REPAIR REPLACEMENT OF FLOOR, WALL TILING, FALSE CEILING, PLASTERING, PLINTH PROTECTION AND ALLIED WORKS OF MD ACCN AND OTM ACCN AT AIR FORCE STATION ARJAN SINGH

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed by Engr- In- Charge.

Material and labour for 7 to 8 mm thick joint free premium quality matt finished coloured ceramic tiles size of each tiles should be 400 mm x 400 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for 7 to 8 mm thick joint free premium quality matt finished coloured ceramic tiles size of each tiles should be 400 mm x 400 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 300 mm x 300 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for 7 mm thick joint free premium quality glazed ceramic colour tiles of size 450 mm x 350 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for 10 mm thick joint free premium quality light shed vitrified ceramic tiles of size 600 mm x 600 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces laid over 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for 10 mm thick joint free premium quality light shed vitrified ceramic tiles of size 600 mm x 600 mm as in skirting / dado set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Material and labour for 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and demolished the old slab.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) as directed by Engineer-In-Charge.

Material and labour for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in sub base and finished the surfaces even and rough complete all as specified.

Material and labour for 75 mm thick cement concrete 1:2:4 type B2 using 40 mm graded crushed stone aggregates as in floor and finished the surfaces even and smooth without using extra cement complete all as specified.

Material and labour for 30 mm thick cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in sub base and finished the surfaces even and rough complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for as directed by Engineer-In-Charge.

Material and labour for reinforced cement concrete, 1:1.5:3 type A1 using 20 mm graded crushed stone aggregates as in chajja etc. complete all as specified. Note:- Reinforcement and form work shall be measured and paid separately.

Material and labour for Mild steel TMT bars of Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500D, 8 to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Machine pressed precast concrete coloured interlocking paver block laid in floor with grey cement and no pigment, any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade over and including 50 mm thick layer of sand cushioning, complete all as specified.

Material and labour for sand filling under floor or in foundations including watering and consolidation as specified.

Material and labour for Coloured chequered cement concrete tiles, machine pressed, factory made of size 300 mm x 300 mm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 20 mm thick screed bed in CM 1:6, complete all as specified.

Material and labour for 75 mm thick PCC 1:3:6, type C2 using 40 mm graded crushed stone aggregates as in plinth protection laid to slope 1:12 and finished the surface even and smooth without using extra cement complete all as specified.

Demolition of Brickwork built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework in and precast concrete articles

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

Material and labour for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius,built in cement mortar (1:6), complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.

Material and labour for 20 mm thick rendering in cement mortar 1:4 in two layers (12 mm +8 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC on second layer (8 mm) as per manufacturer instruction complete all as specified. Note: LWPC shall be measured and paid separately

Supply only LWPC.

Material and labour for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.

Material and labour for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of primer and 1 mm thick wall care putty complete all as specified.

Material and labour for preparation of new wall surfaces and applying two coats of exterior emulsion paint over a coat of chalk whiting as a primer complete all as specified.

Material and labour for preparation of new wall surfaces and applying two coats of cement based paint over a coat of cement primer complete all as specified.

Material and labour for preparation of new ceiling surfaces and applying three coats of white wash complete all as specified.

Dismantling of wall/ceiling boards (fibre, pulp,insulation etc) or insulation boards/ slabs/blanket any thickness including cover fillets all as specified.

Material and labour for for suspended false ceiling using grid 180 GSM (exposed ceiling suspension system ) of grid size 605 mm x 605 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure steel Non Asbestos Fibre Cement decorative Board in a grid of powder coated GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1210 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1210 mm cross tee to be interlocked between main runners @ 605 mm c/c,so as to form 600 mm x 600 mm grid complete all as specified . Make: Everest/ Lafarge/ Armstrong

Material and labour for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified. Make: KISAN/ PRINCE/ SUPREME

Supply and fix 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls including all necessary PVC clamps,bends etc. complete all as specified. Make: KISAN/ PRINCE/ SUPREME Note:- Bend and junction should be measured and paid on separate item

Supply only 75 mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as specified. Make: KISAN/ PRINCE/ SUPREME

Supply only 75 mm dia PVC (SWR) door bends. Make: KISAN/ PRINCE/ SUPREME

Supply and fix 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls including all necessary PVC clamps,bends etc. complete all as specified. Make: KISAN/ PRINCE/ SUPREME Note:- Bend and junction should be measured and paid on separate item

Supply only 110 mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as specified. Make: KISAN/ PRINCE/ SUPREME

Supply only 110 mm dia PVC (SWR) door bends. Make: KISAN/ PRINCE/ SUPREME

Supply and fix brass CP single lever shower mixer for connection to hand shower with connecting legs & wall flanges for mixing hot and cold water complete all as specified. Make:- Parryware Cat No T3858A1/ Jaquar Cat No KUP-35149PM / Marc Cat No MMO-2030

Supply and fix as in repairs CP health faucet with 1 mtr tube and hook including all fittings as per manufacturer instruction. Make: Parryware Cat No T9961A1/ Jaquar Cat No ALD-579 / Johnson Cat No S0826C

Supply and fix as in repairs 15 mm bore single lever angular Stop valves with wall flange, with all fittings complete as per manufacturer instruction. Make:- Jaquar Cat No FON-40053/ Johnson Cat No T3410C/ Cera Cat No F2008201

Supply and fix 15 mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. Make Parryware Cat No G0304A1/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030

M/S SWAPAN KUMAR MONDAL

M/S Konar Engineering

SAP ENTERPRISES

M/S DEBNATH MONDAL

subash chander bahl