Renovation of School building in PU Primary School at kanmaisoorangudi village of soorangudi panchayat

Amount

RENOVATION OF SCHOOL BUILDING (PU PRIMARY SCHOOL)

Chipping concrete surface

Removing the existing AC sheet without roof tembers

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete

Paving the floor with Kotta Green tiles of size 60cm X 60cm X 1.8 to 2 cm thick in Cement mortar 1:3 etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position of colour PUF panel sheet roofing (50mm thick, Galvalume sheet of 0.47mm thick at top and 0.40mm thick at bottom and PUF density of 40Kg/cu.m.) with all necessary accessories complete

Distembering two coats with best approved distember including all cost and conveyance of all materials to site and all labour charges etc completeetc., complete.

Plastic Emulsion paint using best quality and approved cemet paint over the one coat cement priemer including all cost and conveyance etc., complete.

Painting Two coats with enamel paint for Old Steel Door including all cost and conveyance of materials & labor charges etc complete

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box in flush with wall with 3mm thick hylum sheet for 15A 3pin non interlocking flush type CS plug with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for open power plug point - SD 14

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) SD - 18

4'40W fluorescent tube light with Fitting SD 88

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") - SD 110

Providing Ramp arrangement

Brick work in cement mortar 1:5 (one cement five sand) using country Bricks ground moulded of size 23x11x7 cm. for the following including curing etc., complete complying with standard specification.

Plastering with Cement Mortar 1:5 (one cement and three sand) 12 mm. thick in all floors including curing etc., complete complying with standard specification and as directed

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 including curing etc., complete complying with standard specification.

Plastic Emulsion paint using best quality and approved cemet paint over the one coat cement priemer including all cost and conveyance etc., complete.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

M GURUSAMY