Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹69.3 Cr
EMD Value
₹15 L
Closing Date
21 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CE BAREILLY ZONE
HQ CHIEF ENGINEER BAREILLY ZONE
PROVN OF UNDER GROUND STORAGE SHEDS WITH CONNECTED INFRASTRUCTURE AT SUMDO AND KHAB
2026_MES_798859_1
CEBZ/DDN(H)/T-33 of 2026-27
Open Tender
Civil Works
Lump-sum
610 days
SUMDO and KHAB
Please refer Tender documents.
8 documents required · 8 mandatory
₹3,000
GE 863 EWS
₹15 L
Yes
BAREILLY
16 Nov 2026
16 Nov 2026
28 Dec 2026
16 Nov 2026
21 Dec 2026
14 Dec 2026
1 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SCHEDULE 'A' PART-I A
(BUILDING WORK : CSP STRUCTURE ) | - | - | - | - |
| 2 | Design & developed all drawings and Construction of RCC collection chamber with size 1.5m x1.5m x 2m at Sumdo Location as per scope of work specified in Schedule 'A' Notes , including excavation in hard dense soil, returning filling & removal of surplus soil , PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) in foundation base, RCC in M-30 (Design Mix) with TMT reinforcement, necessary form work for raft footing, RCC walls, sub base, floor, plinth protection, Steel roof trust in angle, tee etc with PPGI roof sheet , including external, internal & steel surface painting etc And for structure references and other specifications should be taken from the scope of work (Schedule 'A' Notes) & DBR, complete all as per final approved drawings, specified and directed. | 1 | Each Block | - | - |
| 3 | Complete Structural Design & Development, Engineering, Preparation of Complete Engineering and Construction Drawings, Vetting of Structural Design and Drawings by IIT, Supply of All Fabricated CSP Components, Construction, Erection and Installation of a Hybrid Underground, Soil-Embedded Storage Shed (Ammunition Bunker) at Upper Sumdo Location, comprising a curved-roof structural system made of Deep Corrugated Steel Plates (CSP) with a minimum plate thickness of 6.00 mm, supported on Reinforced Cement Concrete (RCC) foundations and walls, including all associated RCC structural works. The bunker shall have a minimum clear internal floor dimension of 13.30 metres (Length) × 9.30 metres (Width) × 4.20 metres (Height, from finished floor level to the crown of the curved arch roof), designed for a total storage capacity of 30 MT (3 × 10 MT) and All structural references, technical parameters, design criteria, construction requirements, material specifications and other applicable provisions shall be strictly adopted and complied with as stipulated in the Scope of Work (Notes to Schedule 'A'), Design Basis Report (DBR) and the attached Indicative Layout Plan. The work shall be executed in its entirety in accordance with the final IIT-vetted and approved structural design, final approved drawings, technical specifications and instructions issued by the competent authority/Engineer-in-Charge | 1 | Each Block | - | - |
| 4 | Complete Structural Design & Development, Engineering, Preparation of Complete Engineering and Construction Drawings, Vetting of Structural Design and Drawings by IIT, Supply of All Fabricated CSP Components, Construction, Erection and Installation of a Hybrid Underground, Soil-Embedded Storage Shed (Ammunition Bunker) at Lower Sumdo Location, comprising a curved-roof structural system made of Deep Corrugated Steel Plates (CSP) with a minimum plate thickness of 6.00 mm, supported on Reinforced Cement Concrete (RCC) foundations and walls, including all associated RCC structural works. The bunker shall have a minimum clear internal floor dimension of 19.30 metres (Length) × 9.30 metres (Width) × 4.20 metres (Height, from finished floor level to the crown of the curved arch roof), designed for a total storage capacity of 60 MT (3 × 20 MT) and All structural references, technical parameters, design criteria, construction requirements, material specifications and other applicable provisions shall be strictly adopted and complied with as stipulated in the Scope of Work (Notes to Schedule 'A'), Design Basis Report (DBR) and the attached Indicative Layout Plan. The work shall be executed in its entirety in accordance with the final IIT-vetted and approved structural design, final approved drawings, technical specifications and instructions issued by the competent authority/Engineer-in-Charge | 1 | Each Block | - | - |
| 5 | Complete Structural Design & Development, Engineering, Preparation of Complete Engineering and Construction Drawings, Vetting of Structural Design and Drawings by IIT, Supply of All Fabricated CSP Components, Construction, Erection and Installation of a Hybrid Underground, Soil-Embedded Storage Shed (Ammunition Bunker) at 04 gun Posn Sumdo Location, comprising a curved-roof structural system made of Deep Corrugated Steel Plates (CSP) with a minimum plate thickness of 6.00 mm, supported on Reinforced Cement Concrete (RCC) foundations and walls, including all associated RCC structural works. The bunker shall have a minimum clear internal floor dimension of 19.30 metres (Length) × 9.30 metres (Width) × 4.20 metres (Height, from finished floor level to the crown of the curved arch roof), designed for a total storage capacity of 60 MT (3 × 20 MT) and All structural references, technical parameters, design criteria, construction requirements, material specifications and other applicable provisions shall be strictly adopted and complied with as stipulated in the Scope of Work (Notes to Schedule 'A'), Design Basis Report (DBR) and the attached Indicative Layout Plan. The work shall be executed in its entirety in accordance with the final IIT-vetted and approved structural design, final approved drawings, technical specifications and instructions issued by the competent authority/Engineer-in-Charge | 2 | Each Block | - | - |
| 6 | Complete Structural Design & Development, Engineering, Preparation of Complete Engineering and Construction Drawings, Vetting of Structural Design and Drawings by IIT, Supply of All Fabricated CSP Components, Construction, Erection and Installation of a Hybrid Underground, Soil-Embedded Storage Shed (Ammunition Bunker) at Upper Khab Location, comprising a curved-roof structural system made of Deep Corrugated Steel Plates (CSP) with a minimum plate thickness of 6.00 mm, supported on Reinforced Cement Concrete (RCC) foundations and walls, including all associated RCC structural works. The bunker shall have a minimum clear internal floor dimension of 13.30 metres (Length) × 9.30 metres (Width) × 4.20 metres (Height, from finished floor level to the crown of the curved arch roof), designed for a total storage capacity of 30 MT (3 × 10 MT) and All structural references, technical parameters, design criteria, construction requirements, material specifications and other applicable provisions shall be strictly adopted and complied with as stipulated in the Scope of Work (Notes to Schedule 'A'), Design Basis Report (DBR) and the attached Indicative Layout Plan. The work shall be executed in its entirety in accordance with the final IIT-vetted and approved structural design, final approved drawings, technical specifications and instructions issued by the competent authority/Engineer-in-Charge | 1 | Each Block | - | - |
| 7 | Complete Structural Design & Development, Engineering, Preparation of Complete Engineering and Construction Drawings, Vetting of Structural Design and Drawings by IIT, Supply of All Fabricated CSP Components, Construction, Erection and Installation of a Hybrid Underground, Soil-Embedded Storage Shed (Ammunition Bunker) at Lower Khab Location, comprising a curved-roof structural system made of Deep Corrugated Steel Plates (CSP) with a minimum plate thickness of 6.00 mm, supported on Reinforced Cement Concrete (RCC) foundations and walls, including all associated RCC structural works. The bunker shall have a minimum clear internal floor dimension of 19.30 metres (Length) × 9.30 metres (Width) × 4.20 metres (Height, from finished floor level to the crown of the curved arch roof), designed for a total storage capacity of 60 MT (3 × 20 MT) and All structural references, technical parameters, design criteria, construction requirements, material specifications and other applicable provisions shall be strictly adopted and complied with as stipulated in the Scope of Work (Notes to Schedule 'A'), Design Basis Report (DBR) and the attached Indicative Layout Plan. The work shall be executed in its entirety in accordance with the final IIT-vetted and approved structural design, final approved drawings, technical specifications and instructions issued by the competent authority/Engineer-in-Charge | 1 | Each Block | - | - |
| 9 | (ii) Earthwork: Excavation in hard and dense soil, returning, filling, compaction and disposal of surplus excavated soil for the construction of the soil-embedded underground storage shed (Ammunition Bunker) with CSP curved-roof structure. The excavation shall commence from the lowest ground level as finalized by the GE at site and shall be carried out to the lines, levels, dimensions and profiles stipulated in the final approved drawings.
(iii) Superstructure: Construction of the RCC superstructure, including front head wall, rear closure/retaining wall, side RCC walls, necessary structural supports and arrangements for fixing and anchoring the CSP curved-roof structure. RCC partition walls shall also be provided for segregation of the storage compartments. The finished floor level (FFL) shall be maintained at a minimum height of 450 mm above the adjoining road level, or as specified in the final approved drawings.
(iv) CSP Curved-Roof Structure: Providing, supplying, fabricating and installing Deep Corrugated Steel Plates (CSP) of minimum 6.00 mm thickness for the curved-roof structure, including all associated structural steel components such as crown members, trusses, purlins, cleats, connection plates, base plates, anchor bolts, fasteners, welding and other accessories, complete as per the final approved structural design and DBR. | - | - | - | - |
| 10 | (v) Waterproofing: Providing complete waterproofing treatment to all RCC structures and the CSP curved-roof structure, including suitable protective coatings, membranes, joint treatments and associated accessories, as specified in the approved design and technical specifications. The waterproofing system shall carry a minimum warranty/guarantee period of 10 years.
(vi) Internal Electrification: Providing complete flame-resistant internal electrical installations, including suitable wiring, cables, conduits, fittings, fixtures, switches, distribution boards, protective devices and all necessary electrical accessories, complete as per the approved electrical design and applicable standards.
(vii) Heavy-Duty Door: Providing and installing heavy-duty, blast-resistant mild steel doors, including frames, hinges, locking arrangements, fixtures, fittings and all associated accessories, as per the final approved design and specifications. | - | - | - | - |
| 11 | (viii) Painting and Protective Coating: Providing fire-resistant/protective painting and coating systems to the specified surfaces of the RCC and structural steel/CSP components, including surface preparation, primer and finishing coats, complete as per the approved specifications.
(ix) RCC Flooring: Providing and constructing RCC flooring, including the required sub-base, reinforcement, concrete, finishing and associated works, complete as specified in the DBR and final approved drawings.
(x) HVAC System: Design, supply, installation, testing and commissioning of a complete HVAC system, including all required infrastructure, equipment, machinery, accessories, ducting, fittings, controls, electrical connections and DG set with associated accessories, as required for the intended storage facility and in accordance with the approved design. | - | - | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
TENDER.pdf
Tender Documents • 7.95 MB
BOQ_896202.xls
BOQ • 0.60 MB
drawings.pdf
Additional Documents • 1.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .