Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC 25 A BR SAMY LANE KATTOOR COIMBATORE 641009 | COIMBATORE | COIMBATORE | TAMIL NADU | 641009 | L1 | Accepted-AOC L1 | |
| 2 | L2₹34.1 L+₹2.4 L (7.53%)Rejected-AOC DOOR NO IV 400 NEAR RAMANTHALI GHSS RAMANTHALI PO KANNUR 670308 | KANNUR | KERALA | 670308 | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹36.9 L+₹5.2 L (16.5%)Rejected-AOC | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹37.7 L+₹6.1 L (19.1%)Rejected-AOC | L4 | Rejected-AOC Other than L1 |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
20 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
UPGRADATION OF LT SERVICE CABLES OF MD ACCN OF PERMANENT/ STUDENT OFFRS INCL CONNECTED WORKS AT DSSC WELLINGTON
2022_MES_540416_1
8249/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENT AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹68,000
Yes
26 Aug 2022
23 Jul 2022
23 Aug 2022
23 Jul 2022
20 Aug 2022
6 Aug 2022
Amount
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for taking out/laying of UG Cables, GI pipe etc. and getting out in hard/ dense soil complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thic with excavated soil complete all as specified and as directed.
Removing of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and as directed.
M & L for providing sand cushioning for protection of UG cable in trenches with coarse river sand / riddled earth of approved quality as approved in writing by GE including filling, spreading and punning down to desired thickness complete and all as specified and directed.
Supply and laying sub class "B" bricks in trenches for protection of UG cable with width equal to length of bricks, laid dry & flat complete all as specified and as directed.
Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4.0 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories incl taking down old cable complete all as specified and as directed. Make : HAVELLS/GLOSTER/POLYCAB. Note :- Necessary earthwotk, PCC etc shall be measured & paid separately under relevant items of works
Description all as per Item Sl No 6 here in above but of size 25 Sqmm 4.0 core complete all as specified and as directed.
Description all as per Item Sl No 6 here in above but of size 35 Sqmm 3.5 core complete all as specified and as directed.
Description all as per Item Sl No 6 here in above but of size 50 Sqmm 3.5 core complete all as specified and as directed.
Description all as per Item Sl No 6 here in above but of size 70 Sqmm 3.5 core complete all as specified and as directed.
Description all as per Item Sl No 6 here in above but of size 95 Sqmm 3.5 core complete all as specified and as directed.
Description all as per Item Sl No 6 here in above but of size 240 Sqmm 3.5 core complete all as specified and as directed.
S & F MCB change over switch, 4P, 63A with 3 position (I-O-II) with centre off position, AC-22A with & including fixing of the same inside IP-30 metal enclosure suitable for surface & flush mounting 6 way incl making necessay electric connection complete all as specified and as directed. Make : L & T, Cat No : AUC OO 406300 (for MCB C/O Switch), Cat No : DBEN COO65D (for enclosure) or techno-commercially equivalent in ABB/ Siemens.
M & L for GI pipe light grade with all running fittings (ISI Marked), laid in trenches, under road or fixing on wall/pole/crossing drain/nallah etc. of bore 80 mm complete all as specified and directed. Make : TATA/JINDAL/PRAKASH. Note : Wherever GI Protection pipes are to be placed/fitted above earths surface, cost of necessary clamping/fixing arrangements to the entire satisfaction of Engr-in-Charge is deemed to be included in the unit quoted rates.
Description all as per Item Sl No 14 here in above but of bore 50 mm complete all as specified and as directed.
M & L for earthing complete with Galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron earth strip 32 x 6 mm upto 7.5 Mtr by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with suitable funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed. Note:- On completion of the complete work/job the Contr is to perform earth resistance tests for each earthing job in the presence of the Engr-In-Charge or his rep & submit test certificates duly signed & certified. If the test results are not satisfactory or not within the permissible limits of relevant Standards/IS then the job is to be redone without any extra cost to the Dept till the results are satisfactory.
S & F 32 x 6 mm galvanised iron strip as earth continuity incl connection complete with the help of chromium plated washers nuts etc., complete all as specified and as directed.
M & L for boring under road manually with labour suitable for inserting upto 80 mm bore pipe at a depth 0.75 to 1.00 mtr complete all as specified and as directed.
M & L for cutting the existing hardstanding / PCC / WBM road at a depth of not less than 60 cm & 30 cm in width for passing of UG cables through GI pipes, returning filling in, complete incl finishing the surfaces by providing cement concrete type B-1 (1:2:4) with 20 mm graded aggregate upto 20 cm, finishing to a uniform smooth surface complete all as specified and as directed.
M & L for cutting grass, bushes, creapers, weeds, unwanted plants /growths, area cleaning etc in and arround electric supply installations, LT panels, feeder pillar boxes or any other locations as decided by Engr-in-Charge/GE and removing rubbish off the premises complete all as specified and to the entire satisfaction of the Engr-in-Charge. Note for Item Nos 1, 18,19 & 20 : Any damages made to the existing services of MES /WCB/TNEB/Other Depts like HT/LT UG cables, Water Supply/Sewage Pipe lines, OFC/ BSNL/ITRC /Signal communication cables etc. during the excavation/boring/road cuting etc. progress of the work shall be made good with proper jointing kits etc. as per original to the entire satisfaction of Engr-in-Charge & GE & the cost of the same is deemed to be included in the unit quoted rates. Decision of the Aceepting Officer shall be final & binding.
Supply, install, testing & commissioning of LT control panel board "out-door type" of size 1200 mm (height) x 900 mm (breadth) x 500 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade aluminum bus-bar wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.00 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including complete internal wiring with not less than 2.5 Sqmm copper wire including cable glands of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv LT panel of any size/type complete all as specified & as directed with & including the following accessories :
(Near Eklavya Sports Complex) (i) BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 300 Amps rated, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 160 to 200 A - 01 Nos. Make : L & T, Cat No : CM90642OONO or techno-commercially equivalent of Legrand /Siemens. (b) Onload changeover switch -01 Nos, open-execution modular construction type , confirming to IS/IEC 60947, -3 rated current -200 Amps 415 volts , 4 pole, AC 23 A -01 Make : L & T, Cat No : CO22000OOOOA techno-commercially equivalent of Legrand /Siemens.
Description all as per item 21 here in before but of size 1800 mm (height) x 1500 mm (breadth) x 500 mm (depth) (minimum dimensions) with & including the following accessories:
(Sub Station No 7) (i) BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 800 Amps rated, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 500 to 630 A - 01 Nos. Make : L & T, Cat No : CM94106OOT1OG or techno-commercially equivalent of Legrand /Siemens.
OUTGOINGS : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 320 to 400 Amps - 02 Nos (1W+1S) Nos. Make : L & T, Cat No : CM94105OOR1OG or techno-commercially equivalent of Legrand /Siemens. (b) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating200 to 250Amps - 02 Nos (1W+1S) Nos. Make : L & T, Cat No : CM90642OOPO or techno-commercially equivalent of Legrand /Siemens. (c) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 160 to 200Amps - 01 Nos Make : L & T, Cat No : CM90642OONO or techno-commercially equivalent of Legrand /Siemens. (d) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 80 to 100Amps - 01 Nos Make : L & T, Cat No : CM91712OOKOOG or techno-commercially equivalent of Legrand /Siemens. (e) Time switch 415 Volts, 3 Phase of 20 Amps rating with Contactor complete . Make : L&T, Cat No (AUTS02DIG00- timer, CS94190-contactor) or techno-commercially eqvt of Legrand /Siemens. (f) MCB TPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps - 02 No. (1W + 1S) Make : L&T /Legrand /Siemens.
Supply, install, testing & commissioning of LT control panel board "Indoor type" of size 1500 mm (height) x 1200 mm (breadth) x 500 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-43 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade aluminum bus-bar wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 2.0mm thick CRCA sheet for outer portions & 1.60 mm thick for inner portions duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including complete internal wiring with not less than 2.0 Sqmm copper wire including cable glands of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv LT panel of any size/type complete all as specified & as directed with & including the following accessories :
(Sub Station No 3) (i) BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 700 Amps rated, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity36 KA & of rating 500 to 630 A - 01 Nos. Make : L & T, Cat No : CM94106OOT1OG or techno-commercially equivalent of Legrand /Siemens.
OUTGOINGS : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 200 to 250Amps - 03 Nos (2W+1S) Nos. Make : L & T, Cat No : CM90642OOPO or techno-commercially equivalent of Legrand /Siemens. (b) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 125 to 160Amps - 03 Nos (2W+1S) Make : L & T, Cat No : CM90642OOMO or techno-commercially equivalent of Legrand /Siemens. (c) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 50 to 63Amps - 04 Nos (3W+1S) Make : L & T, Cat No : CM91712OOHOOG or techno-commercially equivalent of Legrand /Siemens. (d) Time switch 415 Volts, 3 Phase of 20 Amps rating with Contactor complete . Make : L&T, Cat No (AUTS02DIG00- timer, CS94190-contactor) or techno-commercially eqvt of Legrand /Siemens. (e) MCB TPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps - 02 No. (1W + 1S) Make : L&T /Legrand /Siemens.
Description all as per item 21 here in before but of size 1200 mm (height) x 900 mm (breadth) x 500 mm (depth) (minimum dimensions) with & including the following accessories: (Near Reservoir block 1 to 4) (i) BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 200 Amps rated, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes.
INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 100 to125 A - 01 Nos. Make : L & T, Cat No : CM90642OOLO or techno-commercially equivalent of Legrand /Siemens. (b) Onload changeover switch -01 Nos, open-execution modular construction type , confirming to IS/IEC 60947, -3 rated current -200 Amps 415 volts , 4 pole, AC 23 A -01 Make : L & T, Cat No : CO22000OOOOA techno-commercially equivalent of Legrand /Siemens. OUTGOINGS : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 80 to100 Amps - 02 Nos (1W+1S) Nos. Make : L & T, Cat No : CM91712OOKOOG or techno-commercially equivalent of Legrand /Siemens. (b) Time switch 415 Volts, 3 Phase of 20 Amps rating with Contactor complete . Make : L&T, Cat No (AUTS02DIG00- timer, CS94190-contactor) or techno-commercially eqvt of Legrand /Siemens. (c) MCB TPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps - 03 No. (2W + 1S) Make : L&T /Legrand /Siemens.
Description all as per item 21 here in before but of size 1200 mm (height) x 900 mm (breadth) x 500 mm (depth) (minimum dimensions) with & including the following accessories: (Near Offrs Mess for Galenco, West Grove & Handley Cross Bunglow including Servant Qtrs) (i) BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 200 Amps rated, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes.
INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 80 to 100 A - 01 Nos. Make : L & T, Cat No : CM91712OOJOOG or techno-commercially equivalent of Legrand /Siemens. (b) Onload changeover switch -01 Nos, open-execution modular construction type , confirming to IS/IEC 60947, -3 rated current -200 Amps 415 volts , 4 pole, AC 23 A -01 Make : L & T, Cat No : CO22000OOOOA techno-commercially equivalent of Legrand /Siemens. OUTGOINGS : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 63 to 80 Amps - 04 Nos (3W+1S) Nos. Make : L & T, Cat No : CM91712OOJOOG or techno-commercially equivalent of Legrand /Siemens. (b) MCB SPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps - 01 No. Make : L&T /Legrand /Siemens.. (c) MCB TPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps - 01 No.Make : L&T /Legrand /Siemens.
Supply, install, testing & commissioning of LT control panel board "Indoor type" of size 1800 mm (height) x 1500 mm (breadth) x 500 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-43 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade aluminum bus-bar wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 2.0mm thick (for outer portions) & 1.60 mm thick for inner portions duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including complete internal wiring with not less than 2.0 Sqmm copper wire including cable glands of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv LT panel of any size/type complete all as specified & as directed with & including the following accessories :
(Main Filter House) (i) BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 300Amps rated, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 160 to 200 A - 01 Nos. Make : L & T, Cat No : CM90642OONO or techno-commercially equivalent of Legrand /Siemens. (b) Onload changeover switch -01 Nos, open-execution modular construction type , confirming to IS/IEC 60947, -3 rated current -200 Amps 415 volts , 4 pole, AC 23 A -01 Make : L & T, Cat No : CO22000OOOOA techno-commercially equivalent of Legrand /Siemens.
Sreekrupa Enterprises
Manoprabha Electricals
Saket Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .