REPAIR TO STEEL AND MISC FURNITURE AT AF STN UTARLAI

Amount

Repairs to Table computer by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-Charge.Drg : FD/E6/MAP/03

Sliding channal suitable for item No 1.00 above to match with existing design.

CP Handle suitable for item No 1.00 above to match with existing design.

Brass locks uitable for item No 1.00 above to match with existing design.

Removing old unservicable table top and fixing new 18/19mm thick ISI marked Pre-laminated particle board one side teak face as per existing size suitable for item No 1.00 above to match with existing design complete all as specified.

Tightening existing joints using new beading duly applying fevicol of existing size as shown on drawings

Repairs to Chair CBB Steel by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-charge. Drg No: FD-75 (M)

Removing unserviceable damage seat frame and replacing the same with new seat frame made by second class hard wood with canning (Godrej pattern)

Removing unserviceable damage back frame and replacing the same with new seat frame made by second class hard wood with canning (Godrej pattern)

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black finish complete all as specified.

Repairs to chair revolving high/low back /chair computer, with arm including taking out the following worn out components without damaging the existing components and replacing the same with new components all as directed by Engr-in-charge. Drg No - TP.

Removing of unserviceable cushion with tapestry cloth/ Rexine of seat/back and replacing the same with new cushion with tapestry cloth/ Rexine including all around PVC lipping as approved by GE.

Removing unserviceable / damaged caster wheel and fixing new caster wheel as per sample approved

Remove unserviceable hand rest and supply and fixing new hand rest matching the old hand rest.

S & F new revolving cistern

S & F new base complete

Repairs to Chair writing (MAP) taking out the following worn out components without damaging the existing components and replacing the same with new components all as directed by Engr-in-charge drg No FD/E6/MAP/12

Removing of unserviceable Polyurethane foam and acrylic poly propylene and replacing with new Polyurethane foam shall be 50mm thick with density 50 to 55 KG per Cubic mtr as per approved colour.

Remove unserviceable hand rest and supply and fixing new hand rest matching the old hand rest.

Removing of unserviceable MS hollow pipe frame and replacing with new Cantilever type powder coated MS hollow pipe frame made out of 25mmx10mm section as per existing gauge/size complete all as specified.

Removing of damaged/ unserviceable Newar/canning from Chair Verandha and canning with 4 mm wide cane shall be used, canning shall be Godrej pattern all as per shown in drawing (colour of white / ivory) and all as directed by Engr-in-charge. Drg: FD-256

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel white finish complete all as specified.

Removing old unservicable ply top from Charpoy GI pipe fixing 12mm thick ISI mark Plywood BWR grade commerical both face of required size of Charpoy GI pipe. Charpoy shall be tightened before fixing ply all as specified and directed by Engineer-in-Charge. Drg: FD 220.

S & F and removing of damaged GI long rails of charpoy GI pipe 32 mm dia and to replace the same with new 32 mm dia GI pipe medium grade duly threaded (minimum 10 threads for each ends) IS-1239 all as shown in drawings. Note :- Long rails obtained shall be converted into short rail/leg and shall be paid under relevent items.

Conversion of long rails rails into short rails from the long rails obtained vide item No.6.01 above duly threaded as directed

Conversion of short rails obtained vide items No 6.01 & 6.02 into legs and replacing in charpoy GI pipes duly threaded by removing damaed legs as directed

Removing unserviceable GI Elbow 32 mm from GI charpoy and replace the same with new ISI marked medium grade GI elbow three way 32 mm.

Tightening of loose charpoy GI pipe complete with all respect and all as per directed by Engr-in-charge.

Repairs to Table bed side (MAP) by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-Charge.Drg : FD/E6/MAP/15(R)

The whole body, drawers front/ top shall be made with 18/19 mm thick pre laminated particle board of BWR Grade conforming to item No 7.00 above to match with existing design.

Removing old unservicable ply from drawers and fixing new 12mm thick ISI marked Plywood BWR grade commerical of suitable size conforming to item No 7.00 above to match with existing design complete all as specified and directed.

Removing old unservicable ply from drawers and back side and fixing new 6mm thick ISI marked Plywood BWR grade commerical of suitable size conforming to item No 7.00 above to match with existing design complete all as specified and directed.

Front leg made of 18mm MS square pipe black power coated alongwith shoes.

Rear leg made of 18mm MS square pipe black power coated alongwith shoes.

Drawer Runner/slide channel suitable for item No 7.00 above to match with existing design all as specified and directed.

CP Handle item No 7.00 above to match with existing design.

Tightening existing joints using new beading duly applying fevicol of existing size as shown on drawings.

Repairs to Chair CBA Steel by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-charge. Drg No:FD-75 (M)

Removing unserviceable damage seat frame and replacing the same with new seat frame made out of second class hard wood with canning (Godrej pattern)

Removing unserviceable damage back frame and replacing the same with new back frame made out of second class hard wood with canning (Godrej pattern)

Removing unserviceable damage wooden handle and replacing the same with new second class hard wood handle duly black polished complete all as specified

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black finish complete all as specified.

Repairs to Almirah large steel by taking out the following worn-out components without damaging the existing components and replacing the same with new componets all as per drawing Drg No: FD-84(M), 1031

S&F lock, CPBs flat with duplicate keys & brass levers and side pin.

S&F MS handle, CPB not less than 120mm long fixed with bushes nut and washers etc.

S&F MS retainer clips suitable for fixing shelves.

Repairs to Legs & Base incl welding and replacing the old unservicable sheet including one coat of redoxide paint as directed.

M&L for one coat for synthetic enamel paint OG to the external steel surfaces after removing dust gresse / removal of dents& welding whereever necessary incliding painting the key Nos of size painted /stenciled in front of doors of the almirahs with white paint

Repairs to Charpoy IP with Hard top by taking out the following woron out components without damaging the existing components and replacing the same with new componets all as pr drawing and as directed by Engr-in-charge all as directed. Drg No: FD/E6/MAP/08 (R )

Removing old unservicable ply top and fixing new 12mm thick ISI marked Plywood BWR grade commerical of required size suitable for item No 10.00 above with to match with existing design all as specified and directed by Engineer-in-charge

Removing unserviceable Middle Support and replacing with new Middle Support 25mmx25mm mild steel (18 gauge) complete all as specified.

Removing unserviceable leg and replacing with new leg 32x32mm mild steel (16G) complete all as specified.

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black finish complete all as specified.

Repairs to Almirah med steel by taking out the following worn-out components without damaging the existing components and replacing the same with new componets all as per drawing Drg No: FD-84(M), 1032

S&F lock, CPBs flat with duplicate keys & brass levers and side pin.

S&F MS handle, CPB not less than 120mm long fixed with bushes nut and washers etc.

S&F MS retainer clips suitable for fixing shelves.

Repairs to Legs & Base incl welding and replacing the old unservicable sheet including one coat of redoxide paint as directed.

M&L for one coat for synthetic enamel paint OG to the external steel surfaces after emoving dust gresse / removal of dents & welding whereever necessary incliding painting the key Nos of size painted /stenciled in front of doors of the almirahs with white paint

Repairs to table office officer /clerk steel by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-Charge. Drg : FD-84(M) 1003, 1004, 1005

Removing unserviceable steel drawers and replacing the same with new drawers, shall be made out of 1 mm thick M.S. sheet

Removing unserviceable leg and replacing leg 25 mm square 16 gauge M.S. hallow pipe and fixing the same by welding to the table in place of removed components

Removing unserviceable locks and replacing the same with new lock, made out of steel body with six brass levers (Godrej pattern) with duplicate keys

M&L for one coat for synthetic enamel paint OG to the external steel surfaces after emoving dust gresse / removal of dents & welding whereever necessary incliding painting the key Nos of size painted /stenciled in front of doors of the almirahs with white paint

Taking out the following worn out components of table dining OR's without damaging the existing component and replacing the same with new components made out of 25 mm square 16 guage M.S. hollow pipe and fixing the same by welding to the table in place of removed components all as per drawing and directed by Engr-in-charge Drg:FD-165

Long rail

Short rail

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black finish complete all as specified.

Repairs to Chair Verandah steel/Chair Verandah with PVC Seat by taking out the following worn-out components without damaging the existing components and replacing the same with new componets all as per drawing Drg No: FD/E6/MAP/11, FD - 256, FD/MAP- II/06

MS Flat

Supply and fixing of PVC seat and back shall be of 4mm thick with weight not less than 1.85 kg /each and grooves 90 x 10 mm 10 Nos seat and back

Welding at any point

M&L for painting to the external steel surfaces duly cleaning the surface with emery paper providing one coat of synthetic enamel black/white paint.

Taking out the following worn out components of form with /with out back without damaging the existing components and replacing the same with new components made out of 25 mm square 16 guage M.S. hollow pipe and fixing the same by welding to the table in place of removed components all as per drawing and directed by Engr-in-charge. Drg: FD-77(M) 78(M)

Leg frame

Back frame

Stiffner

Seat 1800x255x25mm

Back 1800x150x25mm

M&L for painting to the external steel surfaces duly cleaning the old surfaces woth emery paper providing one coat of synthetic enemal paint complete all as specified and directed

Repairs to Chair with hand writing pad by taking out the following worned out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-charge. Drg No: FD 260

Removing unserviceable damage seat frame and replacing the same with new seat frame made by second class hard wood with canning (Godrej pattern)

Removing unserviceable damage back frame and replacing the same with new seat frame made by second class hard wood with canning (Godrej pattern)

Removing unserviceable damage wooden handle and replacing the same with new Second class hard wooden handle

Removing unserviceable Writing pad and replacing with new writing pad made out of 18mm thick pre-laminated particle board one side laminated.

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel paint complete all as specified.

Taking out the following worn out components of table 3' x 3' steel without damaging the existing component and replacing the same with new components made out of 25 mm square 16 guage M.S. hollow pipe and fixing the same by welding to the table in place of removed components all as per drawing and directed by Engr-in-charge Drg No: FD-88(M), 291

Legs along with shoes

Short Rails

Long rails

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel paint complete all as specified.

Repairs to table 3'x2' without drawer steel/ Table 3'x2' with drawer/ for typist steel by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-Charge. Drg : FD-1006,1007,1008,1009

Removing unserviceable steel drawers and replacing the same with new drawers, which shall be made out of 1.6mm thick M.S. sheet

Removing unserviceable legs and replacing legs 25 mm square 16 gauge M.S. hollow pipe and fixing the same by welding to the table in place of removed components

Removing unserviceable long rails and replacing legs 25 mm square 16 gauge M.S. hollow pipe and fixing the same by welding to the table in place of removed components

Removing unserviceable short rails and replacing legs 25 mm square 16 gauge M.S. hollow pipe and fixing the same by welding to the table in place of removed components

Removing unserviceable Stiffners and replacing stiffners with 25 mm square 16 gauge M.S. hollow pipe and fixing the same by welding to the table in place of removed components

Removing unserviceable locks and replacing the same with new lock, made out of steel body with six brass levers with duplicate keys

Removing unserviceable Hard rubber toe and replacing the same with new Hard rubber toe

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel paint complete all as specified.

All as per item No.1.01 above but BED HARD for following items :- Drg No: FD-21(M)

Foot Board of size as shown in Drg complete

Head Board of size as shown in Drg complete

Long rail 1980x100x35mm

Short Rails of size as shown in Drg

Supports of size 50x50x900mm

Plywood 12 mm thick (BWR Grade) of size as shown in Drg complete

M & L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces .

All as per item No.1 above but Sofa set 4/2 seater for following items :- Drg No : FD 281/258

Front legs alongwith shoes of size shown in drawing

Rear legs alongwith shoes of size shown in drawing

Back and seat stiffener of size shown in drawing

Hand rest of size shown in drawing

Supply only foam cushion 32 to 40 density for seat/back with new tapestry cloth superior quality tapestry duly approved by Engr-in-charge Drg:FD-258, 281 )

M & L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces

Removing old unservicable table top and fixing new 18/19 mm thick ISI marked Pre-laminated paricle board one side teak face as per existing size suitable for item No. 1.00, 12.00 and 13.00 above to match with existing desgin complete all as specified and directed

M/S Tanisha Traders (BID ID -3423474)

SK INDUSTRIES (BID ID -3420519)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3421528)

SNEH CORPORATION (BID ID -3423265)

M/s godara infratech and power industries (BID ID -3423592)