Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.9 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹45.9 L+₹3.4 L (8.11%)Rejected-Finance FLAT NO 203 GH 5 SECTOR 27 PANCHKULA 134116 HRY | PANCHKULA | HARYANA | 134116 | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹47.8 L+₹5.3 L (12.5%)Rejected-Finance 363 39KA HASSANGANJ BAWLI KUMAR COMPANY 363 39 KA HASAN GANJ BAWLI SAADAT GANJ LUCKNOW SAADATGANJ | L3 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹43.8 L
EMD Value
₹87,500
Closing Date
20 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
PROVN OF CERTAIN SANCTIONED REVENUE WORKS AT N AREA, HALLOMAJRA AND SEC 29D UNDER GE CHANDIGARH
2022_MES_563896_1
GE/CHD-68/2022-23
Open Tender
Civil Works
Item Rate
240 days
Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹87,500
Yes
14 Jan 2023
18 Nov 2022
22 Dec 2022
18 Nov 2022
20 Dec 2022
5 Dec 2022
18 Nov 2022 - 28 Nov 2022
Amount
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises for minor repairs to floor in patches all as specified and directed.
Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness of any description and in any position not otherwise specifically provided for all as specified and directed.
Demolition of reinforced cement concrete any thickness all as specified.
Demolition & breaking of AC rain water 100mm dia set in cement mortar & removing from site completed all as specified & directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.
Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, cables etc. n exc 10sq m on plan & getting out in soft/loose soil complete aal as specified
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified.
Removing excavated material distance exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/loose soil complete all as specified.
M&L 75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, complete all as specified.
M&L PCC 1:3:6 type C2 (using 40mm graded aggregate) in fdn, filling, mass concrete, PCC Block for Steel Post etc including necessary form work complete all as specified.
M&L for providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in mass concrete etc., complete all as specified and aa directed.
M&L Reinforced cement concrete, type A-1 (1:1½:3), using 20 mm graded stone aggregates as in lintel supported on walls, beams and columns in floors, chajja, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.
M&L for Brickwork with subclass ‘B’ brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in CM 1:6 complete all as specified and directed.
All as item no. 14 above but except bricks.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified.
S&F of 35mm th 2nd class hard wood, glazed & skeleton shutters, open rebated & prepared to receive glass, (two panel to receive wire gauge) gauge etc, eges of framing plain, chamfered as rounded fitted with cut and mitere beads for securing etc complete all as specified and directed.
S&F Factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, (two panel ) with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
S&F Factory made, 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides if one face is covered with decorative face 1mm thick veneer with lipping/frame to match complete all as specified.
Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.
Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.
Taking down shutters of any description exc 1sqm but not exceeding 2 Sq. m each, including stacking at directed location for refixing and/or removing to store, complete all as specified.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified.
Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.
S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 125 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.
S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.
S&F Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 300 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
S&F Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
S&F Aluminium handles, cast type anodized of size 100 mm, ISI marked, complete all as specified.
M&L Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples / aluminium beading complete all as specified and directed
S&F Drapery rod (conduit) of dia not less than SS 25 mm having a corrugated virgin rings & finials of approved shade with standard SS/ brackets, fixed to walls with rawl plugs and steel screws complete.
Framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified.
M&L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
M&L for mild steel TMT bars10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed. Note for item No 37 & 38 :- Glass / wire gauge shall be measured and paid separately.
S&F steel ventilator (Box type) with top hung shutter including hinges, steel peg towerbolt complete all as specifed and directed.
M& L for Pressed steel frames of profile size 125mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primer including hole fast fixed to wall PCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.
M& L for Pressed steel frames of profile size 105mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including hole fast fixed to wall one shop coat of red oxide primer PCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
S&F Joist, channel, angle, or tee sections, fixed independently by means of welding, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated and provn of grooves for barbed wire fencing) confirming Fe 410-W(Gde-E-250) quality B complete all as specified and directed
Supply only water proofing compound, complete all as specified.
M&L Machine cut Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified.
M&L for first quality, glazed ceramic, straight cut/edge, colored tiles of size 600x300x7mm on vertical surfaces such as dados etc over & including 10 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete, all as specified.
M&L for first quality, glazed ceramic, straight cut/edge, colored tiles of size 450x300x7mm on vertical surfaces such as dados etc over & including 10 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete, all as specified.
M&L First quality, non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floors & skirting etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, all as specified.
M&L First quality, non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, in floors & skirting etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, all as specified.
M&L for coloured vitrified tiles 8 mm to 9 mm thick (square rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36sqm laid as in floors, set and jointed with cement slurry over & including 15mm thick bedding of layer of cement sand mortar (1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors , aprons etc. laid, bedded and pointed in any mortar complete all as specified.
M & L for marble work (Green Marble) 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in cement mortar 1:4. with and including rouding/bull nosing to exposed surfaces of slabs omplete all as specified and as directed.
M&L 25 mm thick Plain cement concrete 1:2:4 Type B0 (12.5mm graded aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.
M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified.
M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified.
M&L Rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified.
M&L Rendering 20-22mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified.
M&L for two coats of cement base paint on new wall surface including chalk whiting, preparation , complete removal of existing treatment all as specified.
M&L for two coats of oil bond distempering on new plaster wall surface including chalk whiting, preparation , complete removal of existing treatment all as specified.
M&L for three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified.
M&L for two coat of synthetic enamel paint over old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.
M&L for two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.
M&L for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.
M&L for two coats of synthetic enamel paint over & including a coat of red oxide primer over old steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.
M&L for two coats of oil bond distempering on old wall surface including chalk whiting, preparation , complete removal of existing treatment complete all as specified.
M&L for two coats of white washing on old ceiling/chajja surfaces including preparation of celing surfaces complete all as specified.
M&L for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified.
M&L for applying two coat of cement base paint on old wall surface for complete removal of existing treatment including preparation of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts cornices etc complete all as specified & as directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint on intergrad (interrior wall/ceiling surface/exterior wall surface) surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified & as directed.
M&L for preparation of newly plastered surface of walls and applying two coats of exterior grade acrylic emulsion paint over a coat of alkali resistant primer complete all as specified.
M&L forTwo coats of white washing on wall surface including chalk whiting, preparation to distempering celing surfaces complete all as specified.
S&F for plain Sheet glass 4 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. mm in each pane complete all as specified.
S&F for Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified.
Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
M&L for providing and fixing Gyp board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx12mm thick as in ceiling having snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all fittings complete all as specified and directed
M&L for dismantling the entire roof covering including brick tiles, mud puska, mud plaster and water proofing treatment any number of layers or thickness etc of any description upto RCC roof slab and cleaning the surface including flashings and junction of parapets, etc with wire brushes cleaning complet removal of surface, including soil (mud phuska) from the site to a distance of MOD land depositing where directed, complete all as specified and as directed.
(a) M&L for appliying bitumenous primer @ 0.30 litre per sqm over cleaned and dry roof surface including parapet. (b) M&L for providing and laying 3mm thick APP modified polymer reinforced water proofing membrane with minimum weight of 3.60kg/sqm as specified. (c) The APP membrane shall be laid using torch application with minimum 10cm side overlap and 15cm end overlap. (d) The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. (e) The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet.
M&L for plain cement concrete 1: 2:4, type B-1 using 20mm graded stone aggregate average thickness 50mm thick plain smooth finish as in roof padding including mixing water proofing compound (dr. fixit) or equivalent make specified in Appx 'B' as per manufacturers instruction complete all as specified.
M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polishedincluding 20mm thick cement mortar in CM 1:4 and jointed grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and all as specified and directed
S&F for tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.
S&F tubes 20 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.
S&F tubes 15 mm bore, ‘medium grade’, galvanized with all fittings (Except pipe) and fixed complete to walls and ceilings or laid in floors, complete all as specified.
S&F tubes 20 mm bore, ‘medium grade’, galvanized with all fittings (Except pipe) and fixed complete to walls and ceilings or laid in floors complete all as specified.
Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.
Dismantling of water tank of capacity exc. 250 & n.exc. 500 ltrs and removing to store complete all as specified.
Dismantling existing tank , removeing to store complete all as specified.
S&F Hoisted and fixed in position, 1000 litre capacity, polyethylene water storage tanks of any shape, including making necessary connections complete all as specified.
S&F Ball valves, high pressure PTMT with epoxy coated polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified.
S&F Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) tank nipple, for water storage tank of size 15-20 mm complete all as specified.
S&F Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 15 mm bore, ISI marked, screwed both ends for iron pipe, in repair, complete all as specified.
S&F Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, in repair, complete all as specified.
S & F for stop valves/angle valve, fancy type, chromium plated 15mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.
S&F Bib taps, fancy type cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down, suitable for 15 mm bore pipe, in repair complete all as specified.
S&F Bib taps, fancy type cast copper alloy with handle, chromium plated fancy type, long body with wall flange screwed down, suitable for 15 mm bore pipe, in repair complete all as specified.
S&F Consealed stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, in repair complete all as specified.
Supply & fix in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.
S&F for Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed suitable for 15 mm bore pipe, in repair complete all as specified.
S&F Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) Iin repair complete all as specified.
S&F PVC waste pipe 800 mm long suitable for 32 mm dia waste coupling, in repair complete all as specified.
S&F Swivel shower fency type of CP with shower arm 15mm size,195 mm long with bend of 45 degree with flange of PTMTany colour for fixing with 15mm pipe (Minimum weight 40 gm) in repair complete all as specified.
M&L for wooden laminated pargo flooring in strips 120cm long and 20 cm wide 6 to 8 mm thick fixed above cushion all as per manufacturers instruction and direction fixed complete all as specified and colour as directed by Engineer -in -Charge.
Dismantling of walls and ceiling boards/wall paneling or insulation board any thickness, including cover fillets complete all as specified and directed
S&F PVC hallow wall panelling of 5 mm including all necessary fitting frame work etc completed all as specified by Engr-in - Charge
S&F in repairs CP brass, wall mixer fancy type non telephonic, fancy type,15 mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S&F PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) in repair complete all as specified.
S&F glass shelf with brass chromium plated screws & PVC rawl plugs in repair complete all as specified.
S&F glass corner shelf any colour with brass chromium plated screws & PVC rawl plugs in repair complete all as specified.
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm in repair complete all as specified.
S&F PVC 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes in repair complete all as specified.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4) of , in repair complete all as specified.
S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) in repair complete all as specified.
S & F vitreous china wash down water closet (pedestal pattern) white with ‘ and including CI P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe etc as in repair complete all as specified and as directed.
S&F single piece WC of size 365x655x765mm with flushing cistern and connection pipe, P or S trap (closed pattern incl all necessary accessories like rag bolts, kitt /gel gasket etc, (including flushing cistern, pvc seat cover , jet and flush pipe complete all as specifed and directed.
S&F single piece WC, kitt complete all as specifed and directed.
M&L for Vitreous china urinal partition white of size 310x700 mm. complete all as specified and directed.
M&L for Vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe complete all as specified and directed.
S&F 10 ltr capacity PVC flushing cistern syphonic action type white dual flush ISI (IS 7231) marked with flush pipe in repair complete with all fixing arrangements complete all as specified and directed.
S&F Vitreous China wash basin with pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, in repair complete all as specified.
M&L for Vitreous china oval shape wash hand basin white size 560x470mm to be fitted in granite shelf /Rcc slab including 32 mm dia CP waste coupling and 60cm waste pipe complete all as specified.
S&F for 110mm dia PVC rain water pipe pressure rating not less than 10 Kg/SQ Cm, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.
S&F for 110mm dia PVC rain water pipe pressure rating not less than 10 Kg/SQ Cm, ISI Marked laid in trenches or in floors complete all as specified and directed.
S&F for 75mm dia PVC rain water pipe pressure rating not less than 10 Kg/SQ Cm, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.
S&F for 75mm dia PVC rain water pipe pressure rating not less than 10 Kg/SQ Cm, ISI Marked laid in trenches or in floors complete all as specified and directed.
Supply and fixing PVC bends plain (any radius) for 75mm bore ISI Mark complete all as specified and directed.
Supply and fixing PVC bends plain (any radius) for 110mm bore ISI Mark complete all as specified and directed.
Supply and fixing PVC bends plain (any radius) for 75mm bore ISI Mark complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Steel tubular section tubular trusses rafter, purline etc of any size and shape including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.
S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, without any attachment Fe410 complete all as specified
S&F 5.5 mm thick sheet glass pane tinted type, with 5 micron thick black film ordinary quality and ruber, cleting, silicone,glazing with oil putty etc in each pane complete all as specified and directed.
M&L for Toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including hinge, handle 2 Nos floor door spring fixing all ccessories, cutting to shape, drilling holes required and ruber, cleting, silicone,glazing with oil putty et complete all as specified and directed.
M&L for plain cement concrete 1: 2:4, type B-1 using 20mm graded stone aggregate average thickness 50mm as in roof carbe chajja etc including mixing water proofing compound (dr. fixit) or equivalent make specified complete all as specified.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4Type B-1 as required exc. Half brick but not exc. 1 brick. complete all as specified.
S&F aluminium powder coated (min thickness of powder coating 50 micron) frame for door , windows, ventilators weight not les than 3 kg/Rm with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified.
S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium door shutters, weight not less thn 2.5 Kg/Rm aluminium section including necessary joining cleats/aluminium beading, glazing clips clips, ruber neoprene packing, handles 2 Nos, tower bolt 2 No in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars,including (double shutter) glazing bars and without glazing bars aluminium sections weighing not less 2.00 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), tower bolt 2 Nos complete all as specified
S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified
S&F Aluminium (Dicast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and complete all as specified and directed.
Supply, Erection, Testing and Commissioning of 15 Mtr high galvanized mast light with 9 Nos lantern 210 watts (flood light ) LED symmetrically fitted and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly operated manually as well as electrically morrised , aviation obstruction light, lightning arrester spike including RCC foundation complete Note: Cost of mast is including pole,flood light fitting,RCC foundation
Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23cm as mentioned in para 19.75 of SSR part-I
Supply & laying reinforced, precast concerete cable cover, class LV, type 1, flat, size 250 mm x 150 mm x 40 mm complete.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 Sq mm 3.5 core all as specified and directed by Engg-In-charge.
Supply and lay GI tubing light grade in trenches for protection of cable for 40 mm dia all as specified and directed by Engg-In-charge.
Supply and fix 4 Pole MCCB 63 Amp 50 Hz 415 V with rupturing capacity 16 KA with suitable sheet enclosure for fixing.
M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to using galvanised iron strip 25×4mm as earthing lead as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 5 of SSR (Part-I) and testing on completion, complete all as specified and directed.
M&L for Point wiring with copper conductor, single core, PVC insulated, unsheathed stranded FRLS cable (IS 694), including PVC insulated copper multi-stranded conductor cable, unsheathed, of size 1.5 sqmm and one single core earth continuity multi-stranded conductor size 1.50 sqmm green in colour to common earth and connecting to earth dolly with copper crimp of suitable size and including PVC non-mettalic rigid conduit with conduit accessories concealed in walls/ Ceiling / floor etc., including MS box 3mm thick with 3mm hylum sheet cover for fixing of switches/sockets/fan regulators etc, complete all as specified for the One light/ceiling fan/exhaust fan/bell point controlled by one switch.
All as per Item No 162 but wiring with 2.5 Sqmm nominal area cable for 15 Amp socket outlet three pin Independent point with1.5 Sqmm copper conductor for earthing (green colour).
S&F ceiling rose surface bakelite 65x50mm three terminals complete all as specified ISI marked, complete all as specified.
Disconnection and removing the u/s light fitting and S&F LED Batten box type made of CRCA sheet including 1X20 watt retro LED tube rods and pre-wired with high efficiency electronic driver and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified.
Supply and replacement of switch piano 5 Amps single pole, AC, 230V flush type ISI marked.
Supply and replacement of socket 3 pin 5 Amps flush type (ISI marked) .
Supply and replacement of switch piano 15 Amps single pole, AC, 230V flush type ISI marked.
Supply and replacement of socket 3 pin 15 Amps flush type (ISI marked) .
Supply and fix Exhaust Fan of size 300 mm sweep with metalik louvers, working on single phase 230V AC supply complete with nut and bolts and all as directed by Engineer-in- charge.
Supply & Fix of factory made sheet metal enclosure for distribution board double door type (Fixed to the wall), single pole and netural with 200 Amp rated bus bar, 8 way suitable for having MCB’s complete all as specified.
S & F MCB, SPN, 240V, 40 Amps, breaking capacity 10 KA Complete all as specified.
S & F MCB, SP, 240Volt, 5 to 32 Amps, breaking capacity 10 KA, LC series Complete all as specified
Supply & fix ceiling fans copper wound complete with and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and directed.
. M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 3 of SSR (Part-I) and testing on completion, complete all as specified and directed.
B N FRIENDS AND CO
KUMAR AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .