinstall the new uPVC pipe lines, valves including recomissioning of existing pump motor set as per direction by EIC.

Charges for engagement of Fitter (Helper) for dismantling of all existing GI pipe lines, pump motor sets, valves etc and reinstall the new uPVC pipe lines, valves including recomissioning of existing pump motor set as per direction by EIC.

Supplying and fixing 40A, 415V FP MCB Isolatoron din rail of existing DBs and necessary connection. (Make: L&T/ Havells/ Standard or equ as approved by EIC)

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. (4 way)

Supplying and fixing 32A, 415V FP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make: L&T/ Havells/ Standard or equ as approved by EIC)

Supplying & fixing sheet metal (16SWG) Iron Clad Bus bar chamber on angle iron frame on wall, incl. Earthing attachment and painting as required: 4 Cu. bars. 415V, 125A

Supplying and fixing 415V, 16A FP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make: L&T/ Havells/ Standard or equ as approved by EIC)

Supplying 1.5mm thick M.S. sheet fitted and fixed on one faces of M.S. gate etc.with point welding at not more than 150mm apart complete in all respect as per design approved by EIC including cost of all labour and materials.

M.S. door as per approved design made of strong M.S. frame work, inter mediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.

M.S. works in framed gratings of gate etc. made of round or square bars and frame work or M.S. flats (with the bars securely fixed to the flat bar frame) with or without intermediate flat bar stiffener and fixed with necessary screws etc. complete, as directed.

M.S. structural works with hollow sections (square or rectangular shape) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding using electrodes of approved make and brand haulage, hoisting and erection all complete. The rate includes the cost of all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages complete.

Supplying, fitting, fixing bolts with nuts, washer (10mm dia x Length up to 75 mm )

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with ready mixed Black Japan of approved make and brand including smoothening surface.

One coat

Two coats

Supplying, fitting and fixing 16mm boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/ Lipping]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required: 4 x 4 sq.mm + 2 x 2.5 sq.mm

RADHA KRISHNA ENTERPRISE (BID ID -6251560)

BHAI BHAI ELECTRIC (BID ID -6251579)

S. ENTERPRISE (BID ID -6251595)