GE(W)/HSR-48/2023-24 SPL REPAIR/REPLACEMENT OF INTERNAL WIRING AND CONNECTED ITEMS IN CERTAIN BLDGS AND POST OF SASF BHOJRAJ AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Taking down carefully copper/aluminium point wiring (light/fan/socket) complete with all accessories such as switches, sockets, celing rose, wall brackets etc fitted and removing dismantled material & making good disturbed surfaces of walls/floor etc and matching with existing surface complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) in existing concealed surface conduit for one light point /fan point controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth and connecting to earth dolly and including new MS Sunken box and incl 3 mm thick laminated sheet ISI Marked top cover etc complete all as specified and directed.

All as per item No 2.00 here in before but for socket outlet 5 pin 5 Amp on same board complete all as specified and directed.

All as per item No 2.00 here in before but for socket outlet 5 pin 5 Amp on independent board but not below the switch board complete all as specified & directed.

All as per item No 2.00 here in before but for socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

All as per item No 2.00 here in before but one light point controlled by two two way switch complete all as specified and directed.

All as per item No 2.00 but in and including PVC concealed/surface conduit not less than 20 mm dia (medium quality ISI marked) and conduit fittings and MS Sunken box of suitable size covered with and incl 3 mm thick bakelite laminated sheet top cover etc including cutting of chases and making good the disturbed surface complete all as specified and directed.

All as per item No 7.00 here in before but for socket outlet 5 pin 5 Amp on same board complete all as specified and directed.

All as per item No 7.00 here in before but for socket outlet 5 pin 5 Amp on independent switch board complete all as specified and directed.

All as per item No 7.00 here in before but for socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

S & F 6 Amps Switch with frame 250 volts AC one way ISI marked complete all as specified and directed.

S & F 6 Amps Switch with frame 250 volts AC two way ISI marked complete all as specified and directed.

S & F 6 Amps Socket with frame 5 pin 250 volts AC complete all as specified and directed.

S & F Switch 16 Amps with Frame 250 volts AC ISI marked complete all as specified and directed.

S & F Socket outlet universal 6 pin 6/16 Amps multi purpose, 2 in 1 with Frame 250 volts AC shuttered ISI marked complete all as specified and directed.

S&F Fan regulator Electronic step type (1-4), socket type 230- 240 volt AC supply with frame complete all as specified incl taking down old unservice able regulator complete all as specified and directed.

S & F ceiling rose 3 plate flush type 6 Amp 250V AC topline series with polycarbonate two to three terminal complete all as specified and directed.

S & F Batten holder 2 Amp 250V AC with skrit ISI marked top line series , polycarbonate cased body of brass with back plate suitable for batten fittings with LED bulb 9/10 watt B22 base 6000K complete all as specified and directed..

Supply and fixing wall mounted LED Batten T-8 Retro LED 18/20 watt, appx 4 feet long, pre wired including LED tube light, not less than 6000K, integrated electronic driver complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector complete all as specified and directed.

Supply and fixing LED light fitting 1 feet 5 watt including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make-Havells , Bajaj CG Syska or equivalent as approved by accepting officer. Make-Havell's, Bajaj CG, Wipro, Osram, Syska or equivalent as approved by accepting officer.

M & L for LED Mirror light fitting of 9/10 watt, 6000 K, complete ready to use in all respect and complete all as specified and directed.

S & F New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 luminaire with high power LED of 25 watt with toughened glass complete with GI bracket (01 No) MS clamps (02 Nos) suitable for security light fitting fixing to wall / column & electrical connection to the light fitting providing 1.5 mtr long three core 1 Sqmm round copper conductor cable of suitable size and testing complete all as specified and directed.

Supply and fixing in replacement energy efficient LED high mast light fitting of 120 Watt epoxy powder coated pressure die cast aluminium housing to act as heat sink for efficient dissipation of heat and toughened glass with IP 66 degree of protection, system luminous efficiency more than 100 lumens / watt individual LED's should have lenses for better throw across and along road, PF>0.9 with voltage range 140 to 270 Volt, fitting should be provided with inbuilt 10 KV minimum surge protection, short circuit and over voltage protection facility for Driver and fitting including making electrical connection complete all as specified and directed.

M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi -stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 sqmm in existing PVC concealed conduit incl taking down old unserviceable submain wiring complete all as specified and directed.

M & L for submain wiring complete with two single core 4 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 Sqmm in & including PVC conduit size 20 mm incl taking down old unserviceable submain wiring complete all as specified and directed.

M & L for submain wiring complete with two single core 6 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 Sqmm in & including PVC conduit size 20 mm incl taking down old unserviceable submain wiring complete all as specified and directed.

S & F sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal double door, powder coated MCB DB TPN 4 way 415 Volts AC, 8+12 module with provision of TP MCB / Isolator as incomer and MCBs SP as outgoing complete all as specified and directed. Make : - Legrand/ L&T/ Schineder.

S & F sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 12 way 230 V AC with 200 Amp rated bus bar, Double Door,12 modules, dust and vermin proof suitable for incorporation of MCB's and isolators etc incl taking down old unserviceable MCB DB's complete all as specified and directed.

S & F sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 08 way 230 V AC with 200 Amp rated bus bar, Double Door,8 modules, dust and vermin proof suitable for incorporation of MCB's and isolators etc incl taking down old unserviceable MCB DB's complete all as specified and directed.

S & F sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 04 way 230 V AC with 200 Amp rated bus bar, Double Door,4 modules, dust and vermin proof suitable for incorporation of MCB's and isolators etc incl taking down old unserviceable MCB DB's complete all as specified and directed.

S&F of single pole ond neutral enclosure with two pin and earth plug and metal top complete with one single pole MCB 20 Amps complete all as specified and directed.

S & F MCB SP suitable for 230 volts AC supply 6 to 40 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked, 1 Module incl taking down old unserviceable MCB SP complete all as specified and directed.

S & F MCB DP 40 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment incl taking down old unserviceable MCB SPN complete all as specified and directed.

S & F MCB TP 63 Amps 415 Volt AC, C curve, 4 module capacity not less than 10 KA incl taking down old unserviceable MCB TPN complete all as specified and directed.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level), with top edge of the plate vertically to depth of not less than 1.5 m below normal ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl PCC cover and , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed. (Note : PCC chamber shall be constructed at least 1.5m away from earth pit pipe for watering shall be provided in slanting manner)

YASHU CONTRACTORS

M/s Rao Constructions, 1173 Urban Estate-II, Hisar

KUNAL ENTERPRISES

M/S SURJIT CONSTRUCTION COMPANY

M/S RAJESH KUMAR & SONS

Natwadia Electrical Company