Construction of balance work of Medical Sub Centre at Barighat by way of compound wall L 122 mtr., Main Gate protection wall Ht. 2.50 mtr. L 30 mtr. protection wall Ht. 2.00 mtr. L 32 mtr

Amount

Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1mtr from cutting edge, disposed earth is to be leveled and neatly dressed in: a) All Kind of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering –All work upto plinth level (including all leads and lifts carriages of material by M.T./H.L.)

1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded nallah stone aggregate 40mm nominal size).

1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded nallah stone aggregate 40mm nominal size).

1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size

Providing and laying Damp Proof Course 50mm thick with cement concrete 1: 2 : 4 (1 Cement : 2 coarse sand : 4 graded crushed stone aggregate 12.5mm nominal size) floor (including all leads and lifts carriages of material by M.T./H.L.)

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) (including all leads and lifts carriages of material by M.T./H.L.)

Extra for Half-brick masonary in superstructure above plinth level upto floor V level (including all leads and lifts carriages of material by M.T./H.L.)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 75 in foundation and plinth in a) Cement Mortar 1:6(1 Cement:6 coarse sand) (including all leads and lifts carriages of material by M.T./H.L.)

Brick work with FPS bricks of class designation 75 in foundations and plinth in cement mortar. a) 1:4 (1 cement : 4 fine sand) (including all leads and lifts carriages of material by M.T./H.L.)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means).

Extra for brick work in square or rectangular pillars.

Centering and shuttering including strutting, propping etc. and removal of form work for:-

a) Foundations, footing, bases of columns etc for mass concrete.

b) Coloumn, pillars, piers, abutments, post and struts.

c) Walls (any thickness) incl. attached pilasters, buttresses, plinth and string courses etc.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering, finishing and reinforcement all work upto plinth level 1: 1.5: 3 (1 Cement: 1.5 Coarse Sand: 3 graded crushed stone aggregate 20 mm nominal size) (including all leads and lifts carriages of material by M.T./H.L.)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excl. cost of centring, shuttering, finishing and reinforcement. a) 1: 1.5: 3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20 mm nominal size) (including all leads and lifts carriages of material by M.T./H.L.)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. a) Cold twisted bars.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

15mm cement plaster of mix : a) 1 : 4 ( 1 cement : 4 coarse sand) (including all leads and lifts carriages of material by M.T./H.L.)

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 litre / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg / 10 sqm).

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade a) New wood work (two or more coats)

Lettering with black Japan paint of approved brand and manufacture.

Carriage of the following materials by Mechanical Transport / Head Load from source to site of work incl. loading, unloading and stacking complete :- a) Sand for an average lead of 2.00 Km by H.L. from Sugal Khad. b) Stone aggregate (Crusher Bajree) below 20mm nominal size for an average lead of 2.00 Km by H.L. from Sugal Khad. c) Stone aggregate 40mm nominal size & above for an average lead of 2.00 km. by H.L. from Sugal Khad. d) Bricks from Kathua for an average lead of 20.00 km. by M.T. & 6.00 km. by H.L.

Mansotra