REPAIR AND REPLACEMENT OF WOODEN, ALUMINIUM, STEEL JOINERY AND MISC SANITORY AND PLUMBING WORK IN OD COMPLEX UNDER GE EAST MATHURA

Amount

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frames) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description n exc 1 sq.m each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

M&L for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as per directed of Engineer-in-Charge. Note: WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as per directed of Engineer-in-Charge. Note: WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for Factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter, 30 mm thick, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 50 N/mm2, modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of mimimum 14 microns of approved desin, pasted with hot melt adhesive on both face of shutter and fixing with SS Butt hinge as required with full body threaded star headed counter sunk SS screw complete all as per directed of Engineer-in-Charge.

M&L for Factory made single extruded WPC (Wood Polymer composite) solid both side prelaminated panel, wire mesh, gauzed shutter, 30 mm thick, Panelled with SS mosquitoes proofing mesh and XTN aluminium mesh, comprising of minimum density of 650 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 50 N/mm2, modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of mimimum 14 microns of approved desin, pasted with hot melt adhesive on both face of shutter and fixing with SS Butt hinge as required with full body threaded star headed counter sunk SS screw complete all as per directed of Engineer-in-Charge.

S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in filling of steel frame complete all as specified and as directed.

S&F 30 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel commercial type on both side complete all as specified and as directed.

S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick one side prelam colour PVC sheet reinforced with M.S. Square tube & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.

S&F in repair steel rolling shutters, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, push pull or manual type, gear operated type with chain wheel and hand chain, thickness of laths 1.25mm, complete as directed and all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed.

S&F stainless steel butt hinges, medium weight, 100 mm size complete all as specified and as directed.

S&F aluminium anodised handles of size 150 mm, cast type complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed with screw complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts 125 mm long of extruded section and fixed with screw complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed.

S&F in repair 100 mm long medium weight, Butt hinges, complete all as specified and as directed.

S&F in repair 150 mm long aluminium anodised handles, fabricated type complete all as specified and as directed.

S&F in repair aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed with screw complete all as specified and as directed.

S&F in repair aluminium anodised barrel tower bolts 125 mm long of extruded section and fixed with screw complete all as specified and as directed.

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 125 mm long aluminium anodised handles, fabricated type complete all as specified and as directed.

S&F in repair floor door stopper of aluminium anodised body and tongue, anodised with hard drwan steel spring overall length of cover plate 150 mm complete all as specfied and as directed.

S&F in repair mild steel mortice lock vertical type100 mm size 4-lever complete all as specified and as directed.

S&F in repair 25mm dia stainless steel tubular drapery rod with brackets, stops, roller etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/rubber/steel beading etc n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/rubber/steel beading etc exc 0.50 Sqm in each pane complete all as specified and as directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repairs extuded section of aluminium body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F in repair for Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required, EPDM rubber/ neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, all completcEngineer-in-Charge

S&F in repair for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, all complete as per requirement and direction of Engineer in-charge.

S&F in repair for powder coated anodised aluminium door shutters. (powder coating shall not be less than 50 microns of approved colour) aluminium section weighing exc. 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium fittings such as Alu handles -150 mm long -2 Nos in each door, SS hinges -100 mm long -4.0 Nos in each door, tower bolt of 200 mm length -2.00 Nos, anodised aluminum snap beading screws etc. complete all as specified.

S&F in repair for powder coated aluminium window and ventilator shutters (powder coating shall not be less than 50 microns of approved colour) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos), suitable handle (1 No), tower bolt of 150 mm length -2.00 Nos, complete all as specified and as directed

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beading exc. 0.5 square metre in each pane complete all as specified and as directed

Resecuring or easing and adjusting door shutter of any description exc 1.50 Sqm but n. exc 4.00 Sqm each by repairing locking arrangement, floor spring, bottom and top pivot etc. to make the shutter smooth functional of shutter complete all as specified and as directed.

S&F in repair Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters complete all as specified and as directed.

Dismantling of boarding as in kitchen cabinet, cup boards / shelfs / partitions complete all as specified and as directed.

S&F 18 mm thick WPC board in cupboard shutter/ shelves/kitchen cabinet with one side laminated and other side balancing white fixed with solvent cement / adhesive and necessary stainless steel drilling screws/Anchoring bolt along with modular handles, including PVC edging / beading of size 18 x 1 mm thick having density 600 Kg / Cum, design and colour shall be approved by GE complete all as specified and as directed.

S&F 18 mm thick plain white WPC board fixed with solvent cement / adhesive and necessary stainless steel drilling screws/Anchoring bolt as in back side of cupboard / cabinet etc complete all as specified and as directed.

S&F Magnatic catcher (KTS-20) full extension load capacity 8 Kgs suitable for cup board/kitchen cabinet shutter complete all as specified and as directed.

S&F in repair stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet shutters complete all as specified and as directed.

S&F Continuous (piano) hinges width of flaps 30 mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F powder coated MS snap grid frame work (T-type) including providing hangers of 4mm GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia & 40mm long and 4 mm thick prepainted design non-asbestos fibre cement building board fixed or laid/inserted in frame work with screw complete all as specified and as directed.

S&F in repair PVC wall panelling with panel 300x6mm, hollow section, fixed white PVC plug and screw and inserted to next panel groove, edge and corners of all door / window / opening etc to be covered with PVC angle fixed as per manufacturer's instruction complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x 7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick backing coat in cement motar 1:4 complete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

M&L for Vitrified Ceramic joint free light shade double charged tiles 10 mm thick (square/rectagular) polished,area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

All as per item Serial No 58.00 here-in-before but as in skirting/dado over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20 mm thick Granite (any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 10 mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Machine cut kota stone slab (size 550 x 550mm), flooring 20-25mm thick laid over and including 20mm thick screed bed in cement mortar 1:4 and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 18-20mm thick as in skirting, dado and pillar etc laid over and including 10mm thick rendering in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C-2 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection / path/ floor, laid in panel, finishing cement concrete surface even and fair (using extra cement) compete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work using old size sub class 'B' Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls or concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick/concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of in cement mortar 1:6 finished even and fair complete all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of concrete surface as on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls, providing 1mm thick wall care putty to achieve smooth surface and applying two coats of oil bound distember over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint white or tinted over and including a coat of alkali resistant primer complete all as specified and as directed.

S&F in repair steel tubing, galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

S&F in repair steel tubing, galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

S&F in repair steel tubing, galvanised, medium grade 25 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

S&F in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) having monkey protection cover hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm bore dia iron pipe complete all as specified and as directed.

S&F in repair 750 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) having monkey protection cover hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm bore dia iron pipe complete all as specified and as directed.

S&F in repair Ball valves of PTMT high pressure, with polythene float & flynut complete, screwed for 25mm bore iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair Sinks with drainage board made of stainless steel lmm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair bib taps, long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair angular cock / stop valves, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair angular cock / stop valves, concealed type, cast copper alloy, chromium plated, fancy type with long shank & cup, screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads, screwed down high pressure,with or without letters 'Hot' or 'Cold' with long screwed shank and fly -nuts, screwed for 15mm bore dia iron pipe complete all as specified and as directed.

S&F in repair 2 way bib cock cast copper alloy chromium plated with wall flange screwed to 15 mm bore dia pipe complete all as specified and as directed.

S&F in repair over head shower, square / roud shape, cast copper alloy chromium plated with 600mm long arm for 15mm dia bore iron pipe or union complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with stainless steel bracket guard & railing 60cm long complete all as specified and as directed.

S&F in repairs stainless steel towel rail 600 mm long made out of 20mm stainless steel tube fixed with chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed.

S&F stainless steel Towel ring of standard size fized with and including chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed.

S&F stainless steel chromium plated Grating doom 100 mm dia complete all as specified and as directed.

S&F in repair Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes 20 mm bore dia complete all as specified and as directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550x400mm including brackets, brass, chromium plated waste coupling complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nut of length 600mm complete as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repair stainless steel hand jet Health faucet with 8 mm dia 1.2m long SS flexible tube and wall hook complete all as specified and as directed.

shyam construction (BID ID -3386172)

RANA CONSTRUCTION (BID ID -3386300)

M/S CHAUDHARY CONSTRUCTION (BID ID -3382425)

B R ENTERPRISES (BID ID -3385660)

mh enterprises (BID ID -3386495)

JWALA ELECTRIC CONTRACTORS (BID ID -3385921)

R N AGRAWAL (BID ID -3386358)