ESD/L-180/2020

Amount

Civil Items Demolishing existing brick work made out of cement motor manually/ by mechanical means including stacking of serviceable material as per direction of Engineer-in-charge

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars as per direction of Engineer - in- charge

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, including all leads and lifts etc. complete.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking at IICT Civil engineering stores : Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar and disposal of material including loading , transporting , unloading to approved municipal dumping ground including all leads and lifts etc., complete as directed by engineer incharge. For thickness of tiles 10 mm to 25 mm

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Providing and laying Vitrified tiles in floor including skirting with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints Size of Tile 600x600 mm make: Johnson,Rak, Somany or its equivalent

Providing and laying non skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints pointing the joints with white cement and matching pigment etc., complete. Make : Johnson , RAK, Somany or its equivalent

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete

Wall painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade : Two or more coats on new work + Applying one coat of cement primer of approved brand and manufacture on wall surface : Asain paint or its equivalent

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on old work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (Asain paint or its equivalent)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Asain paint or its equivalent

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all Levels Granite of any colour and shade as directed by engineer-in-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 225 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. make: Johnson,RAK , Somany or its equivalent

Polishing on wood work with ready made wax polish of approved brand and manufacture as directed by engineer-in-charge

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, outside iict all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing C.P brass bib cock of approved quality 15 mm nominal bore conforming to IS :8931 Make HINDWARE or its equivalent

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 20 mm nominal bore Make : HINDWARE or its equivalent

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter Make : HINDWARE or its equivalent

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm nominal outer dia Pipes Make : Ashirvad or its equivalent

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. (Hindware or its equivalent )

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Make : Hindware or its equivalent

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing 600x450 mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete Make: Hindware or its equivalent.

Providing and fixing toilet C.P. paper holder Make: Hindware or its equivalent

Providing and fixing liquid soap dish including all necessary screws of approved quality as directed by engineer-in-charge .Make : Hindware or its equivalent

Providing and fixing high grade stainless steel towel rod complete with brackets fixed to wodden cleats with C.P Brass screws with concelaed fitting arrangement of approved quality and 600 mm long towel rail complete as directed by engineer-in-charge Make : Hindware or its equivalent

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore Make : Zoloto or its equivalent

Providing and fixing C.P grating of approved quality and colour. Circular type 100 mm nominal dia

Providing and fixing C.P grating of approved quality and colour 125 mm nominal dia with 25 mm waste hole

Providing and fixing stainless steel brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete 20 mm diameter

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm (Hindware or its equivalent )

Removing the existing 4mm thick bitumunious old demaged water proofing treatment and disposal of all rubbish outside of IICT-Campus to approved municipal ground with all leads and lifts etc. complete and as directed by Engineer-in charge.

Providing and applying 15mm thick cement flooring with baby chips for petty /* patch works on roof to maintain (1;4) in petty/patch works as per the direction of Engineer- incharge with all leads and lifts and as directed.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore Make : Hindware or its equivalent

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore make : Hindware or its equivalent

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 4 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete including one coat of silver paint . The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane,including removal of exist tar felt, cleaning of the surface from dirt,dust and other contaminants as directed by engineer-in-charge 4 mm thick

Providing pressure grouting using CEBEX 100 with mixing of cement slurry wherever it is required as directed by Engineer in Charge.

Provding and fixing C.P wall mixture as directed by Engineer-in-charge Make : Hindware or its equivalent

Provding and Fixing C.P 2 Way Bib cock conforming to IS standrads as directed By engineer-in-charge Make : Hindware or its equivalent

Provding and Fixing Healthfaucet as directed By engineer-in-charge Make : Hindware or its equivalent

Electrical Items: Dismantling of Existing DB's, Switch Boards and removing of Old wiring in the Building : Dismantling of DB's of TPN -FU/ MCB DB's switchgears as out goings and disconnection of existing connected cables,earth wires from switchgears, Metal Conduits in the surface of walls. The work includes all related chipping /civil works removing of old wiring to FTL's ,Ceiling fans,Power sockets, A.C'sand other electrical accessories and transporting the dismantled material over lead distance of about 1000Mtrs from the site as per the Departmental stores conditions and directed by as the engineer incharge

S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess cutting the wall and making good with necessary cement plastering works the same in case of recessed conduit as required Make : Please refer List of Approved makes 25mm

S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required Make: Please refer List of Approved makes 3 module

S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required Make: Please refer List of Approved makes 4 module

S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required Make: Please refer List of Approved makes 6 module

S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required Make: Please refer List of Approved makes 8 module

S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required Make: Please refer List of Approved makes 12 module

Point wiring in PVC conduit with modular type switch: Wiring for light point /fan point/exhaust fan point /call bell pont with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit/PVC Casing and Caping with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FR PVC insulated copper conductor single core cable etc., as required. Group A

Point wiring in PVC conduit with modular type switch: Wiring for light point /fan point/exhaust fan point /call bell pont with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit/PVC Casing and Caping with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FR PVC insulated copper conductor single core cable etc., as required. Group B

Wiring for twin control light point with 1.5 sq.mm FR PVCinsulated copper conductor single core cable in surface/recessed medium class PVC conduit/ PVC Casing and Caping, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit/PVC Casing and Caping as required. Make: Please refer List of Approved makes 3 x 2.5 sq.mm

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit/PVC Casing and Caping as required. Make: Please refer List of Approved makes3 x 4 sq.mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed with medium class PVC conduit as required 4x10sq. mm + 2 X 10 sq. mm earth wire

Telephone Wiring in existing Conduit :Supplying and drawing following pair 0.5 sq mm FR PVCinsulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes 5/6A One way Switch

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes 15/16A One way Switch

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes 3pin 5/6A socket outlet

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes 6pin 16A/6A power socket outlet

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes Telephone socket outlet

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes TV antenna socket outlet

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes Electronic fan regulator

S/F 'C' series MCB: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,"C" curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:Please refer List of Approved makes Single pole

Supplying and fixing following rating, four pole, (three phase andneutral), 415 volts, residual current circuit breaker (RCCB),having a sensitivity current upto 300 milliamperes in the existingMCB DB complete with connections,testing and commissi oning etc. as required. 40Amps

S/F TP MCB DB: Supplying and fixing following way , three pole horizontal type and neutral,sheet steel , MCB Distribution board , 415Volts, on surface /recess complete with tinned copper bus bar, neutral bus bar,earth bar,din bar ,detachable gland plate, interconnections, phosphatized and powder painted inclding earthing etc..., as required (But without MCB/ RCCB /Isolator) Make:Please refer List of Approved makes 6 way (4 + 18), Double door

Installation, testing and commissioning of pre-wired, fluorescentfitting / LED Fittings compact fluorescent fitting/LED Fittings of all types, complete withall accessories and tube etc. directly on ceiling/ wall,including connection with 1.5 sq. mm FRLS PVC insulated, copperconductor, single core cable and earthing etc. as required.

Supply of BEE Five star rated Energy efficient High speed, 1200mm (48'') Sweep Electrical ceiling fan shall be capacitor type with double ball bearings complete with capacitor(Oil Type), 300 mm down rod , canopies, shackles, 3 numbers of blades Made of aluminum alloy, suitable for operation on Single phase 230/240 Volts ,50HzAC supply as required Colour: Ivory/White

Installation, testing and commissioning of ceiling fan, includingwiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor,single core cable etc. asrequired.

IInstallation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. asrequired. Upto 450 mm sweep

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. As Required

Supplying and fixing brass batten/ angle holder includingconnection etc. as required.

Supply of 3.5Cx35Sq.mm aluminium armoured XLPE insulated under ground cable as per IS standards etc., as required and as directed by the engineer in charge. Make: - Havells / Finolex

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5C X 35 sq. mm (32mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Y RAJA SHARMA