CA NO. GE (AF)/SGR-42/2024-25 REPAIR OF STATIC WATER TANK, FIRING RANGE, FENCING AND OTHER ALLIED MISC WORK UNDER GE(AF) SRINAGAR.

Amount

Dewatering for cleaning of SWT of capacaty exc 15,000 galon but n.exc 25,000 gallon, by dewatering from SWT, cleaning of entire internal surface with wirebrush remove all sludge and finaly cleaning with fresh water and appliying three coats of whitewash, writing date of cleaning with syjthetic enamel paint, complete all as specified and directed.

Dewatering for cleaning of SWT of capacaty exc 25,000 galon but n.exc 50,000 gallon, by dewatering from SWT, cleaning of entire internal surface with wirebrush remove all sludge and finaly cleaning with fresh water and appliying three coats of whitewash, writing date of cleaning with syjthetic enamel paint, complete all as specified and directed.

Dewatering for cleaning of SWT of capacaty exc 50,000 galon but n.exc 80,000 gallon, by dewatering from SWT, cleaning of entire internal surface with wirebrush remove all sludge and finaly cleaning with fresh water and appliying three coats of whitewash, writing date of cleaning with syjthetic enamel paint, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15mm thick Rendering in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth using integral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid seperately)

Supply only integral water proofing compound.

Preparation of newly plastered surfaces, and applying two coat of weather paint (Apex) paint over a coat of exterior primer colour and tint including 1mm thick wall care putty on wall sides and soffits of the beams, ceilings, fascias, parapets etc., complete all as specified and directed.

Complete removal of existing surface treatment from the old plastered, pointed/concrete surfaces vertical or horizontal including brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and applying two coats of weather paint (Apex) paint over a coat of exterior primer, colour and tint as approved by Eng-in-Charge in CCD pattern, height upto 15m including sides and soffits of the beams, ceilings, fascias, parapets etc, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 40mm thick PCC, 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor laid in alternate bay finished even and smooth without using extra cement, complete all as specified and directed.

M&L 75 mm thick PCC, 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight), complete all as specified and directed.

Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds, moss and efflorescence salts, trading oil greasy spots etc. and applying two coats of white wash, height upto 15m, complete all as specified and directed.

S&F in repairs 150mm tee hinges to angle iron cover with welding/nut bolt, complete all as specified and directed.

M&L in repairs welded steel wire fabric supplied welded mesh any size any shape fixed to iron frame inlcuding welding and necessary work required, complete all as specified and directed.

Preparation of old painted steel and iron surfaces of any description by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots of roof /CGI Sheets, steel gates, steel doors, steel rolling shutters, steel eves boards etc, exc 10cm width or girth applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling of old chain link fencing including flat iron, line wire, complete all as specified and directed.

Dismantling of RCC posts or struts embedded in concrete any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises, complete all as specified and directed.

Dismantling of RCC posts or struts embedded in natural ground any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises, complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in soft/loose soil, complete all as speciified and directed.

S&F MS 10 mm dia round bar Fe-410-w (grade E-250) quality-A as line wire for holding chain link mesh, complete all as specified and as directed.

M&L for MS flat iron clamp, Angle posts and struts in fencing cutting tops to shape as directed, drilling holes, notching for wire etc. Flat iron fillets (For securing chain link fencing etc) and similar work conforming to Fe-410-0, complete all as specified and directed.

Supply only MS galvanisd chain link fencing of size 65x65mm with nominal dia of mesh wire 4mm, complete all as specified and directed

Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc, complete all as speciified and directed. Note: (i) Supply only fencing, will be measured and paid separately. (ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately.

S&F mild steel bolts screw (machine made) with hexagonal or squre head at one end and scrw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or squre nut exceeding 10cm and not exceeding 15 cm long and dia meter of shank 05 to10mm, complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. (each line of wire to be measured), complete all as specified and directed.

Restringing and rescrubbing of old Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and making good staple etc. (each line of wire to be measured), complete all as specified and directed.

Preparation of newly steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Preparation of old steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 using old size brick, complete all as specified and directed.

All as per Ser item No 31.00 here in above but except bricks.

M&L for RCC,1:2:4 (nominal mix), type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface; not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for PCC, 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate) as in coping etc and the like including necessary form work if any, complete all as specified and directed.

M&Lr for providing cement concrete ,1:3:6, type C-2 (using 40mm graded crushed stone aggregate) for surface channel, drain and RCC post etc including necessary form work, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade with grey cement and pigment over and including 40 mm thick compacted bed of fine sand, complete all as specified and directed.

M&L for 75 mm thick cement concrete, 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) as in sub base, complete all as spciified and directed.

M&L for glossy finished rubber moulded machine pressed rubber moulded chequered tiles of any pattern/design of size 300mm x 300mm x 25mm thick laid over and including 15mm thick screed bed in CM 1:6 in floors paths etc, complete all as spciified and directed.

M&L for kerb stone of M-25 grade cement concrete, Factory made, in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

Dismantling floor, hearth wall tiling /stone slab/brick tiling /interlocking tiling/Pre-polished tiles etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises, complete all as specified and directed.

M&L for 10mm thick vitrified parking tiles heavy duty exterior grade texured finished of size 300X300 mm as in stair case, roof tarres, path over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for providing cement concrete, 1:2:4 (nominal mix) type B-1 (using 20mm graded crushed stone aggregate) as edges of interlocking tiles/chequired tiles, roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.

Removel of soft loos soil / sand etc from embankments height not exceeding 1.5 metre from Ground level, complete all as specified and directed.

Removel of soft loose soil / sand etc from embankments height exceeding 1.5 metre but not exceeding 3.00 meter from ground level, complete all as specified and directed.

Loose filling of soft loose soil / sand in Firing range using soil removed vide item No 47 & 48 above including breaking of soil boulder in to small peice, height of filling not exceeding 1.5 metre above the ground level, completed all as specified and diirected.

All as per Ser Item No 49.00 here in above but hight exceeding 1.5 metre but not exceeding 3.0 metre from ground level.

M&L for Loose filling of clean and dry sand in Firing range, height of filling not exceeding 1.5 metre above the ground level, completed all as specified and diirected.

M&L for Loose filling of clean and dry sand in Firing range, height of filling exceeding 1.5 metre but not exceeding 3.00 metre above the ground level, completed all as specified and diirected.

Supply only Fine aggregate (sand)

Supply only 20 to 40 mm Crushed Stone Aggregate

Supply only 40 to 63 mm Crushed Stone Aggregate

Supply only 63 to 90 mm Crushed Stone Aggregate

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismentling/taking down items) worth Rs 77,450.00 during AOC. Note :- Tenderers shall not quote for this Schedule.

M/S GHULAM MOHAMMAD AND CO. (BID ID -3077183)

M/S Abdul Ahad Rather (BID ID -3075573)

M/S JAN BUILDERS (BID ID -3077733)

M/S AIJAZ ENTERPRISES (BID ID -3082261)

M/S FAROOQ AND SONS (BID ID -3083994)

M/S TARIQ AHMAD SHEIKH (BID ID -3078502)

M/S M.R. Construction (BID ID -3080288)

M/S GULZAR ENTERPRISES (BID ID -3075221)

M/S WANI AND SONS (BID ID -3082175)

M/S Thakur & Sons (BID ID -3087322)

M/S HAJI ZAHOOR HUSSAIN GANIE (BID ID -3078111)

M/S GULAM AHMAD ABDUL SAMAD (BID ID -3080347)

M/S LUCKY BUILDERS (BID ID -3083940)