CONSTRUCTION OF TECHNICAL BUILDINGS AT RAKHMUTHI UNDER GE (P) TANDA.

Amount

Total Amount of Sch 'A' Part - I (Building Work)

Total Amount of Sch 'A' Part - II (Internal Electrification)

Total Amount of Sch 'A' Part - III (Road, Path and Culvert)

Total Amount of Sch 'A' Part - IV (Area Drainage)

Total Amount of Sch 'A' Part - V (Fire Point)

Total Amount of Sch 'A' Part - VI (Sign Board)

Total Amount of Sch 'A' Part - VII (Fire Seal)

Total Amount of Sch 'A' Part - VIII (External Electrification)

Total Amount of Sch 'A' Part - IX (Lightening Protection)

Total Amount of Sch 'A' Part - X (External Water Supply)

Sch 'A' Part - XI (Misc Items work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.

Precast cement concrete cubes using M-20 (design mix) of size 250mm x 250mm x 250mm as in dunnage blocks complete all as specified and as directed .

Flame proof, weather proof LED bulk head light 11 watt, indoor type fittings, complete all as specified and as directed.

Flame proof, weather proof distribution board, 6 way with and including accumulated flame proof 01 No MCB SPN 0-10 Amps, 10 KA and 3 No of MCB SP 0-6 Amps, 10 KA, complete all as specified and as directed.

1100 volts grade heavy duty cable with XLPE insulated armoured aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall XLPE sheathed of 16 Sqmm 4 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

1100 volts grade heavy duty cable with XLPE insulated armoured aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall XLPE sheathed of 10 Sqmm 4 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

1100 volts grade heavy duty cable with XLPE insulated armoured aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall XLPE sheathed of 10 Sqmm 2 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

Citting into existing bituminous carpet road/PCC hardstanding upto a depth of 30cm for laying of underground cable/GI pipe and making good the disturbed surfaces to match with existing, complete all as specified and as directed.

Junction box water proof outdoor type made out of SMC of external dimensions 250x250x105mm, sigle door type hinged with locking arrangement front operated with one number MCB 06 Amps capacity for housing 3 phase and neutral busbar including connecting the incoming/outging cables including cable glands , SMC coated coated clamps, nuts and bolts etc. all as directed and fixed to existing poles with mild steel flat of size 25mm x 4mm. Make: Sintex Cat Part No. GSTB 2520 or eqivalant in other approved makes

LED street luminaries, 70/72 watt, powder coated pressure die cast aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lumen output > 100 Lum/watt, lumen maintenance > 70% at 50000 hours, colour temp 5000-6500K, CRI > 70, THD < 15%, PF > 0.95 and LM 80 test complaince. The driver must be inteated APFC circuit protection, reverse polarity protection against 5KV high and comply with IEC:60598-1, IEC:61000-3-2, IEC:61547. The luminaire must have secondary optics with perfectly matched lens for better light control with and including brackets made of GI pipe of suitable dia light grade, bend to shape at an angle of 65120 degree not less than 1.2mtr long with 2 Nos. of M.S clamp fabricated out of MS flat of size 50 x 6 mm on pole, including nuts, bolts, washers etc and making electrical connections with 1.5sqmm sheathed copper conductor flexible wire of suitable length drawn into suitable size steel conduit with 03 Nos clamps from steet light to junction box, complete all as. specified and as directed.

Steel tubular swaged pole complete with base plate welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-31 (9m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with blak and white paint alternately on external surface above PCC benching including numbering with black paint and painting with bituminous paint internally complete and externally for portion embedded in PCC, complete all as specified and directed (PCC, earth work shall be measured & paid separately under respective items).

Electric motor siren, ideal audible range (diametrical) 3.25 Kms, Motor HP-0.50, RPM-8000, single phase, 220/240 volts AC, copper winding, aluminium casting body, double mounting, horizontal fitment, alongwith spring return push botton with element with box and fixed, complete including suitable size 3 core wire in steel conduit from siren to push button and fixing clamps, etc all as specified and as directed.

Thermometer having function of of wet bulb and dry bulb and fixed, complete all as directed.

Street light panel pole mounted outdoor type cubical panel suitable for maximum load of 6KW, 440 volts, 3 phase, 4 wire, 50 cycles per second comprising of incomming MCB TPN , 415 volts, 40 Amps-01 No, contactor TP 415 volts of rating 32 Amps-01 No, Digital timer 24 hours-01 No, toggle switch-01 No, complete all as specified and as directed. Make: Havells Cat part No. 1HXTS 03060 or equivalent of other approved makes.

Supply only glass dividing strips, 4mm thick and 38mm wide, complete all as specified.

Ciutting the existing MS/CI/GI pipe line upto 150mm bore by necessary welding or any other means and insertion of langed MS/CI Tee for new connection upto 50mm bore complete including excavation and earth work for branch connection from the existing MS/CI/GI pipeline. Note: The rate of new Tee is deemed to be included in the unit rate quoted by the tenderer.

Construction of valve pit (Brick masonry) of size 600mm x 600mm x 600mm internal dimension, complete, all as specified and as shown on drawing CEUZ/TD/1500/15.

LED tube light fitting flame proof type, CMRI certified, IP 65 protected, 2x16/20 watt including integral reflector made of aluminium alloy LM6 complete with all accessories prewired and including connecting up with three core flame proof copper conductor of suitable size, complete all as specified and as directed. Make : Crompton Cat Part No EXTN2LT8-16/20 or technically and commercially equivalent model of Bajaj/Sudir as approved by GE.

M/S KAPIL KUMAR KHATTAR

M/S MOOL RAJ SHARMA

M/s V6 Infrastructures Pvt. Ltd.

Gupta Construction Company

M/s Ravinder Kapoor Engineers and Builders