Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical ELIGIBLE |
| 2 | Accepted-Technical | Accepted-Technical ELIGIBLE |
| 3 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹72,700
Closing Date
8 May 2026, 3:30 pmClosed
Executive Engineer (E ) BM-II
BM-II (E) Division, Gyan Mandir Office Complex, Tees January Lane, New Delhi - 110011
Supplying installation testing and commissioning of ventilation system at basement of car parking at Palika Bhawan under BM-II(E) Division
2026_NDMC_290559_1
04/EE(E)BM-II/2026-27
Open Tender
Electrical Works
Percentage
30 days
basement of car parking at Palika Bhawan
As per NIT
2 documents required · 2 mandatory
₹0
₹72,700
13 May 2026
29 Apr 2026
8 May 2026
29 Apr 2026
8 May 2026
29 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply installation testing and commissioning of Single Skin Cabinet Inline Fan at approx height of 10 ft. from the bottomof surface having Capacity - 4000 CFM, Static Pressure - 20 mmwg, Fan speed - 1400 rpm, Motor - 1.5 hp motor/4 pole/ three phase induction motor, Drive – belt driven with the help Canvas Connection Fire Proof, Fastener, Nut Bolt tightly fixed on thread rod of 8mm, etc of hanging arrangement at various place in basement car parking at Palika Bhawan. | 7 | Per Job | 2,25,000 | ₹15,75,000 |
| 2 | Supply, Fabrication & installation of G.l. duct of 22 SwG as persite requirement and hanging materials, supports nuts bolts,painting complete as per site requirement with the help of ladder/scaffolding as requiredat site. | 550 | Per sqmt | 3,300 | ₹18,15,000 |
| 3Supplying and drawing of following XLPE aluminium conductor armoured power cable of 1.1 KV grade including saddling and proper fixing etc as required at site | |||||
| 3.01 | 3.5 x 50 sq mm | 50 | Per Mtr. | 400 | ₹20,000 |
| 3.02 | 6 x 4 sqmm | 350 | Per Mtr. | 150 | ₹52,500 |
| 4 | Fabrication, Supply and Installation of outdoor type panel with
Compartmentalized and cubicle type front operated(with hinged double door at front)fabricated out of 2.0 mm thick sheet steel totally enclosed, weather proof, dust and vermin proof,suitable for 415 volts, 50 Hz, AC supply, sectionalized gland plates at bottom And having following switch gear, painting with one coat of zinc chromate primer and two coats of enamel/aluminium paint of approved colours, erection on suitable brick pedestal testing and commissioning etc as required.
INCOMER DETAILS:
a) 125 Amps, 36KA (Ics = 100% Icu ), 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for OL / SC release, phase barrier, spreaded terminal, extended rotary handle etc. – 1 No.
BUS BAR:
a) TPN Aluminium bus-bars of minimum 125A capacity with heat shrinkable coloured sleeves and FRP/DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec.
OUTGOING
a) 32 Amps, 16KA (I cs = 100% Icu ), 415 Volts, 50Hz, 4 pole MCB with thermal-magnetic based release for OL / SC release, phase barrier,spreader terminal, extended rotary handle Neutral Link etc. – 7 Nos (For 7Nos inline fans )
b) DigitalVoltmeter–1No.
c) DigitalAmmter–1No.
d) Indicators -10 Nos
e) Push button set – 7 Nos
f) DOL Starter – 7 Nos | 1 | Per Job | 1,00,000 | ₹1,00,000 |
| 5 | SITC of aluminium powder coated linear grill of size 600x150mm with volume control damper | 25 | Nos | 2,000 | ₹50,000 |
| 6 | SITC of aluminium powder coated linear grill of size 600x150mm without volume control damper | 15 | Nos | 1,500 | ₹22,500 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.02 MB
BOQ_385621.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .