REPAIRS AND PAINTING TO STEEL FURNITURE AT NAVAL BASE UNDER GE(SB) KARWAR.

Amount

TABLE OFFICE CLERK STEEL (FD-381, FD-1004, FD-84M)

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick prelaminated partical board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thick duly french polished after preparation of surface shall be provided all around the top all as directed .

(b) M & L for removing unsv lock of table by S & F new lock with duplicate key (As per sample and as directed by Engr-in-Charge) all as shown on drawing.

(c) M & L for removing unsv rubber shoes from leg and S & F new rubber shoe of superior quality as per sample approved.

(d) M & L for removing the unsv PVC recessed handle from drawer by S & F new PVC recessed handle of trade pattern of superior quality as per sample approved.

(e) M & L for removing the leg where found broken shall be provided by S & F new leg made out of MS square pipe of size 25 sqmm and 1.6mm wall thickness as per drawing duly welded as directed by Engr-in-Charge.

(f) M & L for preparation surface of table and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed Make : (As per particular specification) internally and externally complete incl applying putty where required.

Table Office Clerk Steel (MEC-381)

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick prelaminated partical board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thick duly french polished after preparation of surface shall be provided all around the top all as directed .

(b) M & L for removing unsv lock of table by S & F new lock with duplicate key for table of all as shown on drawing. (As per sample and as directed by Engr-in-Charge)

(c) M & L for removing unsv rubber shoes from leg and S & F new rubber shoes of superior quality as per sample approved.

(d) M & L for removing the unsv PVC recessed handle from drawer by S & F new PVC recessed handle of trade pattern of superior quality as per sample approved.

(e) M & L for removing the leg where found broken shall be provided by S & F new leg made out of MS square pipe of size 25 sqmm and 1.6mm wall thickness as required duly welded as directed by Engr-in-Charge.

(f) M & L for preparation surface of table and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray OR as directed (Make as per particular specification) internally and externally complete incl applying putty where required.

Table Office Officer Steel (MEC-2994, FD-1003)

(a) M & L for removing unsv top of table by S & F new table top in one piece made out of 18/19mm thick prelaminated partical board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thick duly french polished after preparation of surface shall be provided all around the top all as directed .

(b) M & L for removing unsv lock of table by S & F new lock with duplicate key for table of make as per particular specification all as shown on drawing.

(c) M & L for removing unsv rubber shoes from leg and S & F new rubber shoes of superior quality as per sample approved.

(d) M & L for removing the unsv PVC recessed handle from drawer by S & F new PVC recessed handle of trade pattern of superior quality as per sample approved.

(e) M & L for preparation surface of table and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete incl applying putty where required.

Charpoy GI pipe (FD-220)

(a) M & L for removing unserviceable long rail of charpoy by S & F new 32mm GI pipe long rail of Make as per particular specification confirming to IS duly threaded at both end as required and fixing including tightening the frame work all as shown on drawing.

(b) M & L for removing unserviceable check nut of charpoy S & F new 32mm GI check nut of Make as per particular specification confirming to IS incl tightening the frame work all as shown on drawing and as directed.

(c) M & L for removing unserviceable GI elbow of charpoy by S & F new 32mm GI elbow of Make as per particular specification confirming to IS incl tightening the frame work all as shown on drawing and as directed.

(d) M & L for cutting of short rail retrieved from long rails and threading at both ends as required and fixing the same all as shown on drawing and as directed.

(e) M & L for cutting of legs retrieved from short rail and threading at one end as required and another side new 3mm thick MS sheet base plate welded at bottom all as shown on drg.

(f) M & L for removing unsv plywood and S & F plywood commercial 12mm thick BWP grade ISI marked of Make as per particular specification of size 2100 x 900mm all as directed by Engr-in-Charge.

Book Case Steel (MEC 1028, MEC 180)

(a) M & L for removing unsv glass from shutter by S & F new 3mm thick glass pane of size 310mm x 810mm of Make as per particular specification with rubber beading of superior quality all around the glass all as directed and as shown on drawing.

(b) M & L for removing unsv CP handle from shutter and S & F new 100mm CP handle with nut of superior quality of trade pattern as per sample approved.

(c) M & L for removing unsv lock of book case by S & F new lock with duplicate key (set of four) of Make : (As per particular specification) all as shown on drawing.

(d) M & L for removing unsv MS channel/guide rail by S & F new MS channel/guide rail complete including all accessories all as per drawing.

(e) M & L for making shutter assembly serviceable to function smoothly all as directed by Engr-in-Charge.

(f) M & L for preparation surface of Book Case Steel and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete incl applying putty where required.

Almirah steel storewell large (MEC 2936)

(a) M & L for removing unsv lock of almirah by S & F new lock with duplicate key of Make as per particular specification all as shown on drawing.

(b) M & L for removing unserviceable 3 way locking sys of almirah by S & F new 3 way locking system complete all as shown on drawing and as directed.

(c) M & L for removing unsv CP handle from door shutter by S & F new 125mm CP handle with nut and bolts as per sample approved

(d) M & L for removing unsv hinges by S & F new 75mm hinges of superior quality of make as per sample approved.

(e) M & L for removing unserviceable leg of almirah by S & F new leg made out of MS sheet 1mm thick and fix to its existing position all as shown on drawing and as directed.

(f) M & L for repair of door system and shelves of almirah to make it functional smoothly all as directed by Engr-in-Charge.

(g) M & L for removing unserviceable CP hanging rod of almirah by S & F new CP hanging rod of dia 25mm of superior quality as per sample approved.

(h) M & L for preparation surface of Almirah Steel large and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete incl applying putty where required.

Almirah steel large (MEC-351)

(a) M & L for removing unsv lock of almirah by S & F new lock with duplicate key of Make : (As per particular specification) all as shown on drawing.

(b) M & L for removing unsv CP handle from door shutter by S & F new 125mm CP handle with nut and bolts of Make as per particular specification

(c) M & L for removing unserviceable leg of almirah by S & F new leg made out of MS sheet 1mm thick and fix to its existing position all as shown on drawing and as directed.

(d) M & L for removing unsv hinges by S & F new 75mm hinges of superior quality as per sample approved.

(e) M & L for repair of door system and shelves of almirah to make it functional smoothly all as directed by Engr-in-Charge.

(f) M & L for removing unserviceable 3 way locking sys of almirah by S & F new 3 way locking system all as shown on drawing and as directed.

(g) M & L for preparation surface of Almirah Steel large and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete incl applying putty where required.

Almirah Med steel (FD-1032)

(a) M & L for removing unsv lock of almirah by S & F new lock with duplicate key for of Make as per particular specification and all as shown on drawing.

(b) M & L for removing unsv CP handle from door shutter by S & F new 125mm CP handle with nut and bolts conforming to IS of Make as per particular specification

(c) M & L for removing unsv hinges by S & F new 75mm hinges of superior quality of trade pattern as per sample approved.

(d) M & L for removing unserviceable leg of almirah by S & F new leg made out of MS sheet 1mm thick and fix to its existing position all as shown on drawing and as directed.

(e) M & L for repair of door system and shelves of almirah to make it functional smoothly all as directed by Engr-in-Charge.

(f) M & L for removing unserviceable 3 way locking sys of almirah and S & F new 3 way locking sys all as shown on drawing.

(g) M & L for preparation surface of Almirah Steel Medium and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete incl applying putty where required.

Almirah Med steel (MEC-2938, MEC-350)

(a) M & L for removing unsv lock of almirah by S & F new lock with duplicate key of Make : (As per particular specification) all as shown on drawing.

(b) M & L for removing unsv CP handle from door shutter by S & F new 125mm CP handle with nut and bolts of Make as per particular specification and all as shown on drawing.

(c) M & L for removing unsv hinges by S & F new 75mm hinges of superior quality of make as per sample approved.

(d) M & L for removing unserviceable leg of almirah by S & F new leg made out of MS sheet 1mm thick and fix to its existing position all as shown on drawing and as directed.

(e) M & L for repair of door system and shelves of almirah to make it functional smoothly all as directed by Engr-in-Charge.

(f) M & L for removing unserviceable 3 way locking sys of almirah and S & F new 3 way locking sys all as shown on drawing .

(g) M & L for preparation surface of Almirah Steel Medium and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (make as per particular specification) internally and externally complete incl applying putty where required.

Charpoy IP hard top (FD/MAP-II/01)

(a) M & L for removing unsv plywood top of charpoy by S & F top made of plywood commercial 12mm thick confirming to IS BWP grade in one piece of (Make : As per particular specification) all as shown on drawing.

(b) M & L for removing unsv rubber shoes from leg of charpoy by S & F new rubber shoe of superior quality as per sample approved.

(c) M & L for preparation of surface of charpoy and paint one coat synthetic enamel paint 1st grade of colour Black or as directed (Make as per particular specification) to complete steel surface incl applying putty where required.

Bed Hard (FD/E6/MAP/08 (R))

(a) M & L for removing unsv plywood top of bed hard and S & F plywood commercial 12mm thick BWP grade ISI marked of Make (As per particular specification) to bed hard all as per shown on drawing and as directed by Engr in Charge

(b) M & L for removing unsv prelaminated particle board from head board by S & F new 18/19mm thick prelaminated Partical board exterior grade confirming to IS of Make as per particular specification to bed hard all as per shown on drawing.

(c) M & L for removing unsv prelaminated particle board from foot board by S & F new 18/19mm thick prelaminated MDF board exterior grade confirming to IS of Make as per particular specification to bed hard all as per shown on drawing.

(d) M & L for removing unsv rubber shoes from leg by S & F new rubber shoe of superior quality as per sample approved.

(e) M & L for preparation of surface of Bed Hard and paint one coat synthetic enamel paint 1st grade of colour Black or as directed (Make as per particular specification) to complete steel surface incl applying putty where required.

Teapoy Varandah (FD/E6/MAP/17)

(a) M & L for removing unsv top of teapoy by S & F new top made out of prelaminated particle board 18/19mm thick exterior grade confirming to IS of Make as per particular specification all as per shown on drawing.

(b) M & L for removing unsv rubber shoes from leg by S & F new rubber shoe of superior quality as per sample approved.

(c) M & L for preparation surface of teapoy and paint one coat synthetic enamel paint 1st grade of colour Black or as directed Make as per particular specification to complete steel surface incl applying putty where required.

Charpoy IP folding (FD-388(R))

(a) M & L for removing unsv plywood top of charpoy IP folding and S & F new 9mm thick ply wood top ISI marked of BWP grade of Make as per particular specification to charpoy IP folding all as per shown on drawing.

(b) M & L for preparation surface of charpoy and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/White/Black/OG or as directed and Make as per particular specification to complete steel surface incl applying putty where required.

Rack shoe steel (FD/MAP-II/02(R))

(a) M & L for preparation of surface of rack shoe and paint one coat synthetic enamel paint 1st grade of colour Black or as directed (Make as per particular specification) to complete steel surface incl applying putty where required.

Rack shoe steel (C3/MEC/SP/182/MO/17)

(a) M & L for removing unserviceable top of rack shoe steel by S & F new top made out of 18/19mm thick Ply board with 1.5mm thick Laminate Teak Veneer finish Make : (As per particular specification) including teak wood edging duly french polished after preparation of surface shall be provided all around the top all as directed and as per drawing.

(b) M & L for removing unserviceable drawer of rack shoe steel by S & F new 12 mm thick BWP grade commercial plywood of Make : (As per particular specification) duly laminated with decorative laminate of 1.5mm thick of Make as per particular specification in front side of drawer all as specified and as per drawing.

(c) M & L for removing unsv knob from drawer by S & F new Knob of superior quality as per sample approved.

(d) M & L for preparation surface of rack shoe and paint one coat synthetic enamel paint 1st grade of colour Black/OR as directed (Make as per particular specification) to complete steel surface incl applying putty where required.

Cabinet filling steel (MEC-2933)

(a) M & L for removing unsv lock of cabinet filing by S & F new lock with duplicate key of Make as per particular specification all as shown on drawing.

(b) M & L for making drawer system serviceable to functional smoothly all as directed by Engr-in-Charge.

(c) M & L for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed ( Make as per particular specification) to complete steel surface incl applying putty where required.

Stool steel 305x305x510mm / 760mm (FD 81M, MEC 2940)

(a) M & L for preparation of surface and paint with one coat synthetic enamel 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface incl applying putty where required.

Table dinning 4 person steel (MEC-2946)

(a) M & L for removing unsv top of table by S & F new table top in piece made out of 25mm thick prelaminated Particle board exterior grade confirming to IS of Make as per particular specification including PVC lipping for beading after preparation of surface shall be provided all around the top all as directed and as shown on drawing

(b) M & L for removing old unsv rubber shoes from leg of table dinning steel by S & F new rubber shoes of superior quality as per approved sample.

(c) M & L for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface incl applying putty where required.

Side rack with tray steel (FD 1023, MEC 1023)

(a) M&L for Painting of one coat of smoke gray/White/brown/Silver Gray or as directed synthetic enamel paint (Make as per particular specification) to side rack with tray steel incl applying putty for depressed surface before painting all as specified and shown on drgs and directed by Engineer-in-Charge.

Rack steel 5 tier (MEC 382R1A)

(a) M & L for preparation of surface and paint one coat synthetic enamel paint 1st grade of colour smoke gray/White/brown/Silver Gray (Make as per particular specification) to complete steel surface incl applying putty where required.

(b) M & L for removing unsv nut and bolts S & F new nut and bolts of superior quality to fixing the shelves system all as shown on drawing.

Rack steel 6 tier (MEC 382R1E)

(a) M & L for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface incl applying putty where required.

(b) M & L for removing unsv nut and bolts S & F new nut and bolts of superior quality to fixing the shelves system all as shown on drawing.

Rack steel 3 tier (MEC 382R1D)

(a) M & L for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface incl applying putty where required.

(b) M & L for removing unsv nut and bolts S & F new nut and bolts of superior quality to fixing the shelves system all as shown on drawing.

Table 90 x 60 x 75 cm with drawer (MEC 1008)

(a) M & L for removing old unsv top of table 90 x 60 x 75 cm S & F new table top made out of 18/19mm thick prelaminated partical board of Make as per particular specification and PVC edging/beading of superior quality all around the top of table all as per drg.

(b) M & L for making drawer system serviceable to function smoothly all as directed by Engr-in-Charge.

(c) M & L for removing unsv rubber shoes from leg and S & F new rubber shoe of superior quality as per sample approved.

(d) M & L for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface incl applying putty where required.

Locker steel (PL13-A4-D21836)

(a) M & L for removing unsv lock of Locker Steel by S & F new lock with duplicate key for table of Make as per particular specification all as shown on drawing.

(b) M & L for removing the unsv PVC recessed handle from shutter by S & F new PVC recessed handle of trade pattern of superior quality as per sample approved.

(c) M & L for preparation surface of locker and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete incl applying putty where required.

Locker steel (MEC/FD/1029, FD -1029)

(a) M & L for removing unsv lock of al by S & F new lock with duplicate key of Make as per particular specification all as shown on drawing.

(b) M & L for removing unsv CP handle from door shutter by S & F new 125mm CP handle with nut and bolts of Make as per particular specification and all as shown on drawing.

(c) M & L for removing unsv hinges by S & F new 75mm hinges of superior quality as per sample approved.

(d) M & L for removing unserviceable leg of locker by S & F new leg made out of MS sheet 1mm thick and fix to its existing position all as shown on drawing and as directed.

(e) M & L for repair of door system and shelves of locker to make it functional smoothly all as directed by Engr-in-Charge.

(f) M & L for preparation of surface of locker and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete incl applying putty where required.

Table Computer (FD/E6/MAP/03)

(a) M&L for removing unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with PVC lipping all around as directed and as shown in drg.

(b) M&L for removing unserviceable key board tray and S & F new key board tray made out of 18/19 mm prelaminated Particle board exterior grade on telescopic channel of shape and size with PVC lipping all around as directed and as shown in drg.

(c) M&L for removing unserviceable bottom shelf and S & F new bottom shelf in full made out of 18/19 mm prelaminated Particle board exterior grade with PVC lipping all around as directed and as shown in drg.

(d) M&L for Removing old UNSV telescopic channel and S&F of new telescopic channel of approved make as directed by Engr-in-Charge and all as per drawing including fixing of keyboard tray/drawers in place.

(e) M&L for removing unserviceable drawer and S & F new drawer made out of 18/19 mm prelaminated Particle board exterior grade on telescopic channel of shape and size with PVC lipping as directed and a knob as shown in drg.

Table Bedside (FD/E6/MAP/15(R))

(a) M&L for removing unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around and all as shown in drg.

(b) M&L for removing unserviceable top drawer and S & F new top drawer made out of 18mm prelaminated partcle board for the front face and 12mm plywood BWP grade on sides ,bottom and back and PVC lipping all around as directed including fixing of the drawers in place and rest all as shown in drg.

(c) M&L for removing unserviceable bottom drawer and S & F new bottom drawer made out of 18mm prelaminated partcle board for the front face and 12mm plywood BWP grade on sides,bottom and back and PVC lipping all around as directed including fixing of the drawers in place and rest all as shown in drg.

(d) M&L for Removing old UNSV telescopic channel and S&F of new telescopic channel of length 1 ft of approved make as directed by Engr-in-Charge and all as per drawing including fixing of drawers in place.

(e) M & L for preparation of surface of table bedside and paint one coat synthetic enamel paint 1st grade of colour Black or as directed (Make as per particular specification) complete as directed.

M & L for electric welding point upto exec 10mm to 25mm to the broken joints of steel furniture (table, locker, almirah, book case, bed, chair etc) wherever required all as directed by Engr-in-Charge

Mahesh Traders

Yash enterprises

SAIRAM INDUSTRIES

OM SAI ELECTRICALS AND HARDWARES

Rao Sales and service