Karnataka

AOC

Works

Buildings

PROVIDING RAINWATER HARVESTING SYSTEM IN THE PREMISES OF CHIKKAMAGALURU INSTITUTE OF MEDICAL SCIENCE, CHIKKAMAGALURU.

Engineering Wing of Health and Family Welfare Department

EWHFWD Chief Engineer Office Bengaluru | Bengaluru, Karnataka

Amount: Refer DocsCloses: 3 Jun 2026Closed

Bids

1 Bid3 Jun 2026

#	Company	Amount	Status
1	₹2.9 Craccepted-aoc	₹2.9 Cr	accepted-aoc

Tender Value

Refer Docs

EMD Value

₹4.3 L

Closing Date

3 Jun 2026, 9:30 pmClosed

Tender Inviting Organisation

Name

Engineering Wing of Health and Family Welfare Department

Work Description

PROVIDING RAINWATER HARVESTING SYSTEM IN THE PREMISES OF CHIKKAMAGALURU INSTITUTE OF MEDICAL SCIENCE, CHIKKAMAGALURU.

Tender Information

Tender ID

301234

Reference Number

EWHFWD/2026-27/BD/WORK_INDENT2030/CALL-2

Tender Type

Open

Product Category

Buildings

Location

EWHFWD Chief Engineer Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate profit & loss Certified balance sheet with UDIN Number issued by Chartered Accountant

RequiredClass I KPWD Registered Registration Certificate issued by Competant Authority

RequiredWork done certificate issued by not below the rank of Executive Engineer.

RequiredTenderer should have latest GST Registration PAN Card and latest 3 GST clearance certificate in their name

RequiredTenderer should have ESI & PF Certificates his/firm name and PF paid receipt of last month.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders should upload ESI and PF certificate

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

Conditional tenders will not be accepted.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time.

Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected.

Earnest Money Deposit will have to be in any one of the forms as per the instructions in the bid document and shall have to be valid for 45 days beyond the validity of the tender.

All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose

Tenderers are required to read the Bid Documents carefully before submission of their bid

If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution.

If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM (Monday to Saturday) Ph No:91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time.

The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation.

Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work.

Tenderer should have latest GST Registration and latest clearance certificate in their name

The Rates quoted by the tenderer shall be exclusive of GST.

Special Instructions to tenderers - as per bid document.

The Defects Liability Period is 1 year from the date of completion of the work.

Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26.

The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive.

Technical Criteria

General

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2021-22 to 2025-26) The tenderer should have been Satisfactorily completed at least one Similar work of value not less than Rs.145.00 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ SemiGovernment/Government undertaking/autonomous bodies of Government will be considered for the clause 3.2(b).

Others -- Work done certificate issued by the officer not lessthan the rank of Executive Engineer

Clause ITT 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2021-22 to 2025-26). Executed in any one year, the following minimum quantities of work Sl.No Description of key items of works Quantity 1)Earthwork Excavation-2394 Cum,2)Providing and installation of high polymer polyethylene of RWH Pipes-426 mtr, 3)Supply and installation of heavy duty precast concrete segmented Rings (1500mm dia, 200mm hight and 90mm thick)-215 Nos, 4)Supply and installation of 7 inch Heavy duty metallic header unit with 7 inch delivery outlet and 8 inch S-type metallic bend-1 No, 5)Providing and fixing Rain catcher filter model-4 Nos, 6)Providing and installation of 200 m3 or Hour V-Wire technique sand and Activated carbon filter-1 No, 7)Providing and fixing of 8 inch heavy-duty metallic header unit-1 No.Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/Semi Government/Government undertaking/autonomo us bodies of Government will be considered for the clause 3.2(c)

Others -- Work done certificate issued by the officer not lessthan the rank of Executive Engineer

Capabilities of Vendor

List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No of Persons 1. Site Engineer (Civil)- B.E. Civil with minimum experience of 7 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years- 1(One). Note: 1)The tenderer shall submit list and photo identity proof such as Aadhar Card/Voter ID/Employee ID/Pass port/Driving License etc., for the key personnel such as project manager/site engineer to be deployed at each of the work site. 2) The key personnel deployed at the site for this work should be working for a minimum period of one year with the tenderers and experience certificate has to be furnished in this regard

Others -- Educational and Experience certificates to be furnished

Clause ITT 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5-B Where A maximum value of civil engineering works executed in any one year during the last five years 2021-2022 to 2025-26 updated to 2026-27 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2025-26 price level of existing commitments and ongoing works to be completed during the next 6 months. Note. The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned bythe Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Ongoing commitments and Bids submitted for the works certificate issued by the officer not lessthan the rank of Executive Engineer

Class I (KPWD Registered)

Others -- Registration Certificate issued by Chief Engineer, KPWD

Clause ITT 3.3 (a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease/hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Sl. No. Description of Equipment Quantity 1.Tipper-2 Nos, 2.Hydraulic Excavator-1 No & 3. Drilling Rig -2 Nos

Others -- Tax Invoice/Agreements from the supplier

Financial Status

Clause ITT 3.2(a): To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2021-22 to 2025-26) The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.580.00 Lakhs. Note: a) For Clause ITT 3.2 (a) Annual turnover, balance sheet certificate with UDIN Number is to be Uploaded duly certified by the charted accountant is to be submitted.

Others -- Annual Turn over and balance sheet, Proft and loss Certified balance sheet audited CA Certificate by Chartered Accountant

Clause ITT 3.3(b) Liquid assets and /or availability of credit facilities of not less than Rs.126.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor.

Others -- Certificate issued by a Scheduled/Nationalised Bank

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹4.3 L

Important Dates

Last Activity

3 Jun 2026

Published

27 May 2026

Bid Opening

4 Jun 2026

Download Ends

30 May 2026

Pre-Bid Meeting

1 Jun 2026

BOQ Preview

•

PROVIDING RAINWATER HARVESTING SYSTEM IN THE PREMISES OF CHIKKAMAGALURU INSTITUTE OF MEDICAL SCIENCE, CHIKKAMAGALURU. (Civil Works)

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

OTHER ITEMS - (CC Pavement, PMGSY Boards & Innovative Technology) - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base,...

•

Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat o...

•

Cutting Cement Concrete Road surface by Machine cutting to demarcate the trench width of the surface. ---- etc., complete with all lead

•

Cutting Macadam Road surface by Machine cutting to demarcate the trench width of the surface. ---- etc., complete with all lead

•

Cleaning of borewells including yield testing of borewell either using slow or fast rigs for not more than 2 hours at the final depth with a minimum working of 2 hours continuously with air compressor...

•

Providing and Placing 12 mm aggregate around the periphery of perforated pipe, after placement of perforated up to decide depth as per site condition. Complete as per the directions of the engineer/se...

•

Providing and Placing 40 mm aggregate around the periphery of rings of silt trap and Injection well, after placement of rings up to decide depth as per site condition. Complete as per the directions o...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and fixing to HDPE slotted pipes "V" wire screen for injection well of diameter 163 MM V Wire screen material SS 304 Screen, width of the profile V wire 2.57 MM x Profile wire Height 2.24 MM...

•

Providing and fixing of 160 mm x 140 mm customized HDPE reducing connecting Bush with self-screw. Manufactured using heavy duty HDPE pipe grade material, required to connect V-wire screen with HDPE PI...

•

Supply, fixing, and installation of 203 mm dia horizontal V- wire screen for silt trap made up of low carbonized steel cage treated with grit blasting, spray galvanizing with zinc metal coating. Zinc ...

•

Filteration media for Providing and laying 20 MM & 40 MM crushed stone aggregates, activated carbon, Charcoal, gravel sand all put together in 0.45 mtr height in 1350 mm inner dia injection well, co...

•

Filteration media for Silt trap: Providing and laying 20 MM & 40 MM crushed stone aggregates, activated carbon, Charcoal. All put together in 0.325 m in 1350mm inner dia silt trap complete with all ne...

•

Sinking of borewell of 215 mm dia using slow drilling hydraulic rig of capacity 300 PSIG and above 1100 cmf and above in all types of strata, including over burden pressure, Fixing of casing pipes, co...

•

Providing and fixing 140 MM OD HDPE Percolator Pipe Joining Coupling adapters for fixing with self-screws to the HDPE Pipe while lowering to the Bore. The cost includes all materials, labour, Installa...

•

Supply, lowering, and fixing 140 MM PE-80 HDPE Pipe PWC 6kg/Cm2 to insert in Injection well. Pipes perforation includes 8 mm Spirally perforated holes at 30 mm Intervals throughout the pipe resulting ...

•

Providing and fixing 140 MM OD HDPE End Cap to be placed at the top of perforated pipe. The cost includes all materials, labour, Installation, and machinery job. Work is to be completed as per the ins...

•

Supply, lowering, and fixing 140 MM Dia RWH HDPE Pipe PE-80 PWC 6kg/Cm2 above the V-wire screen with fixtures. The cost includes all materials, labour, Installation, and machinery job. Work is to be c...

•

Providing and fixing 15 mm Dia lifting handles with flat washer and Locking nut for RCC precast closed/ perforated slabs. Handles treated with grit blasting and spray galvanizing with zinc metal coati...

•

Supply, transportation, lowering, and installation of heavy-duty precast concrete segmented rings with an external diameter of 1500 mm, a height of 200 mm, and a wall thickness of 90 mm, designed to m...

•

Supply, lowering & Fixing of Precast RCC rings outer dia 1500 mm, 0.15 m height with thickness 150 mm Base & Step up with 75 MM in each for well steining works of RCC M20 grade concrete using 20 mm do...

•

Supply, lowering & Fixing of Precast RCC M-20 grade 1340 mm outer diameter x 75 mm thickness 2 half round slabs with 8 mm TMT Rods, placed in the Slab. Provision of holes for lifting handle is to made...

•

Supply, lowering & Fixing of Precast RCC M-20 Grade 1340 mm diameter x 75 mm thickness with 32 mm-perforated holes(provision of lifting handles) and 8 mm TMT Rods placed in 2 half round Slab, the typi...

•

Supply, transportation, lowering, and installation of heavy-duty precast concrete segmented rings with an external diameter of 2600 mm outer dia 200 MM height,100 MM wall thickness, Having High Struc...

•

Supply, transportation, lowering, and installation of heavy-duty precast concrete segmented rings with an external diameter of - 3600 mm outer dia 200 MM height,125 MM wall thickness Having High Stru...

•

Supply, transportation, and installation of Pump servicing unit with 3 Ton Capacity Lifting unit ---- etc., complete with all lead

•

Supply, transportation, and installation of Delivery Side-Pipe & fittings The delivery piping system was fully fabricated as per site-specific requirements using high-quality components, including 2 n...

•

Supply, transportation, and installation of 7" heavy-duty metallic header unit with a 7" delivery outlet was supplied, complete with a 8" S-type metallic bend and flanged T.E., designed to accommodate...

•

Providing and Installation 7.5HP Rating 3 phase rainwater pumping unit Vertical type in standard material of construction with following Technical Specifications. Liquid To Be Pumped/ Sp. Gr. Water at...

•

Supply, transportation, and installation of - 539000 Litres Capacity of 11.3m dia X 5.67m ht. (539000 Ltr Cap), Included with (Grade G 300) Zincalume/Galvalume Corrugated Wall Tanks are the following...

•

Providing and fixing of 110mm outer dia PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting pipe with interlocking arrangement featuring leak proof push...

•

Providing and fixing of 110mm outer dia 90-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 110mm outer dia 45-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 110mm outer dia reducer bush PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement featuring...

•

Providing and fixing of 110mm outer dia Tee PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement featuring leak pro...

•

Providing and fixing of 125mm outer dia PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting pipe with interlocking arrangement featuring leak proof push...

•

Providing and fixing of 125mm outer dia 90-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 125mm outer dia 45-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 125mm outer dia reducer bush PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement featuring...

•

Providing and fixing of 140mm outer dia PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting pipe with interlocking arrangement featuring leak proof push...

•

Providing and fixing of 140mm outer dia 90-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 140mm outer dia 45-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 140mm outer dia Tee PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement featuring leak pro...

•

Providing and fixing of 140mm outer dia reducer bush PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement featuring...

•

Providing and fixing of 160mm outer dia PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting pipe with interlocking arrangement featuring leak proof push...

•

Providing and fixing of 160mm outer dia 90-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 160mm outer dia 45-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 160mm outer dia Tee PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement featuring leak pro...

•

Providing and fixing of 160mm outer dia reducer bush PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement featuring...

•

Providing and fixing of 180mm outer dia PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting pipe with interlocking arrangement featuring leak proof push...

•

Providing and fixing of 180mm outer dia 90-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 180mm outer dia 45-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 50mm Pressure reducing Valve Screwed / Flange ended made of cast stainless steel material, dimensions L-120mm, H-120mm, CV-25mm, maximum working pressure -16kg/cm2 with 150 x 1...

•

Providing and fixing of 200mm outer dia PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting pipe with interlocking arrangement featuring leak proof push...

•

Providing and fixing of 200mm outer dia 90-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers/Grey Rainwater harvesting fitting with Interlocking arrangement f...

•

Providing and fixing of 200mm outer dia 45-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers/Grey Rainwater harvesting fitting with interlocking arrangement f...

•

Providing and fixing of 200mm outer dia Tee PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement featuring leak pro...

•

Providing and fixing of 200mm outer dia reducer bush PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement featuring...

•

Providing and fixing of 225mm outer dia PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting pipe with interlocking arrangement featuring leak proof push...

•

Providing and fixing of 225mm outer dia 90-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 225mm outer dia 45-degree adaptor bend PWC 6.3 Kg/Sq.cm High Polymer Polyethylene with suitable UV Stabilizers / Grey Rainwater harvesting fitting with interlocking arrangement...

•

Providing and fixing of 50mm continuous Acting vacuum Relief valve manufactured out of durable weather resistant and non-corrosive reinforced polyamide, minimum sealing pressure: psi, working pressure...

•

Providing and fixing of 8" x 9" L-Angular Clamps/ Pipe holding clamps with 110mm C clamps (SS-304) -bolts & nuts. The clamping sets are Grit blasted, spray Galvanized with Zinc metal coating. Zinc Met...

•

Providing and fixing of 12" x 14" L-Angular Clamps/ Pipe holding clamps with 140mm C clamps (SS-304) -bolts & nuts. The clamping sets are Grit blasted, spray Galvanized with Zinc metal coating. Zinc M...

•

Providing and fixing of 24" x 18" L-Angular Clamps/ Pipe holding clamps with 160mm C clamps (SS-304) -bolts & nuts. The clamping sets are Grit blasted, spray Galvanized with Zinc metal coating. Zinc M...

•

Providing & Fixing of Rain catchers Filter Model RC-875 should be Designed to withstand all intensity of rainfall ranges from 5 mm to 75 mm per hour, Filter should be suitable from the range of 50 To ...

•

Providing & Fixing of Rain catchers Filter Model RC-1650should be Designed to withstand all intensity of rainfall ranges from 5 mm to 75 mm per hour, Filter should be suitable from the range of 50 To ...

•

Providing & Fixing of Rain catchers Filter Model RC-4000 should be Designed to withstand all intensity of rainfall ranges from 5 mm to 75 mm per hour, Filter should be suitable from the range of 50 To...

•

Providing & Fixing Flush Out arrangement: 6" x 6" x 6" Flange welded Metallic Reducer tee 1 no, 6" dia Butterfly Valve handle type - 1 no, 160 MM - LNPE - 3 nos, 6" T.E Flanges - 3 nos, 6" Rubber Gask...

•

Providing & Fixing Metallic Y - Connection 8" x 6" x 9" Uint: Including fittings link, 160 MM - EF LNPE -1 nos, 200 MM - EF LNPE -1 nos, 225 MM - EF LNPE 1 nos, 6", 8", & 9" T.E Flanges - are Grit B...

•

Providing & Fixing 8" heavy-duty metallic header unit horizontally positioned with a 8" delivery outlet was supplied, designed to accommodate a shut-off arrangement on one end and a delivery pipe con...

•

Providing and installation 200MTR3 / Hour "V"- wire technique SAND & ACTIVATED CARBON FILTER FOR water Filtration dia 1000mm,height 1350mm thickness 5mm with Inlet 150 & outlet 100 mm :The filter is ...

•

Providing and Installation Backwash System: 150 MM DI Double Flanged Eccentric Butterfly Valve PN16- 2 nos, 100MM DI double flanged wafer type butterfly valves PN10 -1 nos ,80 mm DI double flanged waf...

•

Providing and fixing of 150mm Reflux valve (flanged) made of cast iron, non-clogging and self-cleaning mechanism, dimensions L-400mm, H-400mm, T-21mm, pressure rating 150-300m =PN 10, body test :1.5 t...

•

PROVIDING RAINWATER HARVESTING SYSTEM IN THE PREMISES OF CHIKKAMAGALURU INSTITUTE OF MEDICAL SCIENCE, CHIKKAMAGALURU. (Electrical Works)

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for wo...

•

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities. ---- etc., complete with all lead

•

Supplying and fixing HRC fuse units base on existing switch / panel board. 32 to 63 A ---- etc., complete with all lead

•

Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703. upto 63 A ---- etc., complete with all lead

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying, fixing and wiring rotary selector switch suitablefor Ammeter ---- etc., complete with all lead

•

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter ---- etc., complete with all lead

•

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- etc., complete with all lead

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved ...

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Providing and laying Double wall Corrugated hDPE pipes for Electrical. Telecommunication & Signalling lines having flexibility & anti termite, anti corrosive, good abrasion, fatigue strength & UV resi...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Technical Specification final.docx

Instructions to Tenderers • 0.11 MB

KW-4 RWHS 2030 Call-2.docx

Tender Document • 1.31 MB

Ready to Participate?

Download all tender documents and submit your bid