138WE/L-27/24-25

Amount

Excavation in post holes (or similar holes) each not exceeding 0.5 cum in hard/dense soil getting out, returning filling and ramming earth or broken rubbles mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to distance not exceeding 50 metre and making good surface complete all as specified and directed.

M&L for cement Concrete type D-2, 1:4:8 (40 mm graded crushed stone aggregate) as in foundation,filling and mass concrete complete all as specified and directed.

M&L for cement Concrete type C-2, 1:3:6 (40 mm graded crushed stone aggregate) as in walls or retaining walls, any thickness, size or shape including pillasters, buttresses columns, pillars bounddary pillars and post complete all as specified and directed.

Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed

Mil dtseel work as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directe by the Engr-in-Charge

M&L for preparing of new steel surfaces of any description over 10 cm width and girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and as directed .

Surface dressing n.exc 15 cm deep in soft /loose soil complete all as specified and directed.

M&L Hardcore of guage n. exc 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface in broken stone or boulders complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 using 40mm graded crushed stone aggregates as sub base to floor, complete all as specified and directed.

M&L for Sand filling as cushioning under floors including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast conctete coloured interlocking paver block any shape and size fixed with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.

M/S RIGDOL CONSTRUCTION (BID ID -3122472)

PARIDHI CONSTRUCTION (BID ID -3131743)

singh traders (BID ID -3120940)