NIT NO. 03(M-3)ITEM NO.35

Repairing of Starter panels and strengthening of main electricity source at i) Bankner T/Well no.- 1 ii) Bankner T/Well no.- 4 (New) iii) Bankner T/Well no.- 4 (Old) iv) Bankner T/Well no.- 7 by carried out following works Dismantling of old and damaged MCCB, MCCBs, relay, Meters, contactors, kit Kat etc. from the panel from the site after disconnecting their connections from the incoming and outgoing to the pump and also dismantle of cubical panel from the wall after removing fastener with the help of manual labour to carry out the work .

Providing and fixing following rating and breaking capacity and pole CCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A, 30 KA ,FP MCCB DSR 2018 2.2.13 Make – L&T/C&S/Schneider/approved make in DJB.

Fabrication/fixing of wall mounted cubical panel board for above mentioned MCCB-100A at sr. no. 1. The job also includes the cost of fasteners required for fixing on wall.

Supply of 4 core 25 sq. mm. armoured Aluminum conductor PVC insulated and PVC sheathed / XLPE Cable 1.1 KV confirming to IS 1554/1`/88 with latest amendment. Make – Gloster/Grandlay/Havells/Finolex/ approved make in DJB.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface eas required.Upto 35 sq. mm (clamped with 1mm thick saddle)DSR 2018 7.7.1

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. 4X25 sq. mm (28mm) DSR 2018 9.1.34

Supply of MCCB triple pole of rating 63 Ampere, breaking capacity 25 kA or more Make:-L&T/BCH/Havells/C&S/HPL/Approved by DJB

Supply of power contactor, triple pole of rating 25 Ampere 415V AC Make:-L&T/BCH/Schneider

Supply of ADD on Blocks 1NO + 1NC for above contactors Make:-L&T/BCH/Schneider

Supply of 6 Amp single pole MCB Make:-L&T/BCH/Schneider/hager/legrand

Supply of supply monitoring type includes Single Phasing Preventer (SPP) Fail Safe Type having time ON Delay 2 sec and OFF Delay 7 sec Make: L&T/Schneider/BCH/approved make by DJB

Supply of Timer for star Delta 415V Make:-L&T/BCH/Schneider

Supply of C curves 32 Amp Four Pole MCB. Make :-Havells / Siemens/ L&T/ Legrand / Hager/ Newton/C&S/BCH.

Supply of rotary switch for local/remote /auto-manual switch for panel .Make :- Havells / Siemens/ L&T/ C&S/BCH.

Supply of 40 Amp, 100 mA sensitivity 4 pole rating RCCB Make :- Havells / Siemens/ L&T/ Legrand / Hager/ Newton

Supply of Indicating Light LED type for panel Make:-L&T/BCH/Schneider

24 Hour analog/digital timer. Make:-L&T/GI/BCH/Schneider/C&S.

Supply of Push buttons Make:-L&T/BCH/Schneider/C&S.

Supply of Over load relay suitable for 7.5 HP/10 HP motor/pump Make:-L&T/BCH/Schneider

Supply of rotary switch for phase changeover for 32 Ampere .Make :- Havells / Siemens/ L&T/ C&S/BCH.

Supply of voltage monitoring relay series having operation of Phase Loss + Phase Sequence + Under Voltage + Over Voltage monitoring Make: L&T/ Havells /HPL/ any approved by DJB

Supply of Digital Ammeter for Three Phase supply Size 96X96 mm Make: - Trinity, Sigma, Conzerv, AE, L&T, Legrand or any approved by DJB

Supply of Digital Volt meter for Three Phase supply Size 96X96 mm Make: - Trinity, Sigma, Conzerv, AE, L&T, Legrand or any approved by DJB

Fixing of starter panel with help of fasteners/nut bolts etc. and Making incoming connections to the starter panel by the existing or by new copper cable as per site requirement including making end terminations etc. as per site requirement

Painting the complete panel in all respect with one coat of red oxide primer and two coats of anti corrosive powder coating/ paint including arrangement of standby panel if required at site as per direction of site in-charge during execution of work.

Installation and testing of new MCB, MCCB, relay, RCCB & digital ammeter & voltmeter etc. with the help of mechanical tool &tackles, making end terminations with the help of thimbles as per site requirement , copper flexible wire etc. This job also includes of manual man power, loading & unloading of men & material at site.

B.S.Enterprises

GURUDEV ENGINEERS