Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.1 L+₹1.8 L (5.29%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹35.5 L+₹2.2 L (6.62%)Rejected-AOC | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹36.9 L+₹3.5 L (10.6%)Rejected-AOC A 91 DEFENCE COLONY AGRA CANTT AGRA UP 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹37.6 L+₹4.3 L (12.9%)Rejected-AOC | L5 | Rejected-AOC Other than L1 |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
30 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mathews M Shepherd, GE
GE (W) Mathura
REPAIR/MAINT OF HARD STANDING, REPAIR TO SHUTTER, PLASTERING AND CERTAIN MISC WORK OTM ACCN UNDER GE (W) MATHURA
2023_MES_573216_1
8300/1119/E8
Open Tender
Civil Works
Item Rate
180 days
Mathura Cantt
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Mathura
₹92,000
Yes
3 Mar 2023
9 Jan 2023
31 Jan 2023
9 Jan 2023
30 Jan 2023
18 Jan 2023
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even external surface complete all as specified and directed. Note: this item will be executed in G+2 floor bldg.
M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar (1:4) complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of cement based paint over one coat of cement primer on walls complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a one coat of primer on walls complete all as specified and directed.
M&L for preparation of new plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.
M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections/ceiling/facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note : Rate for form work if required shall be deemed included in the unit rate quoted by the contrator.
M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper over a coat of 1mm thick wall putty on wall etc complete all as specified and directed.
M&L for preparation of old painted surface of any descpription and applying one coat of weather coat paint of Dark Shade, complete all as specified and directed.
M&L for preparation of old treated surfaces of walls including cornices pillars etc and applying one coat of white wash on walls complete all as specified and directed by Engr-in-Charge.
All as per item No 11.00 (here-in-before) but on ceiling.
M&L for preparation of old plaster surfaces of walls and applying one coat of cement based paint on walls complete all as specified and directed.
M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and treating oil and greasy spots and applying one coat of oil bound distemper oil emulsion white or tinted complete all as specified and directed.
M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops , dirts and splashes etc.complete all as spcified.
M&L for preparation of old wooden surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops , dirts and splashes etc.complete all as spcified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed
M&L coloured Non Skid ceramic tiles 8 to 9 mm thick, (Square/rectangular) area of each tile exceeding 0.18 sqm n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles including and over 15 mm thick screed bed in CM (1:4) complete all as specified and directed.
S&F for glazed ceramic tiles 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to the match tiles on vertical surface over 10mm thick plastering in CM (1:3) complete all as specified and as directed
M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.
All as per item No 21.00 (here-in-before) above but as in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L for vitrified paving tiles (any colour) of size 300 x 300 x 10mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 15mm screed bedding in cement mortar (1:4) complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in skirting/dado including 12mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Taking down eaves gutters and rain water pipes, soil, waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
M&L 100mm CI pipes soil, waste and vent pipe centrifuglly spun cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.
S&F for 100mm CI pipes soil, Bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.
S&F 100mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.
S&F 100mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F 100mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.
M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L 75mm CI pipes soil, waste and vent pipe centrifuglly spun cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.
S&F for 75mm CI pipes soil, Bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed.
S&F 75mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.
S&F 75mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F 75mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) bends any radius 100 mm bore complete all as specified and directed.
S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls including all fittings complete all as specified and as directed.
S&F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls including all fittings complete all as specified and as directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius of 75 mm bore, complete all as specified and directed.
S&F PVC (SWR) junction single, (Single Y) equal or unequal 75 mm bore complete all as specified and directed.
S&F PVC (SWR) junction single, (Single Y) equal or unequal 110 mm bore complete all as specified and directed.
S&F in repair fancy type wash hand basin mixture hot and cold, long sunk single lever, quarter turn with form flow complete all as specified and directed.
S&F in repairs 3-in-1 wall mixer including stainless steel cromium plated telephonic hand shower 90mm dia with three flow including wall hook and 1.5mtr hose long for iron pipe and fixed complete all as specified and directed.
S&F in repair 15mm bore CP pillar taps Fancy type cast copper alloy with aerator single lever quarter ton with form flow for GI pipe complete all as specified and directed.
S&F in repair fancy type Bib Cock long nose sunk with wall flange and aerator, single lever, quarter turn with form flow complete all as specified and directed.
S&F in repair fancy type kitchen sink mixer (hot and cold) single lever (wall mounted) with 235mm (9'') long sunk swil spout and 450 mm long braided connection pipe including dual PVC/Chromium plated connection complete, quarter turn with form flowcomplete all as specified and directed.
M&L for cutting holes in brick walls exceding half brick wall but n.exc one brick wall, built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed.
Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering, including ridges, hip, valleys and flashing etc complete all as specified and directed.
S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel ridges suitable for corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirmed to Fe-410- W(Gde- E-250) quality including dismantling complete all as specified & directed.
M&L for application of two coat of synthetic enamel paint over a coat of primer on with preparing new plastered/ concrete surfaces in kerb stone of foot path with different tints in alternate strips matching to existing etc after necessary preparation all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description)from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S&F 4.00 mm thick sheet glass,ordinary quality and glazing with oil putty in squares not exceeding 0.50 sq.m. in each pane complete all as specified and directed.
S&F tinted glass 5 mm thick in glazing to aluminium door, window & partition including pad, gasket, complete all as specified and directed.
S&F figured glass 4.00mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pane complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position such as RCC fins,Chajjas etc (reinforcement cut as required to facilitate demolition) including making good using in CM (1:4) plaster to make the match with existing surface complete all as specified and directed.
M&L for 30mm thick (measured solid) precast cement concrete louvers and jallies type B-0 mix (1:2:4) (using 12.5mm graded stone aggregates) including all mouldings but excluding frame set in CM (1:4) complete all as specified and directed.
M&L for servicing of rolling shutter incl oiling, greasing and easing with all replacement of necessary fittings for smooth functioning of rolling shutter and with one coat of synthetic enameled paint to steel surface complete all as specified and directed.
S&F steel rolling shutters 1.25mm thick without ball bearing as specified inlcuding top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type including taking down old unserviceable shutter complete all as specified and directed.
S&F in repair PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed.
S&F in repair PVC Syphon kit assembly in existing flushtank, complete all as specified and directed.
S&F in repair float valve of 20 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repair PVC cover for PVC Water tank 500/750/1000ltr capacity with thread type self locking arrangement, complete all as specified and directed.
M&L for Hard drawn welded steel wire fabric cut to length wt n exc 4.0 kg/sqm, bent to shape required and tying with & including mild steel wire (annealed ) not less than 0.9 mm dia supplied & fixed to steel members complete all as specified and directed.
S&F 10mm dia and 75mm long anchor bolt stainless steel with drilling fastner machine compressed in wall/ ceiling complete all as specified and directed.
VANI CONSTRUCTION
M/S MRS BHASKAR
M/s Shrangi Rishi Construction
Deepak Saxena
Ms Kamal Kant Agarwal
CHOPRA ENTERPRISES
M/s Hoti Lal Contractor
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .